Jordan type inequalities involving the Bessel and modified Bessel functions

In this work, two general forms of Jordan’s inequalities for the Bessel and modified Bessel functions are established, and proved by using l’Hospital’s rule for monotonicity and some properties of the spherical Bessel and the modified spherical Bessel functions of the first kind. The applications of the results above give two new infinite series for the Bessel and modified Bessel functions.     

Dynamically modulated intensity interrogation scheme using waveguide coupled surface plasmon resonance sensors

An electro-optically modulated intensity interrogation method based on tunable waveguide coupled surface plasmon resonance sensors has been proposed. It has been theoretically and experimentally demonstrated that the proposed scheme can enable sensitive measurement of measurand variations. By modulating the refractive index in the waveguide layer, this interrogation method yields modulated signal whose amplitude is related to measurand's refractive index. This amplitude modulated signal offers a higher signal to noise ratio and eliminates additive noise in the sensor system. A preliminary investigation using saline buffers with different NaCl concentrations shows a resolution of 2.3 × 10^?6 refractive index unit by our approach. Resolution can be controlled by the amplitude of the applied modulation voltage and can be further enhanced by optimizing the device structure or improving the electro-optical (E-O) coefficient of the E-O material. This approach is simple, stable, and promising for low-cost or multi-channel SPR biosensor applications.     

Interactive surgery simulation for the nose augmentation using CT data

Surgery to reshape the nose with an implant has been a regular procedure for enhancing a patient’s appearance and self-confidence. The purpose of this study was to establish a computed tomography (CT) based three-dimensional assistant plastic surgery systems, which can provide the patients with realistic prediction of their own postoperative appearance in computer and specifically produce a nose implant for an individual patient. Preoperative CT data and 3D reconstruction techniques were employed to generate 3D model of the patient’s skull. 3D collision detection and finite elements model deformation were then applied to simulate nose augmentation surgery and predict postoperative appearance. According to the patient’s expectation, digital models of the nose implants were constantly modified. When the patient is satisfied with the simulated results, custom made silicone implants were produced by a computer controlled device. Accurately regeneration of 3D images and realistic operative simulations could be achieved with this system. The implants produced exactly conformed to the results of simulation. No curving and reshaping were needed during operating. The clinical results extremely matched with the simulations. The system enhances surgeon patient communication and facilitates preoperative planning. It is especially desirable for implant surgery with less guesswork of size, contour, and orientation of the implant. The best chance of optimal results could be achieved.     

Feedback-free rate-allocation scheme for transform domain Wyner–Ziv video coding

In most existing Wyner–Ziv video coding schemes, a feedback channel (FC) is expected at the decoder in order to allocate a proper bit rate for each Wyner–Ziv frame. However, FC not only results in additional latency but also increases decoding complexity due to the several feedback-decoding iterations. Moreover, FC may be unavailable in many practical video applications. In this paper, we propose a novel feedback-free rate-allocation scheme for transform domain Wyner–Ziv video coding (TD-WZVC), which predicts the rate for each Wyner–Ziv frame at the encoder without significantly increasing the complexity of the encoder. First, a correlation estimation model is presented to characterize the relationship between the source frame and the reference frame estimated at the encoder in TD-WZVC. Then, an efficient FC-free rate-allocation algorithm is proposed and a linear model is built to avoid both overestimation and underestimation of the real rate and obtain an optimal rate-distortion performance. Experimental results show that the proposed scheme is able to achieve a good encoder rate allocation while still maintaining consistent coding efficiency.     

Full-order observer-based actuator fault detection and reduced-order observer-based fault reconstruction for a class of uncertain nonlinear systems

This paper considers observer-based actuator fault detection and reconstruction problems for uncertain nonlinear systems. Based on a kind of full-order observer which is robust to disturbances but sensitive to actuator faults, a single detection observer is constructed to produce a residual which can be used to alarm the occurrence of the actuator faults when at least one actuator fault occurs indeed. The full-order observer is adaptive one because an adaptation law which can adjust the Lipschitz constant of Lipschitz term is introduced. For this reason, the Lipschitz constant can be unknown in our design. After this, a kind of reduced-order observer is developed by choosing a special observer gain matrix. Based on the reduced-order observer, we provide a kind of unknown information estimating method which can be used to not only reconstruct the actuator faults but also estimate the disturbances of the system. In simulation, a real model of the seventh-order aircraft is used to illustrate the effectiveness of the proposed methods.     

