The microstructure of highly-oriented graphite tape prepared from mesophase pitch by melt-blowing

A highly-oriented continuous carbon/graphite tape was prepared from a coal tar-based mesophase pitch by melt-blowing using a slit type nozzle. The average thickness and width of tape were ca. 20 μm and 7.2 mm, respectively. The molten precursor pitch was continuously extruded through the slit nozzle to produce a pitch tape along the drawing direction. The tape was oxidized, carbonized and graphitized. The micro area X-ray diffraction revealed that the carbon layer planes were oriented parallel to the tape surface indicating a strong anisotropy. The orientation was greater in the tape drawing direction than in the tape width direction, and also in the center area than in the edge area. The mechanical properties were higher than those of conducting polymers, but lower than those of carbon fiber with lower elastic modulus grade.     

Eleven phthalate esters and di(2-ethylhexyl) adipate in oneweek duplicate diet samples obtained from hospitals and their estimated daily intake

Plasticizers in duplicate diet samples obtained over 1 week were analysed in order to estimate daily intake. The phthalate esters were as follows: diethyl, dipropyl, dibutyl, dipentyl, dihexyl, butylbenzyl, dicyclohexyl, di(2-ethylhexyl), dioctyl, diisooctyl (mixture of isomers) and diisononyl (mixture). Di(2-ethylhexyl) adipate was also determined. Homogenized samples of composite meals were extracted with acetonitrile, lipids were removed by extraction into n-hexane and the acetonitrile layer was cleaned using FlorisilR and R Bondesil PSA dual layer column. Phthalates were determined by GC/MS (SIM). Phthalate recovery from the fortified food mixture by this method was 62.5-140.8%. Quality assurance as assessed by three laboratories indicated coefficient of variance in the levels of detected phthalates in same lot samples as below 10%. Detection limits were 0.1-23ng/g for each phthalate. One-week duplicate diet samples provided by three hospitals in three remote prefectures of Japan were analysed as individual meals. In all 63 samples, DEHP was present at the highest level among all phthalates in the range 10-4400ng/g. The intake of plasticizers estimated from all samples was 519 µ g DEHP/day, 86 µ g DEHA/day, 65 µ g DINP/day, and 4.7 µ g BBP/day. Calculated DEHP in 2-day samples out of 21 days exceeded EU TDI for a person of 50kg body weight (1850 µ g per day). Disposable PVC gloves used during the preparation of meals were suspected as the source of the high DEHP content. One-day intake of the other phthalates and DEHA was below 7% of TDI in all cases. High concentrations of DEHP (5990ng/g) was found in baby food used in quality assurance work. The source of contamination was the PVC-tube used during production and was effectively reduced by replacing the tube by one made of stainless steel.     

Nanosecond and femtosecond mass spectroscopic analysis of a molecular beam produced by the spray-jet technique

The spray-jet molecular beam apparatus enabled us to produce a molecular beam of non-volatile molecules under high vacuum from a sprayed mist of sample solutions. The apparatus has been used in spectroscopic studies and as a means of molecular beam deposition. We analyzed the molecular beam, consisting of non-volatile, solvent, and carrier-gas molecules, by using femtosecond- and nanosecond- laser mass spectroscopy. The information thus obtained provided insight into the molecular beam produced by the spray-jet technique.     

Experimental study of the flow in helical circular pipes: Torsion effect on the flow velocity and turbulence

An objective of the present paper is to experimentally clarify the torsion effect on the flow in helical circular pipes. We have made six helical circular pipes having different pitches and common non-dimensional curvature δ of about 0.1. The torsion parameter β0, which is defined by β0 = τ/（2δ）1/2 with non-dimensional torsion r, are taken to be 0.02, 0.45, 0.69, 1.01, 1.38 and 1.89 covering from small to very large pitch. The velocity distributions and the turbulence of the flow are measured using an X-type hot-wire anemometer in the range of the Reynolds number from 200 to 20000. The results obtained are summarized as follows： The mean secondary flow pattern in a cross section of the pipe changes from an ordinary twin-vortex type as is seen in a curved pipe without torsion （toroidal pipe） to a single vortex type after one of the twin-vortex gradually disappears as β0 increases. The circulation direction of the single vortex is the same as the direction of torsion of the pipe. The mean velocity distribution of the axial flow is similar to that of the toroidal pipe at small β0, but changes its shape as β0 increases, and attains the shape similar to that in a straight circular pipe when ,β0 = 1.89. It is also found that the critical Reynolds number, at which the flow shows a marginal behavior to turbulence, decreases as ,β0 increases for small ,β0, and then increases after taking a minimum at ,β0 ≈ 1.4 as ,β0 increases. The minimum of the critical Reynolds number experimentally obtained is about 400 at ,β0 ≈ 1.4.     

