Correlation Between Charge, Spin and Lattice in La–Eu–Sr Manganites

To understand the structural, electrical, magnetic, elastic and anelastic properties of La_0.67?x Eu _x Sr_0.33MnO₃ (0.30≤x≤0.39) manganites, a series of samples was prepared by citrate gel route. X-ray diffraction studies along with Rietveld analysis indicate the samples crystallize in single phase with Pnma space group. Studies on the variations of magnetization with temperature indicate that the Curie transition temperature (T _C) decreases with increasing Eu content. Furthermore, Eu substitution is found to increase the electrical resistivity and significantly enhances the colossal magnetoresistance effect, while it is found to decrease the characteristic metal–insulator transition temperature (T _P). On analyzing the electrical resistivity data, it has been concluded that the resistivity below T _P can be explained based on electron–electron, electron–phonon and two magnon scattering processes, while that above T _P, the adiabatic small polaron model is found to explain the observed behavior. Finally, the longitudinal modulus (L) and internal friction (Q ^?1) have been measured and a dramatic change in L (T) is observed at T _C, accompanied by a sharp peak in Q ^?1 (T). Simultaneous occurrence of magnetic, transport and lattice anomalous behavior at T _C indicate the presence of strong electron–phonon and spin–phonon interactions in these manganites.     

The structural influence of aluminium ions on emission characteristics of Sm3+ ions in lead aluminium silicate glass system

Optical absorption and photoluminescence characteristics of Sm³⁺ ions in lead silicate glasses mixed with different concentrations of Al₂O₃ (5–10 mol%) have been investigated. From these studies, the radiative properties viz., spontaneous emission probability A, the total emission probability, the radiative lifetime τ_R, the fluorescent branching ratio β of emission transition of ⁴G_5/2 → ⁶H_7/2 along with other transitions for Sm³⁺ have been evaluated and found to be the highest for the glass mixed with 8.0 mol% of Al₂O₃.The IR spectral studies have indicated that Al³⁺ ions do participate in the glass network with AlO₄ and AlO₆ structural units and further revealed that the concentration of octahedral aluminium ions induce bonding defects in the glass network. Such bonding defects are assumed to be responsible for low phonon losses in these glasses and lead to higher values of radiative parameters for the glass mixed with 8.0 mol% of Al₂O₃.     

Effect of annealing temperature on electrical properties of Au/polyvinyl alcohol/n-InP Schottky barrier structure

In the present work, thin film of polyvinyl alcohol (PVA) is fabricated on n-type InP substrate as an interfacial layer for electronic modification of Au/n-InP Schottky contact. The electrical characteristics of Au/PVA/n-InP Schottky diode are determined at annealing temperature in the range of 100-300 °C by current-voltage (I-V) and capacitance-voltage (C-V) methods. The Schottky barrier height and ideality factor (n) values of the as-deposited Au/PVA/n-InP diode are obtained at room temperature as 0.66 eV (I-V), 0.82 eV (C-V) and 1.32, respectively. Upon annealing at 200 °C in nitrogen atmosphere for 1 min, the barrier height value increases to 0.81 eV (I-V), 0.99 eV (C-V) and ideality factor decreases to 1.18. When the contact is annealed at 300 °C, the barrier height value decreases to 0.77 eV (I-V), 0.96 eV (C-V) and ideality factor increases to 1.22. It is observed that the interfacial layer of PVA increases the barrier height by the influence of the space charge region of the Au/n-InP Schottky junction. The discrepancy between Schottky barrier heights calculated from I-V and C-V measurements is also explained. Further, Cheung's functions are used to extract the series resistance of Au/PVA/n-InP Schottky diode. The interface state density as determined by Terman's method is found to be 1.04 × 10¹² and 0.59 × 10¹² cm^− 2 eV^− 1 for the as-deposited and 200 °C annealed Au/PVA/n-InP Schottky diodes. Finally, it is seen that the Schottky diode parameters changed with increase in the annealing temperature.     

