Graph‐Theory Approach to Eigenvalue Problem of Large Space Structures

The dynamic analysis and control system design of large space structures involve the solution of the large‐dimensional generalized matrix eigenvalue problem. The computational effort involved is proportional to the third power of the dimension of the matrices involved. To minimize the computational time a graph‐theory approach to reduce a matrix to lower‐ordered submatrices is proposed. The matrix‐reduction algorithm uses the Boolean matrices corresponding to the original numerical matrices and, thus, the computational effort to reduce the original matrix is nominal. The computational savings directly depend upon the number of submatrices into which the original matrix is reduced. A free‐free square plate is considered as an example to illustrate the technique. In this example a matrix of 16th order is reduced to three scalars corresponding to three rigid‐body modes, and three matrices of order three and one matrix of order four.     

Wavelet packet based channel equalization

Recently, considerable amount of attention is being given to the field of wavelets and wavelet packets. It has found numerous applications in signal representation, image compression and applied mathematics. In this paper, we present a channel equalization method based on wavelet packets. The proposed equalizer structure is based on the fact that for sufficiently narrowband sequences, a non-ideal channel can be modelled as an attenuation and delay. If the data sequence is used to modulate a set of narrowband wavelet packets, then no equalization is required at the receiver end. The equalization problem reduces to that of determining the delay introduced by the channel for each of the wavelet packets. A minimum square variance algorithm for adaptively choosing the delay has been proposed. This algorithm has been shown to perform as desired analytically in a simple delay channel case. Simulations have been used to study its performance in the non-ideal channel’s case and the results corroborate theoretical predictions.     

Future technology challenges in distributed interactive simulation

The paper examines the changes in computer and communications capabilities over the next 10-15 years which are most likely to affect the central components of distributed interactive simulation (DIS): manned simulators, synthetic environments, and semi-automated forces (SAF). Because these components of DIS are currently very resource intensive, improvements in computer and communications capabilities translate into direct and immediate improvements in DIS capabilities. These improved capabilities in turn allow DIS to contribute in much broader arenas, enhancing troop readiness and reducing system acquisition costs. These improvements will not all come automatically, however. Substantial planning is required to ensure that DIS can take advantage of the coming changes, rather than being overcome by them     

Mixed convection boundary layer flow of a micropolar fluid along vertical cylinders and needles

An analysis is presented to investigate the effects of buoyancy and curvature on convection along vertical cylinders and needles placed in a micropolar fluid. The governing equations for momentum, angular momentum and energy are solved numerically by finite difference scheme. The heat transfer results are presented for a range of values of the buoyancy parameters, the curvature parameter and the material parameters of the fluid. The effect of the microrotation boundary conditions on heat transfer is discussed.     

Finite data performance analysis of MVDR beamformer with andwithout spatial smoothing

The finite-data performance of a minimum-variance distortionless response (MVDR) beamformer is analyzed with and without spatial smoothing, using first-order perturbation theory. In particular, expressions are developed for the mean values of the power gain in any direction of interest, the output power, and the norm of the weight-error vector, as a function of the number of snapshots and the number of smoothing steps. It is shown that, in general, the smoothing, in addition to decorrelating the sources, can alleviate the effects of finite-data perturbations. The above expressions are reduced to the case in which no spatial smoothing is used. These expressions are valid for an arbitrary array and for arbitrarily correlated signals. For this case, an expression for the variance of the power gain is also developed. For a single interference case it is shown explicitly how the SNR, spacing of the interference from the desired signal and the correlation between them influence the beamformer performance. Simulations verify the usefulness of the theoretical expressions     

Nutritional aspects of colon cancer

During the last decade, a substantial amount of progress has been made in the understanding of the relationship between the dietary constituents and the development of colon cancer in man. The information base is sufficiently convincing with respect to an enhancing effect as a function of total fat intake and a protective effect of certain dietary fibers in colon cancer. The populations with high incidence of colon cancer are characterized by consumption of high-dietary fat which may be a risk factor in the absence of factors that are protective, such as use of whole-grain cereals, high fibrous foods and vegetables mainly of cruciferous type. Application of the findings made thus far in colon cancer research for the general public is, therefore, to have a far-reaching impact on the major premature, killing diseases in the western world.     

