Clinical Significance of Tumor Infiltrating Lymphocytes in Association with Hormone Receptor Expression Patterns in Epithelial Ovarian Cancer

Hormone receptor expression patterns often correlate with infiltration of specific lymphocytes in tumors. Specifically, the presence of specific tumor-infiltrating lymphocytes (TILs) with particular hormone receptor expression is reportedly associated with breast cancer, however, this has not been revealed in epithelial ovarian cancer (EOC). Therefore, we investigated the association between hormone receptor expression and TILs in EOC. Here we found that ERα, AR, and GR expression increased in EOC, while PR was significantly reduced and ERβ expression showed a reduced trend compared to normal epithelium. Cluster analysis indicated poor disease-free survival (DFS) in AR+/GR+/PR+ subgroup (triple dominant group); while the Cox proportional-hazards model highlighted the triple dominant group as an independent prognostic factor for DFS. In addition, significant upregulation of FoxP3+ TILs, PD-1, and PD-L1 was observed in the triple dominant group compared to other groups. NanoString analyses further suggested that tumor necrosis factor (TNF) and/or NF-κB signaling pathways were activated with significant upregulation of RELA, MAP3K5, TNFAIP3, BCL2L1, RIPK1, TRAF2, PARP1, and AKT1 in the triple dominant EOC group. The triple dominant subgroup correlates with poor prognosis in EOC. Moreover, the TNF and/or NF-κB signaling pathways may be responsible for hormone-mediated inhibition of the immune microenvironment.     

A study of the corrosion properties of plasma nitrocarburized and oxidized AISI 1020 steels

Plasma nitrocarburized AISI 1020 steels were oxidized for 15, 30 and 60 min to evaluate their corrosion and microstructural properties. After plasma nitrocarburizing for 3 h at 570°C in a gas mixture comprising 85 vol.% N₂, 12vol.% H₂ and 3 vol.% CH₄, the compound layer composed of ɛ-Fe_2–3(N,C) and γ’-Fe₄(N,C) phases and the diffusion layer above the matrix were observed. The top oxide layer, consisting mainly of magnetite (Fe₂O₄) and hematite (Fe₂O₃) phases, forms after post-oxidation treatment at 500°C. However, the oxide layer was severely degraded by spallation as a result of increases in post-oxidizing time. The difference in corrosion resistance should be attributed to the thickness of the top oxide layer, which was governed by post-oxidizing time.     

Novel blue‐light‐emitting polymers based on a diphenylanthracene moiety

New luminescent copolyethers with diphenylanthracene‐emitting segments and electron‐transporting benzoxazole phenyl were successfully synthesized by aromatic nucleophilic substitution. The polymers, characterized by NMR and IR spectroscopy, were obtained in high yields, showed good solubility in various organic solvents, and had high thermal stability with high glass‐transition temperatures (125–129). The number‐average molecular weights of the polymers were 10,000–20,000, and they had polydispersity indices of 1.2–1.4. The optical and electrochemical properties of the polymers were also investigated. The pure blue emission for the polymers (maximum wavelength = 430–440 nm) was obtained with high photoluminescence quantum efficiency (76–78%) in a chloroform solution. The blue electroluminescence for the poly(TDPB) (maximum wavelength = 440 nm) was obtained with a turn‐on voltage of 15–20 V when simple light‐emitting diodes (indium tin oxide/polymer/Al) were fabricated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2151–2157, 2006     

Process optimization of sweet potato pulp‐based biodegradable plastics using response surface methodology

Biodegradable plastics were produced from sweet potato pulp (SPP) and cationic starch (CS) or chitosan composite (CC) by compression molding and their mechanical properties were tested. A universal testing machine, Rockwell hardness tester, and Izod impact tester were used for testing the mechanical properties (flexural strength, Rockwell hardness, and Izod strength) of the plastics. A central composite second‐order design was used to study the effects of temperature, time, and moisture content on the flexural strength, Rockwell hardness, and Izod strength of SPP/CS and SPP/CC blended plastics. The flexural strength, Rockwell hardness, and Izod strength of SPP‐based plastics was 101.1–305.9 kg/cm², R29.0–R96.7, and 0.6–3.0 kg cm cm^?2, respectively. Regression analysis predicted the optimal mechanical properties (flexural strength, Rockwell hardness, and Izod strength) to be attained with a 150–160°C temperature, 15–20‐min reaction time, and 20–23% moisture content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 423–434, 2002     

Control of NO x emissions from diesel engine by selective catalytic reduction (SCR) with urea

Topics in Catalysis - Among the catalysts screened, Cu-ion exchanged ZSM5 zeolite exhibited the highest NO removal activity, particularly at low reaction temperatures below 200 °C,...     

Preparation and characterization of rubber‐toughened poly(trimethylene terephthalate)/organoclay nanocomposite

Rubber‐toughened poly(trimethylene terephthalate) (PTT)–organoclay nanocomposite (RTPTTCN) was prepared by a melt mixing technique. The rubber‐toughened PTT (RTPTT) was made by blending it with ethylene propylene diene terpolymer (EPDM) and with a small amount of maleated EPDM as a compatibilizer. XRD and TEM analysis indicated that the RTPTTCN forms a partially exfoliated nanocomposite. It was observed from SEM analysis that the clay nanoparticles induced a reduction of rubber particle size in the PTT matrix. Tensile and dynamic mechanical analysis indicated that the clay nanoparticles enhance the stiffness of the RTPTT without adversely affecting its toughness. Melt rheological studies revealed that the nanocomposites exhibited strong shear thinning behavior, and a percolated network of the clay particles was formed. It was also observed from DSC that the clay nanoparticles caused an increase in the nonisothermal crystallization temperature of the PTT. POLYM. ENG. SCI., 47:863–870, 2007. © 2007 Society of Plastics Engineers     

Crystallization and dissolution behavior of l(+) calcium and zinc lactate in ethanol-water solvent

Crystallization and dissolution behavior of L(+) calcium and zinc lactate in 50% ethanol-water solution was studied. The effects of stirring, standing, ultrasonic wave, and temperature on the crystallization of L(+) calcium and zinc lactate were evaluated. It was found that standing had a positive effect on crystallization of L(+) calcium and zinc lactate, while stirring promoted dissolution of crystallized particles and resulted in high residual concentration in mother liquor. The application of ultrasonic wave did not influence much on crystallization process. L(+) calcium and zinc lactate crystallized easily at 5 ‡C; however, complete crystallization took more than 72 hours. These two salts dissolved rapidly and reached equilibrium within 1 hour.     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Shear creep resistance of styrene–isoprene–styrene (SIS)‐based hot‐melt pressure‐sensitive adhesives

The effects of the properties of substrates and tackifier on the shear creep of SIS‐based HMPSAs were investigated. The holding power (t_b) and shear adhesion failure temperature (SAFT) were measured. The relationship between the complex viscosity and the holding power was examined. The holding power and SAFT values of the triblock SIS blends were higher than those of the diblock‐containing SIS blends, perhaps because blends using triblock SIS have higher crossover temperature and complex viscosity than those using diblock‐containing SIS. Higher levels of aromatic resin‐modified aliphatic tackifier and rosin ester were found to decrease the holding power of the HMPSAs. This maybe due to the fact that rosin ester and aromatic‐modified aliphatic resin are compatible with both the ends and midblocks of SIS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 825–831, 2006