Irradiation-induced large bubble formation and grain growth in super nano-grained ceramic

In this work, 0.5TRPO•0.5Gd₂Zr₂O₇ ceramic with an average grain size of only ∼15 nm was prepared by a high pressure (5 GPa/520 °C) sintering method. Phase evolutions and microstructure changes of the as-fabricated super nano and micron-grained ceramics under a high-dose displacement damage induced by 300 keV Kr²⁺ ions were investigated. The results show that the super nano-grained ceramic has low degree of amorphization, obvious grain growth (2–3 times in grain size) and big Kr bubbles (10–68 nm) formation after irradiation. The micron-grained ceramic was severely amorphized after irradiation and many microcracks were formed parallel to its surface. The formation mechanism of Kr bubbles in the super nano-grained ceramic is on account of grain boundary diffusion and migration induced by the accumulation of the injecting Kr ions and irradiation defects. Nevertheless, microcracks formed in the micron-grained sample are caused by the accumulation of Kr atoms.     

Remarkably enhanced energy storage properties of lead-free Ba0.53Sr0.47TiO3 thin films capacitors by optimizing bottom electrode thickness

The lead-free Ba_0.53Sr_0.47TiO₃ (BST) thin films buffered with La_0.67Sr_0.33MnO₃ (LSMO) bottom electrode of different thicknesses were fabricated by pulsed laser deposition method on a (001) SrTiO₃ substrate. It was found that the roughness of electrode decreases and substrate stress relaxes gradually with the increase of LSMO thickness, which is beneficial for weakening local high electric field and achieving higher E_b. Therefore, the recoverable energy density (W_rec) of BST films can be greatly improved up to 67.3 %, that is, from 30.6 J/cm³ for the LSMO thickness of 30 nm up to 51.2 J/cm³ for the LSMO thickness of 140 nm after optimizing the LSMO thickness. Furthermore, the thin film capacitor with a 140 nm LSMO bottom electrode shows an outstanding thermal stability from 20 °C to 160 °C and superior fatigue resistance after 10⁸ electrical cycles with only a slightly decrease of W_rec below 1.6 % and 3.7 %, respectively. Our work demonstrates that optimizing bottom electrodes thickness is a promising way for enhancing energy storage properties of thin-film capacitors.     

MPEG-4流媒体技术及其实现方法

详细地介绍了一种基于MPEG-4压缩的嵌入式网络流媒体采集、传输和控制应用系统的设计与实现技术。该嵌入式平台采用203 MHz的ARM920T内核处理器S3C2410B,嵌入式操作系统采用Linux操作系统,用户可在这个系统平台上进行自主软件开发。视频采集模块采用TI公司的TVP5145,视频压缩芯片采用硬压缩W IS GO7007B进行处理,将Y:Cb:Cr格式的视频流转换为MPEG-4编码。     

Time-of-flight secondary ion mass spectrometry as a tool for studying segregation phenomena at nickel–YSZ interfaces

Through a study of Ni–YSZ interfaces it is shown that time-of-flight-secondary ion mass spectrometry (TOF-SIMS) is a powerful and convenient tool for the analysis of ultra thin layers of segregated material at the interfaces and on free surfaces. Two different types of Ni, “pure Ni” (99.995% Ni) and “impure Ni” (99.8% Ni) were investigated. The contact areas on the YSZ and areas outside the contacts were examined with XPS and TOF-SIMS. The impure nickel causes a relatively larger amount of impurities to accumulate at the contact area, e.g. oxides of Mn, Ti, Si and Na. Some impurities migrate to the area outside the contact area. Even though on a larger scale the impurities seem to be homogeneously distributed, detailed analyses in and outside the contact area show the presence of impurity particles, and that the surface species are inhomogeneously distributed amongst the different grains. The extremely low detection limit, the small probe depth, the image capability, and the ease of elemental identification make TOF-SIMS an obvious choice as an analytical tool for studying segregation phenomena at metal–ceramic interfaces such as Ni–YSZ interfaces. XPS, being a quantitative technique, was used as a complementary technique to TOF-SIMS, which is not directly a quantitative technique.     

