Effects of Spatial Characteristics on Smart Antenna System with Uniform Linear Antenna Array

1IntroductionCurrently,smart antenna technology can greatly en-hance system performance and i mprove the system ca-pacity so that it has been considered as a keytechnologyinthe third generation wireless communicationsystems .The researches on channel model , beamforming algo-rithms and receive algorithms have been widely carriedout and a great many of proposition have beensubmittedtothe 3th Generation Project Partner (3GPP) . Fromthe viewpoint of link-level and system-level research,many asp…     

渠道混凝土衬砌产生裂缝的原因及处理措施

分析了农田输水渠道混凝土衬砌产生裂缝的主要原因,提出了相应的防止裂缝产生的方法及处理措施.     

Battery-Aware Routing for Streaming Data Transmissions in Wireless Sensor Networks

Recent technological advances have made it possible to support long lifetime and large volume streaming data transmissions in sensor networks. A major challenge is to maximize the lifetime of battery-powered sensors to support such transmissions. Battery, as the power provider of the sensors, therefore emerges as the key factor for achieving high performance in such applications. Recent study in battery technology reveals that the behavior of battery discharging is more complex than we used to think. Battery powered sensors might waste a huge amount of energy if we do not carefully schedule and budget their discharging. In this paper we study the effect of battery behavior on routing for streaming data transmissions in wireless sensor networks. We first give an on-line computable energy model to mathematically model battery discharge behavior. We show that the model can capture and describe battery behavior accurately at low computational complexity and thus is suitable for on-line battery capacity computation. Based on this battery model we then present a battery-aware routing (BAR) protocol to schedule the routing in wireless sensor networks. The routing protocol is sensitive to the battery status of routing nodes and avoids energy loss. We use the battery data from actual sensors to evaluate the performance of our protocol. The results show that the battery-aware protocol proposed in this paper performs well and can save a significant amount of energy compared to existing routing protocols for streaming data transmissions. Network lifetime is also prolonged with maximum data throughput. As far as we know, this is the first work considering battery-awareness with an accurate analytical on-line computable battery model in sensor network routing. We believe the battery model can be used to explore other energy efficient schemes for wireless networks as well.     

关于木糖(醇)生产过程中环保、清洁、节能生产方法的研究

本文从环境保护角度,面对木糖(醇)生产过程中大污染、高能耗,寻找解决办法,实现可持续发展的目标.     

Analysis of S-SEED''s characteristics in optical switch

This article introduces the basic structure of a symmetric self-electrooptic effect device （S-SEED）, and applies the Kirchoff＇ s current law and a purely equivalent capacitive model, to analyze S-SEED＇s switch characteristics. Linear approximation and N-segment approximation are utilized to obtain S-SEED＇s voltage-time （V-T） and characteristics. Theoretical analysis is verified by simulations, and the results demonstrate that the precision of S-SEED＇s switch time can satisfy the requirement in applications with linear approximation. Moreover, the simulations compare S-SEED＇s switch characteristics with different input powers and input contrast ratios, which reveal that increasing input contrast ratio is an effective way to improve S-SEED＇s switch characteristics.     

建筑物下采煤方法设计

论文针对了北掌矿井井田范围建(构)筑物多、压煤严重等特点,在分析比较充填开采和条带式开采等"建下"开采方法的技术上,确定了比较适合该矿的冒落条采法开采技术,指出新建矿井以建筑物下开采为主也可获得较好的经济社会效益。在此基础上,对条采工作面长度,保留煤柱宽度及主要指标进行了设计。     

聚合物基金属梯度复合材料的制备与结构研究

本文通过石墨阴极溶液涂膜法制得甲基丙烯酸-丙烯酸共聚物[P(MMA-co-MAA)]与环氧乙烷(PEO)的共混聚合物,并以其为基质制备了聚合物基铜金属复合膜(CPCFs).在这一过程中,对所得溶胀阴极膜(SCF)进行半干燥处理后,用电化学方法使其还原以得最终产物.实验研究表明:(1)低P(MMA-co-MAA)含量会增强SCF的离子电导率;(2)还原反应中酸性环境会增强电导性;(3)水-乙醇共溶剂有助于增强电导率.偏光显微镜测试显示:poly(MMA-co-MAA)会影响PEO的结晶.X-射线衍射实验也证实了还原铜金属单质的存在.     

基于无线收发数传模块PTR2030的温度测控系统设计

PTR2030是超小型、超低功耗、高速率的无线数传MODEM模块。它性能优异，是目前低功率无线数传应用方面的理想器件。文中介绍了PTR2030的主要特点、引脚功能、软件设计、硬件连接方法及具体应用电路。     

多孔硅发光二极管的载流子传输特性研究

制备AI／多孔硅／c-Si／Al结构的多孔硅发光二极管，利用其I-V特性关系，以及在不同温度下其I-V特性的变化，结合多孔硅的特殊微结构及性质，分析了多孔硅发光二极管中载流子的产生和传输过程；通过比较其发光猝灭前后I-V特性的变化，解释了发光猝灭的原因。提出了如果在低电场下能够实现大量载流子在限制性Si微粒中复合．是提高多孔硅电致发光效率的一个途径。     

ZL101合金锶变质效果及热处理工艺的改进

对现场生产的ZLl01合金铸件材质进行了全面分析，针对存在的产品成分不准，变质效果不好，力学性能不合格的问题，通过改进合金的锶变质工艺和热处理工艺，改善了合金的组织和性能，达到了对材料的成分、性能的各项要求。