Identifying the capacity gains of multihop cellular networks

Claims for the advantages of applying multihop relay in CDMA cellular networks have been widely accepted in the literature. However, such claims have yet to be closely examined. In this paper, capacity increase in CDMA cellular networks through multihop relay is quantified. As CDMA networks are interference-limited, interference has to be analyzed to estimate the system capacity. Toward this end, we derive formulas to calculate interference experienced in multihop CDMA cellular networks by both base stations and mobile terminals. The formulas are generic and applicable whether or not power control is exercised between mobile terminals. The capacity of multihop CDMA cellular network is compared to that of single hop CDMA cellular network to verify the claimed advantage. We demonstrate that a 23% capacity increase is achieved when relaying with power control. We also extend the work to illustrate the effect of call distribution on the capacity of the cell and its neighbors – both in the single and multiple hop cases. Furthermore, we ascertain that call distribution inside a cell hardly affects the capacity of adjacent cells when using multihop relay. This specific advantage overcomes the inherent capacity degradation caused by near border calls, which is the biggest burden on the capacity of single hop CDMA cellular networks. To the best of our knowledge, this effort is the first of its kind in this area.     

Causes, Effects, Benefits, and Remedies of Change Orders on Public Construction Projects in Oman

Change orders are usually issued to cover variations in scope of work, material quantities, design errors, and unit rate changes. This paper discusses variations in public construction projects in Oman by investigating causes of variations, studying their effects on the project, identifying the beneficial parties, and suggesting remedies to alleviate related problems. Tasks included an analysis of four actual case studies and conducting a field survey via a questionnaire. It was determined that the client’s additional works and modifications to design were the most important factors causing change orders, followed by the nonavailability of construction manuals and procedures. The most important effects of change orders on the project were found to be the schedule delays, disputes, and cost overruns. The contractor was found to be the party most benefiting from the change orders followed by the consultant and then the client. A set of remedial actions were suggested and respondents viewed that the revision of registration of consulting offices would be the most important action followed by establishing standard documents for design procedures and building a national database about soil conditions and services.     

New program with new approach for spectral data analysis

This article presents a high-throughput computer program, called EasyDD, for batch processing, analyzing and visualizing of spectral data; particularly those related to the new generation of synchrotron detectors and X-ray powder diffraction applications. This computing tool is designed for the treatment of large volumes of data in reasonable time with affordable computational resources. A case study in which this program was used to process and analyze powder diffraction data obtained from the ESRF synchrotron on an alumina-based nickel nanoparticle catalysis system is also presented for demonstration. The development of this computing tool, with the associated protocols, is inspired by a novel approach in spectral data analysis.     

Estimation of local extreme suspended sediment concentrations in California Rivers

The total amount of suspended sediment load carried by a stream during a year is usually transported during one or several extreme events related to high river flow and intense rainfall, leading to very high suspended sediment concentrations (SSCs). In this study quantiles of SSC derived from annual maximums and the 99th percentile of SSC series are considered to be estimated locally in a site-specific approach using regional information. Analyses of relationships between physiographic characteristics and the selected indicators were undertaken using the localities of 5-km radius draining of each sampling site. Multiple regression models were built to test the regional estimation for these indicators of suspended sediment transport. To assess the accuracy of the estimates, a Jack-Knife re-sampling procedure was used to compute the relative bias and root mean square error of the models. Results show that for the 19 stations considered in California, the extreme SSCs can be estimated with 40-60% uncertainty, depending on the presence of flow regulation in the basin. This modelling approach is likely to prove functional in other Mediterranean climate watersheds since they appear useful in California, where geologic, climatic, physiographic, and land-use conditions are highly variable.     

Power reclamation efficiency of a miniature energy‐harvesting device using external fluid flows

This study represents experimental results related to the energy‐harvesting capability of a miniature power reclamation device based on external liquid flows. The device's reclamation principle depends on the conversion of mechanical energy into electrical energy. The mechanical energy in the device was generated by capturing vibrations caused by external liquid flows via the device's tails, which were designed by taking inspiration from the body shape of the black ghost knife fish, Apteronotus albifrons. The reclaimed power was obtained through magnetic polarization, which was generated by rotating circular waterproof magnet structures as a result of rotating movements of the mentioned tails and is transferred to 3.76 V (Ni‐Mg) batteries. Power reclamation was also simulated using COMSOL 4.2a software in order to compare the maximum reclaimable theoretical energy‐harvesting capacity with the experimental results. Experimental tests were performed within a range of flow velocities (1.0 ~ 5.0 m/s) for various fluid densities (plain water, low‐salt water and high‐salt water) in order to obtain extensive experimental data related to the device in response to external fluid flows. According to experimental results, the device could generate powers up to 17.2 W. On the other hand, the maximum reclaimable power was obtained at 25.7 W from COMSOL Multiphysics 4.2a simulations. Promising energy harvesting results imply that the output from this device could be used as a power source in many applications such as in lighting and global positioning system (GPS) devices. Copyright © 2014 John Wiley & Sons, Ltd.     