产品数据管理系统在绿色自行车设计中的应用

介绍自行车产品的研发设计,提出利用产品数据管理系统（PDM）进行绿色自行车产品设计的方案。     

Applications of additive manufacturing (AM) in sustainable energy generation and battle against COVID-19 pandemic: The knowledge evolution of 3D printing

Sustainable and cleaner manufacturing systems have found broad applications in industrial processes, especially aerospace, automotive and power generation. Conventional manufacturing methods are highly unsustainable regarding carbon emissions, energy consumption, material wastage, costly shipment and complex supply management. Besides, during global COVID-19 pandemic, advanced fabrication and management strategies were extremely required to fulfill the shortfall of basic and medical emergency supplies. Three-dimensional printing (3DP) reduces global energy consumption and CO₂ emissions related to industrial manufacturing. Various renewable energy harvesting mechanisms utilizing solar, wind, tidal and human potential have been fabricated through additive manufacturing. 3D printing aided the manufacturing companies in combating the deficiencies of medical healthcare devices for patients and professionals globally. In this regard, 3D printed medical face shields, respiratory masks, personal protective equipment, PLA-based recyclable air filtration masks, additively manufactured ideal tissue models and new information technology (IT) based rapid manufacturing are some significant contributions of 3DP. Furthermore, a bibliometric study of 3D printing research was conducted in CiteSpace. The most influential keywords and latest research frontiers were found and the 3DP knowledge was categorized into 10 diverse research themes. The potential challenges incurred by AM industry during the pandemic were categorized in terms of design, safety, manufacturing, certification and legal issues. Significantly, this study highlights the versatile role of 3DP in battle against COVID-19 pandemic and provides up-to-date research frontiers, leading the readers to focus on the current hurdles encountered by AM industry, henceforth conduct further investigations to enhance 3DP technology.     

存储系统细粒度加密安全设计

存储系统会有成百上千的存储设备和大量的数据。其中有相当部分敏感数据需要加密存储,然而现有的存储系统只能对整个文件进行加密,而不能对文件某一部分进行加密。尽管其实现方法比较简单,但它会导致系统额外的开销并且极大的影响系统性能。本文提出了存储系统的一种文件细粒度加密方案,它可以充分利用分布式存储内在的特性,有效地利用元数据信息对文件内多个任意大小的数据块进行加密。用户还可以根据数据块的保密级别对不同的数据块定义不同的加密算法以满足需要。对于广泛存在的视频、地图、档案等大文件实现不同粒度加密策略,可减少文件中不必要的数据加密操作,极大提高存储系统的性能。     

Highly dispersed CeO2–x nanoparticles with rich oxygen vacancies enhance photocatalytic performance of g-C3N4 toward methyl orange degradation under visible light irradiation

CeO₂/g-C₃N₄ photocatalysts have attracted tremendous attention in the photocatalytic degradation of organic pollutants. The design and construction of highly active CeO₂/g-C₃N₄ photocatalysts without harsh conditions are still challenging. Herein, highly dispersed CeO_2–x nanoparticles with rich oxygen vacancies were successfully precipitated on the surface of g-C₃N₄ under mild conditions. The fabricated CeO_2–x/g-C₃N₄ exhibits remarkable activity and stability for photocatalytic degradation of MO pollutant. The optimal rate constant of MO degradation over CeO_2–x/g-C₃N₄ is about 0.031 min^?1, which is three times higher than that of g-C₃N₄. A negligible activity decrease is observed after three cycling runs. The enhanced catalytic performance can be ascribed to the excellent dispersion of CeO_2–x with rich oxygen vacancies that benefit O₂ adsorption and visible light absorption. In addition, the proper band alignment between CeO_2–x and g-C₃N₄ is conducive to the highly efficient separation of photogenerated electron–hole pairs.     

添加稀土引致的磷化膜变化与促进机制

用能谱与SEM分析，发现加入稀土硝酸盐(REN)后明显提高了无定形晶体Zn2Fe(PO4)2在磷化膜表面的覆盖率，而使得膜的耐蚀性能提高.此时膜内相关元素含量比例发生了变化：P增大,Zn减小，可见磷对膜耐蚀性的贡献比锌大.讨论认为，稀土硝酸盐是一个有良好载氧能力的催化剂，具有良好的成核促进作用和阴极去极化作用，从而能加速磷化并使膜的耐腐蚀性能提高.      

金属氧化物对金属光泽釉呈色的影响

本文采用佛山地区通用原料，通过正交实验，得出了金属光泽釉的最佳组成。实验发现MnO2是发色主要氧化物；使色差减小的氧化物可同时增加光泽度。与以前金属釉配方相比，所需铅的含量大为降低。