基于悬臂梁称重传感器的圆弧刀研磨力测量仪设计

为解决双圆锥形圆弧刀研磨力在线测量难题,设计了杠杆原理为基础的圆弧刀研磨力测量仪,建立了圆弧刀与磨盘之间研磨力数学模型。该仪器采用悬臂梁称重传感器,并以DSP2812为主控芯片,实现了圆弧刀研磨力的在线采集、处理、存储及实时显示等功能。实验表明:仪器的称重传感精度优于0.15 N,圆弧刀研磨力变化范围降低28.8%,满足圆弧刀研制的需求。该仪器性能稳定,具有较好的实用价值,为高质量的圆弧刀研制和光栅刻划技术提供了技术保障。     

Rheological behavior of two-phase polymer melts

Rheological behavior of dispersed two-phase polymer melts has been investigated by means of a capillary rheometer. The two-phase systems chosen for study were blends of two polymers: high-density polyethylene and polystyrene, which are incompatible in the molten state. In order to investigate the state of dispersion, photographs were taken of the microstructure of extrudate samples, showing that the polystyrene forms long fibers or droplets as a discrete phase dispersed in the polyethylene which forms a continuous phase. Measurements were made of the axial pressure distributions of the two-phase molten polymers flowing through circular tubes, which permit one, according to the theory advanced by Han, to determine viscous and elastic properties of the melts. Also measured was melt die swell ratio. It has been found from the two independent experimental techniques that there exist a maximum and/or minimum elastic property at a certain blending ratio, and that the elastic property decreases first with L/D ratio of a capillary and then levels off.     

一种低功耗的无线传感器网络MAC协议

在无线传感器网络中,为了避免不必要的能耗而达到延长网络寿命的目的,提出一种低功耗的无线传感器网络MAC协议。此协议在低功率侦听(LPL)基础上进行修改,通过前一次轮询的结果来推测这一次的流量状况,根据流量状况自适应调整侦听睡眠周期结构中相应的占空比,从而降低能耗。通过编程仿真并结合实验,对此模型进行验证,证明了此算法能降低能耗。     

机车车载漏电流数字传感器研究与应用

介绍一种机车车载漏电流数字传感器的研究与应用,在模拟漏电流传感器的基础上,经数字化改进而实现.硬件设计采用ARM平台,在分析系统原理的基础上,完成了硬件系统和软件架构的设计,完成了单线和双线的模拟实验.经模拟实验验证检测准确、反应快速,通信采用CAN总线安全可靠.在实际测量中,验证了模拟实验的正确性,设计可行.     

聚合物固载催化剂的研究进展

介绍聚合物固载催化剂有6类,包括离子交换树脂催化剂,聚合物固载的相转移催化剂,聚合物固载的酸催化剂,聚合物固载的碱催化剂,聚合物固载的金属催化剂,聚合物固载的生物催化剂等。综述了近年来聚合物固载催化剂的研究进展。     

Manufacturing and foaming of high melt viscosity of polypropylene by using electron beam radiation technology

The high melt viscosity of polypropylene was studied by grafting bifunctional monomers, 1,6‐hexanediol diacrylate (HDDA) and tripropylene glycol diacrylate (TPGDA), onto homopolypropylene (HPP) and random ter‐polypropylene (RTPP) under electron‐beam irradiation. Creation of the high‐melt‐viscosity polypropylene was possible at low radiation dosage and low monomer content, under a prohibition of both radiation degradation and homopolymerization. TPGDA monomer was more effective in increasing the melt viscosity of HPP compared with RTPP, whereas HDDA monomer was more effective for enhancing the melt viscosity of RTPP. Such different effects of monomers on melt viscosity may arise from different monomer structures, namely, TPGDA has additional three methyl groups, but HDDA has no methyl groups. Electron‐beam radiation technology, on an increase of the melt viscosity, was much more effective in HPP than RTPP, when compared with virgin polymers. Modified RTPP and HPP with high melt viscosity were capable of foaming with numerous fine cells, of which the modified HPP with 1.5 mmol TPGDA and 0.5 kGy could create more spherical foam cells and its bending strength was 1.5 times more than that of the foamed RTPP. POLYM. ENG. SCI., 46:431–437, 2006. © 2006 Society of Plastics Engineers.     