TLE7810特有的SBC低功耗设计方法

低功耗要求是嵌入式系统设计中普遍提出的要求,对提高系统的可靠性与稳定性有着重要意义。首先分析了单片机功耗的主要来源,然后研究了Infineon TLE7810单片机的低功耗设计方案,最后以电动车窗控制器为例介绍了TLE7810低功耗设计方案的具体应用。     

嵌入式Linux中基于Qt／Embedded的键盘接口设计

采用S3C2440处理器和嵌入式Linux操作系统,选择目前比较常用的Qt／Embedded作为图形界面的开发语言,设计了嵌入式系统中的键盘接口。在介绍硬件平台的基础上,给出了嵌入式Linux下键盘设备驱动程序的工作过程及实现方法,简单介绍了Qt／Embedded的架构和字符输入策略,详细设计了Qt键盘驱动插件和应用程序。实验表明,键盘驱动采用Qt的插件系统,具有更好的独立性和移植性。     

A bandpass filter with adjustable bandwidth and predictable transmission zeros

In this article, a microstrip bandpass filter with an adjustable bandwidth and predictable transmission zeros is proposed. The proposed filter is implemented by combining two hairpin edge‐coupled resonators with interdigital capacitors. Compared to typical edge‐coupled filters, the proposed filter provides a wider bandwidth resulting from a higher coupling strength between its resonators. To further increase the coupling and consequently the bandwidth, a pair of etched slots in the ground plane is used. By adjusting the geometrical parameters of the interdigital capacitors and etched slots, the bandwidth can be easily adjusted. The filter features two transmission zeros, which are determined by means of the semi‐analytical model developed as part of this work. Furthermore, the proposed filters can be cascaded to obtain a sharper cutoff frequency response. Frequency responses of the filters from measurements are in good agreement with those simulated using IE3D in the 5–9 GHz range. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

Skew detection in document images based on rectangular active contour

The digitalization processes of documents produce frequently images with small rotation angles. The skew angles in document images degrade the performance of optical character recognition (OCR) tools. Therefore, skew detection of document images plays an important role in automatic document analysis systems. In this paper, we propose a Rectangular Active Contour Model (RAC Model) for content region detection and skew angle calculation by imposing a rectangular shape constraint on the zero-level set in Chan–Vese Model (C-V Model) according to the rectangular feature of content regions in document images. Our algorithm differs from other skew detection methods in that it does not rely on local image features. Instead, it uses global image features and shape constraint to obtain a strong robustness in detecting skew angles of document images. We experimented on different types of document images. Comparing the results with other skew detection algorithms, our algorithm is more accurate in detecting the skews of the complex document images with different fonts, tables, illustrations, and layouts. We do not need to pre-process the original image, even if it is noisy, and at the same time the rectangular content region of a document image is also detected.     

Comparison of two novel MRAS based strategies for identifying parameters in permanent magnet synchronous motors

Two model reference adaptive system (MRAS) estimators are developed for identifying the parameters of permanent magnet synchronous motors (PMSM) based on the Lyapunov stability theorem and the Popov stability criterion, respectively. The proposed estimators only need online measurement of currents, voltages, and rotor speed to effectively estimate stator resistance, inductance, and rotor flux-linkage simultaneously. The performance of the estimators is compared and verified through simulations and experiments, which show that the two estimators are simple, have good robustness against parameter variation, and are accurate in parameter tracking. However, the estimator based on the Popov stability criterion, which can overcome parameter variation in a practical system, is superior in terms of response speed and convergence speed since there are both proportional and integral units in the estimator, in contrast to only one integral unit in the estimator based on the Lyapunov stability theorem. In addition, the estimator based on the Popov stability criterion does not need the expertise that is required in designing a Lyapunov function.