金属/聚合物复合材料对中能电子的屏蔽作用研究

运用MULASSIS计算程序模拟计算了不同组成的屏蔽材料对空间辐射环境的屏蔽效果,在此基础上进行屏蔽材料的初步设计,并制备了一系列不同组成的金属/聚合物复合材料,结合中能电子照射的实验结果,讨论了组成对金属/聚合物复合材料的屏蔽效果的影响.研究发现,高原子序数和低原子序数金属混合添加的复合物样品具有较好的屏蔽效果.     

施加复合电磁搅拌对A357合金微观组织的影响

在半固态加工技术中，电磁搅拌是最早应用于制备非枝晶浆料的方法之一，同时也是半固态触变压铸技术最早获得工业应用的重要技术基础之一。采用自行开发的电磁搅拌器，研究了多种不同电磁搅拌方式在不同工艺条件下，单独施加或复合施加对A357合金微观组织的影响。试验结果表明：单一施加旋转感应电磁搅拌时，浆料径向组织很不均匀；单一施加无芯感应电磁搅拌。当搅拌电流较小时，径向组织也不均匀，增大电流，浆料质量有明显改善；采用（旋转感应＋无芯感应）复合电磁场进行复合电磁搅拌时，可在电流较小时获得满意的浆料质量。     

Design of ACO based PID controller for zeta converter using reduced order methodology

DC-DC conversion playing major role in many applications of power electronics and widely used in power circuit. Enormous methodology's of PID based converters are created in recent decades. The zeta converter is basically a DC – DC converter and its control the output voltage from an input voltage step up and step down the output voltage. The main scope of this paper is to design of ACO(Ant colony Optimization)based PID controller for zeta converter using model order technique with minimum of error, the zeta converter is basically fourth order system, design of PID controller for fourth order system is quite complex so model order reduction is used for controller design of zeta Converter, Therefore, the higher order system is reduced to second order using three different reduction techniques, then the ACO based PID controller is designed for reduced order system and is matched with the zeta converter, the results shows that designed controller for zeta converter gives quite good response for both the transfer function and is attached with zeta converter circuit, controller gives good performance indices is made on the basis of ISE, IAE and ITAE with minimum value of errors.     

Design of composite data acquisition gateway based on 5G network

The integrated data collection system hasn't changed much over the years. Their growth is dominated by digital filtering, and they get a new avionics bus. Time division multiplexing is still used to communicate with the system's data collector. These schemes make use of commands and data buses. While this method works, it has many drawbacks. These shortcomings are overwhelming the strict system architecture, system bandwidth limits, and expertise to only obtain an avionics bus, otherwise system bandwidth and one-way flow of data and control. This lead for high-end video recorders. To quietly monitor our actions and valuable information provides important warnings. However, it is usually completed by a device with this small processing power, which tracks the device, stores the data of the user's data, and is limited in processing. Therefore, it is important to store and process user data in the cloud to track 5 G network activity. This article proposes a simple 5G network gateway solution for custom user monitoring equipment. Collects charge data on Network 5G and Charging-aware multi-mode based routing protocol (CMRP). The CMRP routing mechanism is not yet stable, but the changes depend on the state of the energy charge sensor. This cannot be complemented by energy-efficient sensors and routing protocols that consume less energy.     

Application of iot medical image detection and prenatal genetic testing in obstetric clinic

The use of new techniques and methods can be significantly improved during prenatal examination and screening of fetal genetic abnormalities. Expanding the number of vectors in screening and screening for single-cell gene diseases in fetal DNA will increase the probability of success of the whole screening test.Recently, sub chromosomal abnormalities have been introduced into prenatal care. The lack of suitable tools makes it very difficult to obtain information about collection, management, and prenatal genetic testing. The purpose of this study is to improve the accessibility of nutritional information by using the advantages of advanced medical image detection and integrating the IoT (Internet of Things) and prenatal genetic testing platforms in obstetric outpatient clinics. Records are kept that the platform will allow IoT to interact with sensor practitioners and provide immediate access to medical images prior to delivery. This proposed system provides an IoT application for managing obstetric outpatient information and prenatal genetic testing requirements. The requirement for establishment is the realization of the development of an IoT platform for complete medical image detection information management with IoT input required for integration with existing medical information systems. In response, the purpose of the study is to use integrated IoT applications to help nutrition professionals, researchers, patients, and especially mothers, to enhance their collection of medical imaging and prenatal genetic testing IoT sensor based information transfer.     