基于STM32平台的CAN总线车载式漏电流数字传感器

介绍一种基于STM32平台的CAN总线车载式漏电流数字传感器的设计。在高精度模拟漏电流传感器的基础上,采用CAN总线进行数据通信,在目前高端的、低功耗、小系统设计处理器Cortex—M3(STM32)上经数字化改进而实现。该漏电流数字传感器经实验验证检测准确、响应快速、数据通信安全可靠,是目前一种先进的车载式漏电流数字传感器。实际使用时,由多个漏电流数字传感器与一台计算机互接,构成一个多点的漏电检测网络,最终实现漏电检测的综合处理。     

Efective Object Identification and Association by Varying Coverage Through RFID Power Control简

This paper presents an effective power scheduling strategy for energy efficient multiple objects identification and association. The proposed method can be utilized in many heterogeneous surveillance systems with visual sensors and RFID （radio-frequency identification） readers where energy efficiency as well as association rate are critical Multiple objects positions and trajectory estimates are used to decide the power level of RFID readers. Several key parameters including the time windows and the distance separations are defined in the method in order to minimize the effects of RFID coverage uncertainty. The power cost model is defined and incorporated into the method to minimize energy consumption and to maximize association performance. The proposed method computes the power cost using the range of the outermost position for possible single association and group associations at every sampling time. An RFID reader is activated with the proper coverage range when the power cost for the current time is lower than the power cost for the next time sample. The simplicity of the power cost model relieves the problematic combinatorial comparisons in multiple object cases. The performance comparison simulation with the minimum and maximum energy consumption shows that the proposed method achieves fast single associations with less energy consumption. Finally, the realistic comparison simulation with the fixed range RFID readers demonstrates that the proposed method outperforms the fixed ranges in terms of single association rate and energy consumption.     

Communicating Is Crowdsourcing: Wi-Fi Indoor Localization with CSI-Based Speed Estimation

Numerous indoor localization techniques have been proposed recently to meet the intensive demand for location-based service (LBS). Among them, the most popular solutions are the Wi-Fi fingerprint-based approaches. The core challenge is to lower the cost of fingerprint site-survey. One of the trends is to collect the piecewise data from clients and establish the radio map in crowdsourcing manner. However the low participation rate blocks the practical use. In this work, we propose a passive crowdsourcing channel state information (CSI) based indoor localization scheme, C²IL. Despite a crowdsourcing based approach, our scheme is totally transparent to the client and the only requirement is to connect to our 802.11n access points (APs). C²IL is built upon an innovative method to accurately estimate the moving speed solely based on 802.11n CSI. Knowing the walking speed of a client and its surrounding APs, a graph matching algorithm is employed to extract the received signal strength (RSS) fingerprints and establish the fingerprint map. For localization phase, we design a trajectory clustering based localization algorithm to provide precise real-time indoor localization and tracking. We develop and deploy a practical working system of C²IL in a large office environment. Extensive evaluations indicate that the error of speed estimation is within 3%, and the localization error is within 2 m at 80% time in a very complex indoor environment.     

在线红外检测仪在头孢噻肟酸合成中的应用

利用在线红外检测仪ReactIRTM4000在线监测以7-氨基头孢烷酸(7-ACA)与2-甲氧亚氨基-2-(2-氨基-4-噻唑基)-硫代乙酸苯并噻唑酯(MEAM)为原料,用二甲基乙酰胺(DMA)作催化剂,一步合成头孢噻肟酸的实验过程,主要考察了反应时间对反应的影响。在最佳反应条件下(催化剂用量、反应物用量、结晶pH已经优化)头孢噻肟酸的合成摩尔收率超过98%。