Detection of central nervous system tissue on meat and carcass-splitting band saw blade surfaces using modified fluorescent glial fibrillary acidic protein enzyme-linked immunosorbent assay sampling and extraction procedures

This study was conducted to determine optimal buffer pH, extraction procedure, and temperature for detecting central nervous system (CNS) tissue on meat surfaces and on carcass-splitting band saw blades using swab sampling. Glial fibrillary acidic protein (GFAP) is restricted to CNS tissue and has been used as a marker for CNS tissue presence in meat products. Sample preparation, extraction procedure, and extraction temperature of glial fibrillary acidic protein fluorescent enzyme-linked immunosorbent assay (GFAP F-ELISA) were modified to detect CNS tissue on meat surfaces and on carcass-splitting band saw blades. Maximum GFAP recovery was observed with an extraction buffer pH of 7.4. Extracting samples at room temperature by vortexing for 30 s in 1 ml of extraction buffer (phosphate-buffered saline [pH 7.4] plus 0.05% sodium dodecyl sulfate) consistently provided detection of GFAP on meat surfaces contaminated with 500 microg of spinal cord suspension per 50 cm2 and on carcass-splitting band saw blades contaminated with 20 microg of spinal cord suspension per 50 cm2. Recovery of GFAP was not affected by storing samples overnight at 4 degrees C. The current studies demonstrate the effectiveness of modified sampling procedures and preparations, sample extraction buffer pH, and extraction temperatures. These modifications introduced to the original F-ELISA sampling protocol result in asensitive and repeatable assay for detection of CNS tissue on meat surfaces and on carcass-splitting band saw blades.     

Photovoltaic properties of SnS based solar cells

Polycrystalline thin films of tin sulphide have been synthesised using spray pyrolysis. The layers grown at a temperature of 350 °C had the orthorhombic crystal structure with a strong (1 1 1) preferred orientation. The films had resistivities 30 Ω cm with an optical energy band gap (E_g) of 1.32 eV. Heterojunction solar cells were fabricated using sprayed SnS as the absorber layer and indium doped cadmium sulphide as the window layer and the devices were characterised to evaluate the junction properties as well as the solar cell performance. The current transport across the junction has been modelled as a combination of tunnelling and recombination. The best devices had solar conversion efficiencies of 1.3% with a quantum efficiency of 70%.     

Structure and properties of high quality natural cellulose fibers from cornstalks

We have developed a fiber extraction method that produces fibers from cornstalks with mechanical properties similar to that of the common textile fibers. The fiber extraction method developed results in partial delignification and produces fibers from cornstalks that are suitable for textile and other industrial applications. The structure of the fibers obtained was investigated using X-ray diffraction and scanning electron microscope. The structure and composition of the natural cellulose fibers obtained from cornstalks are different than that of the common bast fibers such as flax and kenaf. Tensile properties of the fibers were studied using an Instron tensile tester. This study found that cornstalk fibers have relatively lower percent crystallinity but similar microfibrillar angle as that of the common bast fibers. The structure and properties of cornstalk fibers indicate that the fibers are suitable for producing various textile products.     

Investigation of Ferroelectricity in Poly(methyl vinylidene cyanide)

The ferroelectric and piezoelectric properties of newly synthesized polymer systems have been studied. To date PVDF and its copolymers P(VDF-TrFE) have provided the bulk of the knowledge pertaining to ferroelectricity in polymers. Recently, ultrathin ferroelectric films of P(VDF-TrFE) 70:30 have been fabricated using the Langmuir-Blodgett technique [4]. In this study, various new polymers have been synthesized by chemically altering the PVDF structure. This alteration was performed in order to enhance the amphiphilic nature of the polymer and thus improve the LB film quality and control. Various chemical groups have been used to replace the electropositive hydrogen and electronegative fluorine found in the traditional PVDF chemical structure, including Nitrile, Ester, and Methyl groups. In all cases the resulting chemical structure provides for a net dipole moment directed from the electronegative side of the monomer to the electropositive side. However, to obtain ferroelectricity these microscopic dipoles must first pack in a manner such that a reversible macroscopic dipole is obtained. Both structural and dielectric studies have been performed on a number of newly synthesized systems. The structural properties of these new materials were probed using both temperature-dependent x-ray diffraction and differential scanning calorimetry, while dielectric properties were investigated using electric field and temperature-dependent capacitance and polarization measurements.