Conductivity study of polyethylene oxide (PEO) complexed with sodium bicarbonate

Ion conducting thin film polymer electrolytes based on polyethylene oxide (PEO) complexed with NaHCO₃ salt has been prepared using solution-cast technique. The complexation of NaHCO₃ salt with PEO is confirmed by XRD and IR studies. DC conductivity in the temperature range 303–368 K has been evaluated. The conductivity is found to increase in the PEO complex with the NaHCO₃ salt and also with an increase in temperature. Using this polymer electrolyte, an electrochemical cell with the configuration Na/(PEO + NaHCO₃)/(I₂ + C + electrolyte) has been fabricated and its discharge characteristics studied. Open Circuit Voltage (OCV) and Short Circuit Current (SCC) are found to be 2.69 V and 1.28 mA, respectively. Other parameters associated with the cell are evaluated and presented in this paper.     

Two-tier architecture for unconstrained handwritten character recognition

In this paper, we propose an approach that combines the unsupervised and supervised learning techniques for unconstrained handwritten numeral recognition. This approach uses the Kohonen self-organizing neural network for data classification in the first stage and the learning vector quantization (LVQ) model in the second stage to improve classification accuracy. The combined architecture performs better than the Kohonen self-organizing map alone. In the proposed approach, the collection of centroids at different phases of training plays a vital role in the performance of the recognition system. Four experiments have been conducted and experimental results show that the collection of centroids in the middle of the training gives high performance in terms of speed and accuracy. The systems developed also resolve the confusion between handwritten numerals.     

Properties of ligno‐cellulose fiber Hildegardia

Studies on some properties such as the density, the degradation temperatures, the morphology and the spectral features of the ligno‐cellulose fiber Hildegardia were carried out in both untreated and alkali treated form. The fibers are found to have good morphology and moderate initial and final degradation temperatures. On alkali treatment, the lignin was found to be eliminated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2216–2221, 2002     

Sequentially Enhanced Electrokinetic Remediation of Heavy Metals in Low Buffering Clayey Soils

This paper presents the results of an experimental investigation undertaken to evaluate different purging solutions to enhance the removal of multiple heavy metals, particularly chromium, nickel, and cadmium, from a low buffering clay, specifically kaolin, during electrokinetic remediation. Experiments were conducted on kaolin spiked with Cr(VI), Ni(II), and Cd(II) in concentrations of 1,000, 500, and 250 mg/kg, respectively, which simulate typical electroplating waste contamination. A total of five different tests were performed to investigate the effect of different electrode purging solutions on the electrokinetic remedial efficiency. A constant DC voltage gradient of 1 V/cm was applied for all the tests. The removal of heavy metals from the soil using tap water as the purging solution was very low. When 1 M acetic acid was used as the purging solution in the cathode, the removal of chromium, nickel, and cadmium was increased to 20, 19, and 13%, respectively. Using 0.1 M ethylene diamine tetraacetic acid as the purging solution in the cathode, 83% of the initial Cr was removed; however, the nickel and cadmium removal was very low. A sequentially enhanced electrokinetic remediation approach involving the use of water as a purging solution at both the anode and cathode initially, followed by the use of acetic acid as the cathode purging solution and a NaOH alkaline solution as the anode purging solution was tested. This sequential approach resulted in a maximum removal of chromium, nickel, and cadmium of 68–71, 71–73, and 87–94%, respectively. This study shows that the sequential use of appropriate electrode purging solutions, rather than a single electrode purging solution, is necessary to remediate multiple heavy metals in soils using electrokinetics.