Doping-free hybrid white organic light-emitting diodes with fluorescent blue,phosphorescent green and red emission layers

Industrialized white organic light-emitting diodes (OLEDs) currently require host-guest doping, a complicated process necessitating precise control of the guest concentration to get high efficiency and stability. Two doping-free, hybrid white OLEDs with fluorescent blue, and phosphorescent green and red emissive layers (EMLs) are reported in this work. An ultra-thin red phosphorescent EML was situated in a blue-emitting electron transport layer (ETL), while the ultra-thin green phosphorescent EML was placed either in the ETL (Device 1), or the hole transport layer (HTL) (Device 2). Device 2 exhibits higher efficiency and more stable spectrum due to the enhanced utilization of excitons by ultra-thin green EML at the exciton generation zone within the HTL. Values of current efficiency (CE), power efficiency (PE), and CRI obtained for the optimized hybrid white OLEDs fabricated through a doping-free process were of 23.2 cd/A, 20.5 lm/W and 82 at 1000 cd/m², respectively.     

Fully solution-processed and multilayer blue organic light-emitting diodes based on efficient small molecule emissive layer and intergrated interlayer optimization

Efficient and fully solution-processed blue organic light-emitting diodes (OLEDs) based on fluorescent small-molecule and methanol/water soluble conjugated polymer as electron-injection material are reported. The emitting layer is 3,6-bis(9,9,9′,9′-tetrakis (6-(9H-carbazol-9-yl)hexyl)-9H,9′H-[2,2′-bifluoren]-7-yl)dib-nzo[b, d]thiophene 5, 5-dioxide (OCSoC) with a blue-fluorescent small-molecule, and a methanol/water soluble polymer poly[(9,9-bis(30-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl-fluorene)] (PFN) acted as electron-injection layer (EIL). All the organic layers are spin-coated from solution. The multilayer device structure with emitting layer/electron-injection layer is achieved by solution-processed method without the dissolution problem between layers. The performances of the devices show that the maximum luminous efficiency of the multilayer device is increased about 43%, compared to the single-layer device. PFN acting as the EIL material plays a key role in the improvement of the device performance when used in solution-processed small-molecule OLEDs.     

基于显微视觉的宏/微双重驱动微动台的自动标定

提出了基于压电技术的微操作系统的自动标定方法,采用混合式步进电机直接驱动的宏动平台,实现系统大行程宏动定位,安装在宏动平台上的压电陶瓷驱动的微动平台和精密光栅,实现亚微米级的分辨率和定位精度,通过以上两部分实现定位机构的全闭环反馈控制,采用显微视觉反馈获取微动台操作器在图像中的位置信息进行标定。实验结果表明:系统的动态和稳定性能良好,自动标定运算速度快,运行速度达到11 frame/s,实现了对系统的精确标定,标定精度达到0.1μm。     

差分式连续时间电流型CMOS跨导—电容低通滤波器

应用信号流图法对电流系统传递函数直接模拟，提出了一种新颖的差分式连续时间电流模式ＣＭＯＳ跨导－电容低通滤波器的实现方案。由于采用了差分式结构和电流负反馈，整个电路方案具有差分式结构和电流型电路的优点；并且仅使用最少数量的ＯＴＡ和电容，与数字ＣＭＯＳ工艺兼容，适于全集成。面向实际电路完成了ＭＯＳ管级的计算机仿真，结果表明，所提出的电路方案正确有效     

Inference and learning in hybrid probabilistic network

This paper proposed a novel hybrid probabilistic network, which is a good tradeoff between the model complexity and learnability in practice. It relaxes the conditional independence assumptions of Naive Bayes while still permitting efficient inference and learning. Experimental studies on a set of natural domains prove its clear advantages with respect to the generalization ability.     

Fabrication of the supersaturated solid solution of carbon in copper by mechanical alloying

Mechanical alloying of powder mixtures of copper and graphite was performed in a high energy ball mill. The as-milled powder was characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy, respectively. These investigations indicated that high energy ball milling could largely extend the solid solubility of carbon in copper and the 4 wt.% C was dissolved in Cu. It was ascribed to the decrease of the grain size and the increase of the lattice strain. Nanostructures, amorphous carbon and lamellar graphite were observed in the as-milled powder after milling for 24 h.