Distributed patching for mobile wireless sensor networks

Mobile wireless sensor networks (MWSNs), the continuous movement of sensor nodes, may cause complete disconnection of the network or at best a part of it. The design of such networks should guarantee that all sensor nodes at all times have a path to the sink node(s). Prolonging the lifetimes of the MWSNs is a crucial design issue but should not be at the expense of other essential functions such as connectivity. In this paper, we propose an energy efficient distributed framework for connectivity maintenance of MWSNs. In the proposed framework, sensor nodes of the MWSNs schedule and control their radio frequency (RF) modules based on dynamic coordinated reconstruction mechanism, some senor nodes may lose their connectivity with the network due to mobility, depletion of energy and/or incurred faults. Two protocols are developed to patch up the disconnection of the MWSNs. The first protocol reestablishes the network connection consuming far less energy than state-of-the-art alternatives. However, it is capable of reestablishing the connection when no more than 20% of the MWSN backbone nodes lose connection concurrently. The second protocol extends this limit to operate when up to 35% of the MWSN backbone nodes lose connection simultaneously.     

A new parallel algorithm for vertex priorities of data flow acyclic digraphs

Data flow acyclic directed graphs (digraph) are widely used to describe the data dependency of mesh-based scientific computing. The parallel execution of such digraphs can approximately depict the flowchart of parallel computing. During the period of parallel execution, vertex priorities are key performance factors. This paper firstly takes the distributed digraph and its resource-constrained parallel scheduling as the vertex priorities model, and then presents a new parallel algorithm for the solution of vertex priorities using the well-known technique of forward–backward iterations. Especially, in each iteration, a more efficient vertex ranking strategy is proposed. In the case of simple digraphs, both theoretical analysis and benchmarks show that the vertex priorities produced by such an algorithm will make the digraph scheduling time converge non-increasingly with the number of iterations. In other cases of non-simple digraphs, benchmarks also show that the new algorithm is superior to many traditional approaches. Embedding the new algorithm into the heuristic framework for the parallel sweeping solution of neutron transport applications, the new vertex priorities improve the performance by 20 % or so while the number of processors scales up from 32 to 2048.     

一种适用于智能设备的多重操作系统架构

针对智能设备,为避免引入虚拟化技术而产生的性能开销,提出并实现了MuxOS。MuxOS是一种多重操作系统架构,使得智能设备可以在非虚拟化条件下运行多个操作系统。介绍了MuxOS工作原理,描述了MuxOS运行流程。测试结果表明, MuxOS性能优于Xen等虚拟化产品,可以实现操作系统间亚秒级的快速切换。     

基于PLC的港口集装箱码头装卸模型下位机控制系统设计

根据港口集装箱码头装卸作业的实际情况,基于PLC,设计装卸模型所对应的下位机控制系统,并介绍设计过程中的技术要点、注意事项.     

AGING BEHAVIOUR OF PARTICULATE REINFORCED ALUMINUM ALLOY MATRIX COMPOSITES

The process of aging precipitation in SiC_p/6061 and Al_2O_3/6061 composites were investigated. Hardness testing, differential scanning calorimetry(DSC) and transmission electron microscopy were employed. Results showed that the precipitation phase form directly along dislocation lines in the composites because the particles produce high densities of dislocations which makes vacancy densities in the composites decrease, and the main precipitation phase at peak hardness was β′ phase.