Tailored blank welding between low carbon steel sheet and STS 304 stainless steel sheet by CO2 laser beam

A basic reseach of tailored blank welding between a low carbon steel sheet and a STS 304 stainless steel sheet was carried out with CO₂ laser beam. The materials used in this work were a low carbon steel sheet with a thickness of 0.9 mm and a STS 304 stainless steel sheet with the same thickness. Experiments were carried out by applying the Taguchi method to obtain optimized conditions in order to apply this tailored blank laser welding method in the practical manufacturing process. In order to compare the laser welding results with the conventional welding process, GTA welding was carried out for the same materials. Optical microscopy, SEM and XRD analyses were performed to observe the microstructures and to analyze the various phases. A tensile test, hardness test and Erichsen test were performed to evaluate the formability of welded specimens. In addition, immersion test was carried to estimate corrosion resistance. A WDS analysis showed that laser welding resulted in almost the same dilution of both low carbon steel and stainless steel in welded metal, meanwhile, GTA welding resulted in more dilution of stainless steel due to its slower heat conductivity. The formability of the laser welded specimen reached 83% of that in base metal. On the other hand, it was 63% in the case of GTA welding. During the tension test, base metal was fractured in the case of a laser welded specimen, meanwhile the welded zone was fractured in the case of the GTA welded specimen. The corrosion test showed that weight loss per unit area was less in the laser welded specimen than that of the GTA welded specimen.     

Differential Retinal Protein Expression in Primary and Secondary Retinal Ganglion Cell Degeneration Identified by Integrated SWATH and Target-Based Proteomics

To investigate the retinal proteins associated with primary and secondary retinal ganglion cell (RGC) degeneration and explore their molecular pathways, SWATH label-free and target-based mass spectrometry was employed to identify the proteomes in various retinal locations in response to localized optic nerve injury. Unilateral partial optic nerve transection (pONT) was performed on adult Wistar rats and their retinas were harvested 2 weeks later. To confirm the separation of primary and secondary RGC degeneration, immunohistochemistry of RNA binding protein with multiple splicing (RBPMS) and glial fibrillary acidic protein (GFAP) was performed on retinal whole-mounts. Retinal proteomes in the temporal and nasal quadrants were evaluated with high resolution hybrid quadrupole time-of-flight mass spectrometry (QTOF-MS), and SWATH-based acquisition, and their expression was compared to the corresponding retinal quadrant in contralateral control eyes and further validated by multiple reaction monitoring mass spectrometry (MRM-MS). A total of 3641 proteins (FDR < 1%) were identified using QTOF-MS. The raw data are available via ProteomeXchange with the identifier PXD026783. Bioinformatics data analysis showed that there were 37 upregulated and 25 downregulated proteins in the temporal quadrant, whereas 20 and five proteins were upregulated and downregulated, respectively, in the nasal quadrant, respectively (n = 4, p < 0.05; fold change ≥ 1.4-fold or ≤0.7). Six proteins were regulated in both the temporal and the nasal quadrants, including CLU, GFAP, GNG5, IRF2BPL, L1CAM, and CPLX1. Linear regression analysis indicated a strong association between the data obtained by means of SWATH-MS and MRM-MS (temporal, R² = 0.97; nasal, R² = 0.96). Gene ontology analysis revealed statistically significant changes in the biological processes and cellular components of primary RGC degeneration. The majority of the significant changes in structural, signaling, and cell death proteins were associated with the loss of RGCs in the area of primary RGC degeneration. The combined use of SWATH-MS and MRM-MS methods detects and quantifies regional changes of retinal protein expressions after localized injury. Future investigation with this integrated approach will significantly increase the understanding of diverse processes of progressive RGC degeneration from a proteomic prospective.     

Nanophase Decomposition of a Zn-Al Based Alloy Zn68Al10Cu22

The nanostructural evolution and phase transformation of the films of a Zn-Al based alloy (Zn68Al10Cu22 in wt pct)have been studied by using X-ray diffraction and scanning electron microscopy. Nanostructural thin films of the Zn-Al based alloy were produced by using an electron beam deposition technique. It was found that a nanocrystalline phase η'n had a strong preferred crystal orientation at (0002) crystal planes in the as-deposited films. During ageing at 220℃, the decomposition of nanophase η'n started with clustering to form Z-zones, and transitional phase, which was accompanied by an eutectoid decomposition of the η'n phase: η'n→β'eut T'. Decomposition, such as clustering and the formation of the Z-zones, and the transitional phase etc. were observed in the nanophaseβ'eut. The formation and the decomposition of the transitional phase of micrometers in size were involved in the decomposition of the main nanophase η'n. The mechanism of the Z-zones formation and the stability of nanophases were discussed.     

