The relationship between preparation convergence and retention of extracoronal retainers

PURPOSE: Although traditional ideal convergence (the sum of taper of the opposite sides) for crown preparation has been arbitrarily set at 4 degrees to 10 degrees, some believe absolute parallelism yields the highest retention. This study examined the relationship between the degree of convergence of a machined metal die and the retention of its casting. MATERIALS AND METHODS: The method used was that of cementing cast metal crowns onto full crown preparations on brass dies with varying convergence angles, and then recording the force required to remove the crowns from the dies in a vertical direction using a Tate-Emery Testing Machine and Load Indicator. RESULTS: It was found that retention (i.e., the force needed to remove the cemented castings from the die in their common long axis) increases from 0 degree convergence to peak between 6 degrees to 12 degrees convergence. It also seems that a critical film thickness does exist for optimum retention, and that film thicknesses smaller than the critical thickness may be responsible for the phenomenon that we have observed and directly related to the convergence angle itself. CONCLUSIONS: There seems to be experimental data supporting the use of traditionally taught convergence. Our study found that convergence angles between 6 degrees and 12 degrees seem to be optimum for tooth crown preparation when one plans to use zinc phosphate cement. Convergence angles of less than 6 degrees may not be desirable even if they can be clinically achieved. The results of our study indicate that a relationship exists between the convergence angle and the critical cement thickness that is necessary to realize the maximum strength properties of zinc phosphate cement.     

ATM-based transport architecture for multiservices wirelesspersonal communication networks

This paper presents an ATM-based transport architecture for next-generation multiservices personal communication networks (PCN). Such “multimedia capable” integrated services wireless networks are motivated by an anticipated demand for wireless extensions to future broadband networks. An ATM compatible wireless network concept capable of supporting a mix of broadband ISDN services including constant bit-rate (CBR), variable bit-rate (VBR), and packet data transport is explored from an architectural viewpoint. The proposed system uses a hierarchical ATM switching network for interconnection of PCN microcells, each of which is serviced by high-speed, shared-access radio links based on ATM-compatible cell, relay principles. Design issues related to the physical (modulation), media access control (MAC), and data-link layers of the ATM-based radio link are discussed, and preliminary technical approaches are identified in each case. An example multiservice dynamic reservation (MDR) TDMA media access protocol is then considered in further detail, and simulation results are presented for an example voice/data scenario with a proportion of time-critical (i.e., multimedia) packet data. Time-of-expiry (TOE) based queue service disciplines are also investigated as a mechanism for improving the quality-of-service (QoS) in this scenario     

Cognitive treatments for eating disorders.

Cognitive-behavioral therapy (CBT) is applicable to all eating disorders but has been most intensively studied in the treatment of bulimia nervosa (BN). CBT is designed to alter abnormal attitudes about body shape and weight, replace dysfunctional dieting with normal eating habits, and develop coping skills for resisting binge eating and purging. CBT is effective in reducing all core features of BN and shows good maintenance of therapeutic improvement. Although superior to therapy with antidepressant drugs, CBT has not been shown to be consistently superior to alternative psychological treatments. Different hypotheses about CBT's mechanisms of action are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Energy dissipation via radiative recombination and vibronic relaxation in σ-delocalized silicon backbone network polymers

The nature of ultrafast energy dissipation in poly(n-hexylsilyne), a prototypical σ-delocalized alkysilicon network polymer, is explored. This disordered silicon backbone material exhibits strong near-UV to visible band-edge absorption and a high quantum yield of visible emission. The time evolution of the emission band is studied over four decades of time using time-resolved luminescence as a probe. The data indicate that while there is an ‘intrinsic’ Stokes shift after photoexcitation due to kinetic energy relaxation (<10ps), thermalization within a dense band of vibronic states via intramolecular phonon-assisted hopping on a nanosecond timescale is the dominant mechanism for excited-state decay. The data can be understood in terms of theoretical predictions for energy relaxation in disordered materials.     

Survey of animal livers for vitamin A content.

Retail samples of livers from calf (23), ox (18), lamb (17), pig (15), chicken (16) and turkey (1) were analysed to determine levels of vitamin A (all trans-retinol) and to aid assessment of the effects of using vitamin supplemented compound feedingstuffs for livestock. For comparison, 22 liver samples from lambs reared on diets not containing vitamin-supplemented compound feedingstuffs and four samples of liver from ox which had received supplemented feed but not during the last four months prior to slaughter were also analysed. The chosen method of analysis utilized saponification, solvent extraction and normal-phase high performance liquid chromatography with fluorescence detection. For all species analysed, the levels of vitamin A ranged from 10 to 1100 mg/kg, with all but seven at or below 400 mg/kg. For lamb and ox livers, the mean levels were 310 mg/kg and 200 mg/kg respectively for retail samples. The mean levels were 220 mg/kg (lamb) and 120 mg/kg (ox) in liver samples from animals fed controlled diets. The results are of the same order as those reported over recent years.     

Microbiological results from milk samples obtained premilking and postmilking for the diagnosis of bovine intramammary infections.

Bacteriological culture results were compared between 336 pairs of quarter milk samples collected premilking and postmilking. Using a positive result on either premilking or postmilking samples as the definitive diagnosis, premilking sampling sensitivity was 91% for Staphylococcus aureus, 91% for coagulase-negative staphylococci, and 97% for Streptococcus other than agalactiae. Postmilking sampling sensitivities were 81, 45, and 58%, respectively, for the same pathogens. Requiring both premilking and postmilking samples for the definitive diagnosis, specificities were 92, 86, and 95% for premilking sampling alone and 96, 98, and 99% for postmilking sampling alone. Such differences in specificity would result in major differences in predictive value of a positive culture for herds with a low prevalence. Multiple isolates were significantly more common from premilking samples.     

Spectral predictions for pulse interval and width modulation

An expression for the frequency spectrum of pulse interval and width modulation (PIWM) is presented. Experimental results obtained have shown close agreement with spectral predictions from the formula. Performance figures are also included from a practical PIWM optical-fibre transmission system intended for use with TV and video signals.<>     

Phenomena-based thermal-hydraulic modeling requirements for systems analysis of a Modular High Temperature Gas-Cooled Reactor

The Modular High Temperature Gas-Cooled Reactor (MHTGR) is a candidate design for new production and commercial power nuclear reactors. The MHTGR has inherent safety features including: (1) passive shutdown and decay heat removal, (2) reduced requirements for operator intervention, thereby reducing sensitivity to operator error, and (3) long time intervals for corrective action. In support of the Department of Energy's (DOE) initial development of the design, the authors have completed an evaluation of the thermal-hydraulic phenomena that will dominate the plant response during representative normal, off-normal and accident conditions. Phenomena having significance to the plant behavior have been identified, and ranked with respect to their relative importance in satisfying operational, investment and/or safety criteria. The resulting information provides the basis for evaluating the applicability of existing computer codes, and defines the requirements for the development of new codes, for thermal-hydraulic systems analysis. The phenomena-based requirements also support the quality assurance related verification and validation of these codes. This paper briefly describes the methodology employed, and gives illustrative examples of the resulting requirements. References are cited for reports that document the full body of requirements and provide additional information for the methodology.