CO2 savings of ground source heat pump systems – A regional analysis

In the current study the savings of CO₂ emissions due to the use of ground source heat pump (GSHP) systems was investigated in comparison to conventional heating systems. Based on a subsidy program for GSHP systems in southwest Germany, the regional, average, and total CO₂ savings of 1105 installed GSHP systems were determined on a regional scale. The emitted CO₂ per kWh of heating demand for the studied scenario resulted in 149 g CO₂/kWh for GSHP using the German electricity mix and 65 g CO₂/kWh using the regional electricity mix, which results in CO₂ savings of 35% or 72%, respectively. Similar CO₂ avoidances of GSHP systems were found in American and European studies ranging between 15% and 77% strongly depending on the supplied energy for the heat pumps and the efficiency of installation. The resulting CO₂ savings for one installed GSHP unit in the present study therefore range between 1800 and 4000 kg per year. Nevertheless, the minimum average total annual CO₂ savings of all installed GSHP systems due to the subsidy program amounted to 2000 tons per year. The maximum regional avoided additional CO₂ emissions are primarily associated with the affluent suburbs of the most densely populated area in the region. In 2006 the total contribution of CO₂ savings due to GSHP systems in Germany was only about 3.4% of the total renewable energies. However, continuously rising numbers of installed GSHP units and the increasing use of renewable electricity demonstrate that there is a fine opportunity to substantially avoid additional CO₂ emissions associated with the provision of heating (and cooling) of buildings and other facilities.     

Combining electrodermal responses and cardiovascular measures for probing adaptive automation during simulated flight

Adaptive automation increases the operator's workload in case of hypovigilance and takes over more responsibility if workload becomes too high. Two consecutive studies were conducted to construct a biocybernetic adaptive system for a professional flight simulator, based on autonomic measures. Workload was varied through different stages of turbulences. In a first study with 18 participants, electrodermal responses of experimental subjects oscillated very close to the individual set point, demonstrating that workload level was adjusted as a result of adaptive control, which was not the case in yoked control subjects without adaptive automation. Combining electrodermal responses with heart rate variability in a second study with 48 participants further enhanced the adaptive power which was seen in even smaller set point deviations for the experimental compared to the yoked control group. We conclude that the level of arousal can be adjusted to avoid hypovigilance by combining autonomic measures in a closed loop.     

The effectiveness of producer‐side machine‐independent optimizations for mobile code

Portable mobile code is often executed by a host virtual machine using just‐in‐time compilation. In this context, the compilation time in the host virtual machine is critical. This compilation time can be reduced if optimizations are performed ahead‐of‐time before distribution of the mobile code. Unfortunately, the portable nature of mobile code limits ahead‐of‐time optimizations to those that are machine‐independent. This work examines the effect of machine‐independent optimizations on the performance of mobile code applications. All experiments use the SafeTSA Format, a mobile code format that is based on Static Single Assignment Form (SSA Form). The experiments, which are performed on both the PowerPC and IA32 architectures, indicate that the effects of performing classical machine‐independent optimizations are—in fact—quite machine‐dependent. Nevertheless, the results demonstrate that applying such optimizations in a mobile code system can be beneficial. Copyright © 2009 John Wiley & Sons, Ltd.     

Quasi-lumped suspended stripline filters and diplexers

This paper demonstrates a general concept and different types of filters and a diplexer realized in suspended stripline using quasi-lumped elements. Very small low-pass, bandpass, and high-pass filters with typically low loss are designed, fabricated, and tested; even transmission zeroes can easily be included into the design by additional coupling structures. Finally, a low-pass and high-pass filter are combined to form a diplexer of very small size.     

Conductive radical anion salts of poly(butadiene-b-4-vinylpyridine) blockcopolymers

Summary Poly (1,4-butadiene-b-4-vinylpyridine) blockcopolymers are made conductive by formation of the complex salt of the 4-VP-block with tetracyanoquinodimethane (TCNQ). Microphase separated morphologies are obtained where the conductive 4-VP phase is continous or forms a network on a submicron scale in a continous elastomer phase. While the absolute value of the conductivity of 10^-3–10^-4 Scm^-1 depends on the morphology the activation energy typical for an electron hopping process is approximately the same as in the low molecular weight complex with ethylpyridine.     

Chemical Solution Deposition of Columnar-Grained Metallic Lanthanum Nitrate Thin Films

Columnar and (100)-oriented LaNiO₃ thin films were prepared on silicon substrates by a chemical solution deposition (CSD) process using a 0.05 M solution. By reducing the individual layer thickness to 10 nm, columnar LaNiO₃ films with a lateral grain size of ∼120 nm were obtained. The success of this approach required restricting the individual layer thickness to a value below the grain size observed for equiaxed films. This change in microstructure resulted in an improvement in conductivity. The columnar LaNiO₃ film with a thickness of 300 nm showed a resistivity of 4.5 × 10⁻⁵Ω·cm, which is lower by one order of magnitude than that of fine-grain equiaxed films that typically result from CSD methods.