Evaluation of Reliability Indicators for WDNs with Demand-Driven and Pressure-Driven Models

Reliability of water distribution networks (WDNs) has received much attention in recent years due to progressive aging of infrastructures and climate change. Several reliability indicators, focusing on hydraulic aspects rather than water quality, have been proposed in literature. Reliability is generally assessed resorting to well established methods coupling hydraulic simulations and stochastic techniques that describe the WDNs hydraulic performance and component availability respectively. Two main algorithms are employed to simulate WDNs: the demand driven approach (DDA) that disregards the physical relationship between actual water demand and nodal pressure, and the pressure driven approach (PDA) that explicitly incorporates it. In this paper, we show how the choice of hydraulic solver may affect reliability indicators. We modify existing quantitative indicators at nodal and network level, and define novel indicators to consider water quality aspects. These indicators are evaluated for three example WDNs; discrepancies between results obtained with the two approaches depend on network size, feeding scheme and skeletonization. Results suggest to use with caution the DDA for reliability assessment at both local and global level.     

An efficient LMI approach for the quadratic stabilisation of a class of linear,uncertain, time-varying systems

The purpose of this article is to provide a numerically efficient method for the quadratic stabilisation of a class of linear, discrete-time, uncertain, time-varying systems. The considered class of systems is characterised by an interval time-varying (ITV) matrix and constant sensor and actuator matrices. It is required to find a linear time-invariant (LTI) static output feedback controller yielding a quadratically stable closed-loop system independently of the parameter variation rate. The solvability conditions are stated in terms of linear matrix inequalities (LMIs). The set of LMIs includes the stability conditions for the feedback connection of a unique suitably defined extreme plant with an LTI output controller and the positivity of a closed-loop extremal matrix. A consequent noticeable feature of the article is that the total number of LMIs is independent of the number of uncertain parameters. This greatly enhances the numerical efficiency of the design procedure.     

Thermal conductivity of ME771 glass-epoxy laminate from millikelvin temperatures to 4 K

Permaglas ME771 is a glass-epoxy laminate which is suitable for use at cryogenic temperatures. We have measured the thermal conductivity of a sample of this material between 64 mK and 4.2 K in the direction parallel to the reinforcing fibres, enabling us to make a comparison with the better known material G-10CR. The thermal conductivity follows the form that would be expected for such a material, and is similar to that of G-10CR, which has a similar (room temperature) tensile strength. We comment on some confusion that has arisen over the difference between G-10CR, a material specifically produced for cryogenic use, and G-10, the more common equivalent.     

Model-Supported Impact Assessment for the Water Sector in Central Germany Under Climate Change—A Case Study

Climate change challenges water managers and researchers to find sustainable management solutions, in order to avoid undesirable impacts on water resources, environment and water-dependent sectors. Needed are projections into the future for the main driving forces, the resulting pressures on water resources, and quantification of the impacts. Modeling studies can play an important role in investigating, quantifying, and communicating possible impacts of climate change, with account of uncertainty of the results. However, climate change related impacts and a need for adaptation still play a minor role in current river basin management plans that have to comply e.g. with the EU Water Framework Directive (WFD). One important reason is that climate impact assessment is generally done in research institutes, while management plans are designed by practitioners working in national and regional environmental agencies and water supply companies. Knowledge transfer from science to practice and visa versa is often missing. In the present study, we propose a methodology and a case study for model-supported decision making in the water sector applicable to a participatory water resources planning process. The methodology is applied in a case study investigating climate change impacts on water resources. The case study area is the German State of Saxony-Anhalt, where the task was to develop a climate change impact assessment including possible adaptation measures as basis for a federal adaptation directive.     

Application of near (NIR) infrared and mid (MIR) infrared spectroscopy as a rapid tool to classify extra virgin olive oil on the basis of fruity attribute intensity

A sensory analysis of 112 virgin olive oils was performed by a fully trained taste panel. The samples were divided in “defective” and “not defective” on the basis of their olfactory attributes. Then, the “not defective” samples were classified into “low”, “medium” and “high” according to the fruity aroma intensity perceived by assessors. All samples were also analysed by FT-NIR and FT-IR spectroscopy and processed by classification methods (LDA and SIMCA). The results showed that NIR and MIR spectroscopy coupled with statistical methods are an interesting technique compared with traditional sensory assessment in classifying olive oil samples on the basis of the fruity attribute. The prediction rate varied between 71.6% and 100%, as average value. The spectroscopic methods, combined with chemometric strategies, could represent a reliable, cheap and fast classification tool, able to draw a complete fingerprint of a food product, describing its intrinsic quality attributes, that include its sensory attributes.     

Synthesis of Autosymmetric Functions in a New Three-Level Form

Autosymmetric functions exhibit a special type of regularity that can speed-up the minimization process. Based on this autosymmetry, we propose a three level form of logic synthesis, called ORAX (EXOR-AND-OR), to be compared with the standard minimal SOP (Sum of Products) form. First we provide a fast ORAX minimization algorithm for autosymmetric functions. The ORAX network for a function f has a first level of at most 2(n−k) EXOR gates, followed by the AND-OR levels, where n is the number of input variables and k is the “autosymmetry degree” of f. In general a minimal ORAX form has smaller size than a standard minimal SOP form for the same function. We show how the gain in area of ORAX over SOP can be measured without explicitly generating the latter. If preferred, a SOP expression can be directly derived from the corresponding ORAX. A set of experimental results confirms that the ORAX form is generally more compact than the SOP form, and its synthesis is much faster than classical three-level logic minimization. Indeed ORAX and SOP minimization times are often comparable, and in some cases ORAX synthesis is even faster.     

Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results

Microwaves at 2.45 GHz have been applied to ignite the combustion synthesis of compacted Ti–Si–C powders mixtures, having 1:1:1 atomic ratio, in order to join SiC-based components. A mixture of different refractory phases such as TiC and TiSi₂ were obtained. Depending on the synthesis conditions, no residual silicon in the joint was detected, suggesting the suitability of the here proposed experimental joining approach for nuclear plants and high temperature applications. A simplified model was developed with the aim of obtaining a deeper understanding of the here proposed rapid, almost pressure-less and localized heating joining method. Experimental and numerical simulation results demonstrate that joining of SiC can be rapidly obtained with minimization of heat affected zones in the SiC substrates. Maximum apparent shear strength values of the joints ranged from 9.9 to 45.1 MPa, depending on the process conditions.     

Effect of the Phase Composition of Barium-Calcium Alumoscandates on the Emission Properties of Impregnated Cathodes

The effect of scandium oxide additions on the emission properties of impregnated tungsten cathodes was investigated. The synthesis of alumoscandates in the BaO ― CaO ― Sc₂O₃ ― Al₂O₃ system were studied by x-ray diffraction, thermography, and petrographic analysis. The hygroscopic properties of the emission-active material was determined. Based on the results of emission tests the recommended optimal compositions of emission-active material are 2.4 BaO·0.6 CaO·0.1 Sc₂O₃·0.9 Al₂O₃ and 2.6 BaO·1.9 CaO·0.1 Sc₂O₃·0.9 Al₂O₃. Cathodes based on these compositions had lifetimes greater than 10000 h operating in the temperature range 900-1000°C at current densities of 15-20 A/cm² in a vacuum of the order of 10⁻⁶ Torr.