Emission wavelength dependence of fluorescence lifetimes of bacteriological spores and pollens

Concern about biological terrorism has greatly increased in the 21st century, and correspondingly, so has the need for accurate detection and identification of biological hazards, such as Bacillus anthracis. Optical techniques have been shown to be useful for this purpose. Use of fluorescence lifetimes as a function of emission wavelength for different materials using point- detection methods appears to be an additional viable option. Although the lifetimes range only between 2 and 6 ns, most biological materials tested in this study were distinguishable. A preliminary database has been compiled for use in a possible future detection system.     

Biodiesel production using enzymatic transesterification - Current state and perspectives

Biodiesel has attracted considerable interest in recent years as an alternative, biodegradable and nonpolluting transportation fuel. Conventional alkaline process for biodiesel production are energy-consuming and generate undesirable by-products such as soaps, that make difficult the separation and purification of biodiesel.Particular attention has been dedicated to the use of lipases as biocatalysts for biodiesel production due to their favorable conversion rate obtained in gentle conditions and relatively simple downstream processing steps for the purification of biodiesel and by-products. However, comparatively to conventional chemical processes, the major obstacles for enzymatic production of biodiesel remain the cost of lipases, the relatively slower reaction rate and lipases inactivation caused by methanol and glycerol.This review evaluates the current status and perspectives for enzymatic biodiesel production and indicates the key operational variables that influence lipase activity and stability together with the technological solutions for industrial implementation of enzymatic process.     

Structural and biomechanical characterizations of porcine myocardial extracellular matrix

Extracellular matrix (ECM) of myocardium plays an important role to maintain a multilayered helical architecture of cardiomyocytes. In this study, we have characterized the structural and biomechanical properties of porcine myocardial ECM. Fresh myocardium were decellularized in a rotating bioreactor using 0.1 % sodium dodecyl sulfate solution. Masson's trichrome staining and SEM demonstrated the removal of cells and preservation of the interconnected 3D cardiomyocyte lacunae. Movat's pentachrome staining showed the preservation of cardiac elastin ultrastructure and vascular elastin distribution/alignment. DNA assay result confirmed a 98.59 % reduction in DNA content; the acellular myocardial scaffolds were found completely lack of staining for the porcine α-Gal antigen; and the accelerating enzymatic degradation assessment showed a constant degradation rate. Tensile and shear properties of the acellular myocardial scaffolds were also evaluated. Our observations showed that the acellular myocardial ECM possessed important traits of biodegradable scaffolds, indicating the potentials in cardiac regeneration and whole heart tissue engineering.     

Porosification-reduced optical trapping of silicon nanostructures

Metal-assisted chemical etching (MACE) was carried out to fabricate solid silicon nanowires (s-SiNWs) and mesoporous silicon nanowires (mp-SiNWs). Total reflection and transmission were measured using an integrated sphere to study optical properties of the MACE-generated silicon nanostructures. Without NW aggregation, mp-SiNWs vertically standing on a mesoporous silicon layer trap less light than s-SiNWs over a wavelength range of 400-800 nm, owing to porosification-enhanced optical scattering from the rough inner surfaces of the mesoporous silicon skeletons. Porosification substantially weakens the NW mechanical strength; hence the elongated mp-SiNWs aggregate after 30 min etching and deteriorate optical trapping.     

An investigation into material-induced surface roughness in ultra-precision milling

This paper presents a theoretical and experimental investigation into the effect of the workpiece material on surface roughness in the ultra-precision milling process. The influences of material swelling and tool-tip vibration on surface generation in ultra-precision raster milling are studied. A new method is proposed to characterize material-induced surface roughness on the raster-milled surface. A new parameter is defined to characterize the extent of surface roughness profile distortion induced by the materials being cut. An experiment is conducted to compare the proposed method with surface roughness parameters and power spectrum density analysis method by machining three different workpiece materials. The results show that the presence of elastic recovery improves the surface finish in ultra-precision raster milling and that, among the three materials being cut in the experiment, aluminum bronze has the greatest influence on surface finish due to its highest elastic recovery rate and hardness. The results also show that, in the case of faster feed rates, the proposed method more efficiently characterizes material-induced surface roughness.