Effects of hydroperoxide in breads on IgE antibody responses

The effect of hydroperoxide in breads on antigen-antibody reaction against IgE was examined. We compared the antigen-antibody reaction against IgE between dough including hydroperoxide and that not including hydroperoxide. Crude proteins extracted from the dough including hydroperoxide showed weak antigen-antibody reaction on allergic tests such as ring precipitin test with human-specific IgE, and the IgE binding activity on ELISA. In contrast, the dough without hydroperoxide showed antigen-antibody reaction. The crude proteins extracted from the dough with hydroperoxide or without hydroperoxide were applied by affinity chromatography of trypsin-immobilized chitin. Then proteins having affinity were recovered. The recovered proteins were separated by SDS-PAGE. Each protein was examined for the IgE binding activity on ELISA. The IgE binding activity of baked bread was studied as well. Crude proteins of baked bread made from dough including hydroperoxide showed weaker IgE binding activity on ELISA than proteins of baked bread made from dough without hydroperoxide. Those results suggested that addition of hydroperoxide into dough affects on antigen activation.     

Studies on the contents of water-soluble chlorides and water-soluble sulfates in food color aluminum lakes

Japan's Specifications and Standards for Food Additives, 7th Edition (JSFA-VII) does not set limits for total contents of water-soluble chlorides and water-soluble sulfates (water-soluble inorganic salts) in food color aluminum lakes (FC-Als). However, the regulatory limit is 2% in JECFA and CFR. We used column switching suppressor-type ion chromatography (CSS-IC) for determination of anions. The total contents of water-soluble inorganic salts in FC-Als (112 qualified samples) were determined using the modified CSS-IC from fiscal year 1998 to fiscal year 2003. Total contents of water-soluble inorganic salts in four samples exceeded 2%. From an international point of view, it is desirable that the total content of water-soluble inorganic salts in FC-Al should again be regulated in Japan.     

Estimation of daily intake of phenols in hospital meal samples

Daily intakes of 12 phenols which are possible endocrine disruptors were estimated in hospital meals from 2000 to 2001. 4-Nonylphenol (4-NP (mix)) and bisphenol A (BPA) were detected at levels of 5.0 to 19.4 ng/g and 0.2 to 1.1 ng/g, respectively. 4-tert-Butylphenol, 4-n-pentylphenol, 4 -tert-pentylphenol, 4-n-hexylphenol, 4-n-heptylphenol and 4-tert-octylphenol were detected at levels of 0.1 to 2.4 microg/g. The daily intakes of 4-NP (mix) and BPA were 5.8 microg/day and 0.42 microg/day, respectively. The daily intakes of other phenols were less than 1 microg/day.     

Hydrogen entry into Fe and high strength steels under simulated atmospheric corrosion

Electrochemical hydrogen permeation tests of Fe sheets under two cyclic corrosion test (CCT) conditions were performed to understand hydrogen entry behavior under atmospheric corrosions. Hydrogen entry into 1300 MPa-class high strength steels under two CCT conditions was also investigated using thermal desorption analysis. One CCT consisted of salt spray, dry and wet stages (Salt Spray CCT; SSCCT), and the other consisted of dry and wet stages after NaCl deposition (Dry–Wet CCT; DWCCT). The corrosion rates of Fe and the steels were almost constant under SSCCT and they decreased under DWCCT with time. Nevertheless, both CCTs resulted in increases in hydrogen permeation current and diffusible hydrogen content with time indicating enhancement of hydrogen entry. Corrosion current monitored by means of an atmospheric corrosion monitoring sensor consisting of Fe anode and Ag cathode decreased obviously under dry stage of the CCTs, whereas hydrogen permeation was high at the beginning of the dry stage. The discrepancy between hydrogen entry and corrosion rate indicates that the hydrogen entry is not directly controlled by corrosion rate. Increase in acidity of underlying rust layer with growth of rust layer monitored using a W/WO₃ electrode is considered to be one of the factors affecting the hydrogen entry efficiency.     

An integrated numerical simulator for thermal performance assessments of firefighters’ protective clothing

Research and development of firefighters’ protective clothing relies on a large number of fire disaster experiments in order to assess the thermal performance. It would be substantially advantageous to substitute a virtual numerical experiment for a real one in terms of time, cost and safety. The present article reports the development of an integrated numerical simulator that makes possible the estimation of burn injuries originating from fire disasters. In the simulator, a general-purpose computational fluid dynamics program computes the fluid flow and heat transfer in an in situ fire event, while a one-dimensional program calculates the radiative–conductive heat transfer through the clothing and human skin. A data interface combines the two simulations by loose coupling so as to give the real-time burn injury progress output. The predicted surface heat fluxes and burn degrees agree with experimental measurements reasonably well. Possible numerical error sources are discussed that call for potential improvements in the future.