Determination of material parameters from regions close to the collector using electron beam-induced current

The conventional method of extracting the minority carrier diffusion length using the electron beam-induced current (EBIC) technique requires that the electron beam be placed at region more than two diffusion lengths away from the collector. The EBIC signals obtained under this condition usually has low signal to noise ratio. In addition, the true diffusion length of the sample is initially unknown and hence it is difficult to estimate how close the beam can be placed from the collector. To overcome all these difficulties, a new method of extracting minority carrier diffusion length from the EBIC signal is proposed. It is shown that this method can be applied to EBIC signals obtained from regions close to the collector. It is also shown that the surface recombination velocity of the sample can also be obtained using this method. This theory is verified using EBIC data generated from a device simulation software.     

谈中国特色的信息化道路

论述了我国在信息化道路上要正确处理如信息技术与信息资源等的四个关系，同时强调推进信息化要关注中国国情的9个特点。     

半空间饱和土中瑞利波特性

通过对饱和土中波的运动方程及连续方程分析，推导了饱和土中瑞利波特征方程，讨论了半空间饱和土中瑞利波波速度的弥散特性，以及位移和孔压分布情况。     

智能同步广播激励器及其标频

使用智能同步广播激励器,并采用CCTV传输的1MHz标频信号,就有可能实现自适应相位跟踪同步广播。这将大大节省中波段的频率资源。     

混凝土面板堆石坝坝料开采爆破试验

介绍在某水电站进行的混凝土面板堆石坝坝料开采爆破试验的情况。试验突破了仅根据岩石坚固性系数选取单位炸药消耗量的传统习惯，结合岩体裂隙与风化程度确定单位炸药消耗量，并采取分段装药，严格控制各段装药量和炮孔堵塞长度等措施，取得了良好的爆破效果。     

钕玻璃激光放大器反转粒子数的荧光测定法

本文报道了通过测量钕玻璃激光放大器在一定泵浦功率下的荧光波形的方法,获得放大器中反转粒子数密度随时间的变化关系,进而得到反转粒子数密度达到最大值的时刻的测定方法及实验结果。     

周宁水电站碾压混凝土大坝施工

周宁大坝RCC自2003年4月7日开浇,至2004年4月28日结束,共浇筑161500m3,总体质量良好,施工中充分地借鉴了棉花滩等工程大坝施工技术成果,在斜层碾压工艺上有一定特色。本工程RCC的主要施工技术可供参考。质量检测成果满足设计要求。     

Optimal Conditions for Preparing Ultra-Fine CeO2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor (SCISR) from Ce(NO3)3·6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide (CeO2) powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce(NO3)3 and NH4HCO3 solutions were 0.25 and 0.3 mol·L-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g·L-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r·min-1, 80 ℃, 20 min, 5～6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8～2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point group was O5H-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor (STR).     

江西长力转炉开发60Si2Mn弹簧钢工艺研制

介绍了江西长力转炉研发60Si2Mn弹簧扁钢的过程,以及60Si2Mn弹簧钢的转炉生产工艺及研制结果.     

EDGE技术的测试和研究

对EDGE技术进行了介绍，并对EDGE技术的现网测试进行了说明，对于EDGE技术的功能特点及现网应用的模型、性能指标进行了研究和探讨。