低温送风系统末端装置诱导器的研究及性能评价

研究了在低温送风系统中诱导器(IDU)的结构特点、工作原理、送风方式,分析了诱导器送风口射流速度的特性,得出了诱导器空调系统的优缺点。     

游梁式抽油机间歇供电装置的研制与应用

针对游梁抽油机电动机效率低和井场窃电问题,研制了具有节电和防井场窃电功能的游梁抽油机调压+间歇供电装置。该装置通过控制可控硅的导通角实现在电动机做功期调压供电,在电动机发电期不供电。分析了间歇供电对电动机、抽油机和电网的影响;根据现场实测数据分析了该装置的节电效果及现场应用情况。该装置节电效果显著,能防止井场窃电,可用于对游梁抽油机电动机的长期驱动。     

催化重整装置进料/产物换热器泄漏的检测及判断

介绍了三种检测及判断催化重整装置进料/产物换热器泄漏的方法及原理,并在某工业装置上加以运用的情况.其中芳烃含量法是根据产物分离罐底物料和重整汽油芳烃含量变化来判断;转化率比较法是根据特定环烷烃的转化率来判断;示踪剂法是在原料中注入苯酚,再根据产物分离罐底物料中是否存在苯酚来判断.     

FCC汽油光催化氧化脱硫的实验室研究

采用光催化氧化与液液萃取同时进行的方法，考察了光敏剂十六烷基三甲基溴化铵的用量、pH值、双氧水体积分数和反应时间对脱硫效果的影响。结果表明，在光源为主波长365nm的300W中压汞灯，双氧水体积分数为25％，FCC汽油与双氧水体积比为1：3，总体积为120mL，加入0．20g十六烷基三甲基溴化铵，以7000r／min高速均质5min，pH值为4，光照10h的实验条件下，FCC汽油脱硫率可达91．20％；脱硫后的双氧水及光敏剂可以重复使用，不会造成二次污染。     

FCC汽油叠合生产柴油的研究——(Ⅰ)叠合催化剂的研制

采用中孔γ-Al2O3为载体，以非贵金属Ni为活性金属组分，以金属Sn为助剂组分，制备了FCC汽油叠合生产柴油的催化剂。在实验室小型连续流动式固定床装置上，以FCC汽油为原料，考察了主活性金属负载量、助催化剂、催化剂制备条件对催化剂性能的影响。研究结果表明，在活性金属Ni质量分数为8％，助催化剂Sn质量分数为1％，浸渍时间6h，焙烧温度500℃，焙烧时间4h的条件下，制备的叠合催化剂的催化性能最好。并对催化剂进行了1500h的稳定性试验和再生性能考察，结果表明该叠合催化剂具有良好的稳定性和再生性能。     

岩石物理性质研究技术

主要介绍了2003年EAGE岩石物性测试分析技术取得的新进展。从本届年会看，岩石物理内容主要涉及岩石物理模型建立、时延地震岩石物理与岩石各向异性分析、喷射频率和流体饱和度及其分布预测、岩石物理模拟等新方法、新技术、新成果。在充分考虑岩石物理受当地地质因素影响后，提出岩石物理模版概念，目的是为地质专家方便对岩性和流体的解释提供一种工具。     

Lead-free piezoelectric ceramics with composition of (0.97−x)Na1/2Bi1/2TiO3-0.03NaNbO3-xBaTiO3

Compositions in (Na_1/2Bi_1/2)TiO₃ based ternary system, (0.97 – x) (Na_1/2Bi_1/2)TiO₃-0.03NaNbO₃-xBaTiO₃ (x = 0, 0.01, 0.02, 0.04, 0.05, 0.06, 0.08) are synthesized using conventional solid state reaction method. Influence of BaTiO₃ on crystal structure, dielectric and piezoelectric properties are investigated. All compositions can form single perovskite phase. Powder x-ray diffraction patterns can be indexed assuming a pseudo-cubic structure. Lattice constant increases with the increase of BaTiO₃ concentration. Rhombohedral distortion is observed in poled samples with BaTiO₃ concentration up to 6 mol%. Temperature dependence of dielectric constant and dissipation factor measurement reveals that all compositions experience two phase transitions: from ferroelectric to antiferroelectric and from antiferroelectric to paraelectric. Both transition temperatures, T _c and T _f, are lowered due to introduction of BaTiO₃. Ferroelectric to antiferroelectric phase transition has relaxor characteristics. Piezoelectric properties have relatively higher value around 1 mol% to 4 mol% BaTiO₃. In ceramics with x = 0.02, thickness electromechanical coupling factor (k _t) of 0.51 and piezoelectric charge constant (d ₃₃) of 110 × 10^–12 C/N are obtained. Addition of small amount of BaTiO₃ (x = 0.01, 0.02) improves piezoelectric properties compared to NBT-NN binary system, while T _f remains above 140°C, higher than that of NBT-BT binary system composition with similar piezoelectric properties. This is in favor of the possible application of them as lead-free piezoelectric ceramics.     

A regenerable Fe/AC desulfurizer for SO2 adsorption at low temperatures

A novel regenerable Fe/activated coke (AC) desulfurizer prepared by impregnation of Fe(NO₃)₃ on an activated coke was investigated. Experiment results showed that at 200 °C the SO₂ adsorption capacity of the Fe/AC was higher than that of AC or Fe₂O₃. Temperature-programmed desorption (TPD) revealed that H₂SO₄ and Fe₂(SO₄)₃ were generated on the desulfurizer upon adsorption of SO₂. Effect of desulfurization temperature was also investigated which revealed that with increasing temperature from 150 to 250 °C, the SO₂ removal ability gradually increases. The used Fe/AC can be regenerated by NH₃ at 350 °C to directly form solid ammonium-sulfate salts.     

求解二维结构-声耦合问题的一种直接方法

本文基于传递矩阵法(TMM)和虚拟边界元法(VBEM)，提出了一种求解在谐激励作用下二维结构-声耦合问题的直接法。文中对任意形状的二维弹性环建立了一阶非齐次运动微分方程组，便于用齐次扩容精细积分法求解，对于含有任意形状孔穴的无穷域流体介质的Helmholtz外问题，采用复数形式的Burton-Miller型组合层势法建立了虚拟边界元方程，保证了声压在全波数域内存在唯一解。根据叠加原理并结合最小二乘法，提出了一种耦合方程的直接解法，由于该方法不存在迭代过程，因而具有较高的计算精度和效率。文中给出了二个典型弹性环在集中谐激励力作用下声辐射算例，计算结果表明本文方法较通常采用的混合FE／BE法更为有效。