Islamic perspectives on conflict management within project managed environments

The purpose of this paper is to examine Islamic perspectives on conflict management within project managed environments. Existing research does not reveal any study that examines empirically the Islamic viewpoint on conflict management in contemporary organisational contexts but does indicate that conflict in Islam is considered to be inevitable and a part of human nature, and, if managed properly, is positive and constructive. This paper aims to address this gap, by presenting an empirical analysis of Islamic models of conflict management. It is argued that the three Islamic models discussed, are partially and covertly in existence in environments not traditional to their own. Consequently, the paper finds that there is scope for investigating explicit applied aspects to these Islamic models. The paper concludes that existence of Islamic models for conflict management is visible and has potential for application by project managers without limitation.     

Chemical treatment of sludge: in-depth study on toxic metal removal efficiency, dewatering ability and fertilizing property preservation

The presence of toxic metals in municipal sewage sludge restricts the application of this biomass in agricultural area. A chemical leaching process using a combination of inorganic acid and two oxidants has been developed for sludge decontamination. The present study investigated the effects of the concentrations of sulphuric acid (H2SO4), hydrogen peroxide and ferric chloride on metal solubilization from sewage sludge, as well as preservation of fertilizing properties (nutrient content) and dewatering ability of the treated sludge. The analysis of the results from batch leaching tests has allowed to define the optimal conditions for the reagent concentrations, which are 56 kg Fe3+ tonne(-1) of dry sludge solids (tds), 8 kg H2O2 tds(-1), and enough H2SO4 to reach a pH between 2.0 and 2.5 but less than 142 kg H2SO4 tds(-1). Finally, under these conditions, oxidoreduction potential values are found to be between 450 and 475 mV.     

Effect of off-south orientation on optimum conditions for maximum solar energy absorbed by flat plate collector augmented by plane reflector

A complete analysis of the off-south oriented, simple flat plate collector, augmented by flat sheet specular reflector, is developed. The enhancement of heat flux absorbed by solar collector due to the use of reflector is calculated as a funciton of solar altitude and azimuth angles, off-south orientation angle of collector and relative sizes and tilt angles of both collector. The shading effect due to the presence of the reflector is considered in the analysis. The collector and reflector variables are optimized for maximum solar energy flux absorbed by the collector during a pre-specified period of time. The Hooke and Jeeves optimization technique has been used in the analysis.     

Characterization of the draping behavior of jute woven fabrics for applications of natural‐fiber/epoxy composites

In this study, we investigated the draping behavior of jute woven fabric to study the feasibility of using natural fabrics in place of synthetic glass‐fiber fabrics. Draping behavior describes the in‐mold deformation of fabrics, which is vital for the end appearance and performance of polymer composites. The draping coefficient was determined with a common drapemeter for fabrics with densities of 228–765 g/m² and thread counts under different humidity and static dynamic conditions. The results were compared to glass‐fiber fabrics with close areal densities. Characterization of the jute fabrics was carried out to fill the knowledge gap about natural‐fiber fabrics and to ease their modeling. The tensile and bending stiffnesses and the shear coupling were also characterized for a plain woven jute fabric with a tensile machine, Shirley bending tester, and picture frame, respectively. As a case study, the draping and resin‐transfer molding of the jute fabric over a complex asymmetric form was performed to measure the geometrical conformance. The adoption of natural fibers as a substitute for synthetic fibers, where the strength requirements are satisfied, would thus require no special considerations for tool design or common practices. However, the use of natural fibers would lead to weight and cost reductions. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1453–1465, 2013     

FTIR evaluation of functional groups involved in the formation of haloacetic acids during the chlorination of raw water

This work investigated the formation potential of haloacetic acid (HAA) compounds in the raw water for the Bangkhen water treatment plant (Bangkok, Thailand). The resin adsorption technique (with three different types of resins, i.e. DAX-8, AG-MP-50 and WA-10) was employed to characterize the organic content in the raw water into six fractions, i.e. hydrophobic neutral (HPON), hydrophobic acid (HPOA), hydrophobic base (HPOB), hydrophilic neutral (HPIN), hydrophilic acid (HPIA) and hydrophilic base (HPIB). Hydrophilic species appeared to be the predominant organic species in this water source (approximately 60%) with the neutral fraction being the most abundant (approximately 40%). Hydrophobic species, on the other hand, played the most important role in the formation of haloacetic acids as they contributed to as much as approximately 56% of total HAA formation potential. Among the three hydrophobic species, the hydrophobic base exhibited the highest specific HAA formation with 208mugHAAs/mg of dissolved organic carbon (DOC). Each organic fraction was examined for its associated functional groups by Fourier transform infrared (FTIR). The investigation of the formation of HAAs was achieved by tracking the changes in the FTIR results of the same water sample before and after the chlorination reaction. Based on the results obtained from this study, carboxylic acids, ketone, amide, amino acids and aromatic characteristic organics seemed to be the main precursors to HAA formation.