Electronic structure and absolute band edge position of tetragonal AgInS2 photocatalyst: A hybrid density functional study

Energy bands, effective mass of carriers, absolute band edge positions and optical properties of tetragonal AgInS₂ were calculated using a first-principles approach with the exchange correlation described by B3LYP hybrid functional. The results indicate that tetragonal AgInS₂ has a direct band gap of 1.93 eV, which reproduce well experimental value. Calculated effective masses of electrons and holes are both small which are beneficial to separation and migration of electron and hole pairs. This implies that AgInS₂ has good photocatalytic performance. The calculated optical characteristics indicate that AgInS₂ has a slight anisotropy for both the real and imaginary parts of the dielectric function and exhibits large optical absorption in the visible light region. Furthermore, the calculated band edge positions in (100), (010) and (001) surfaces indicate that tetragonal AgInS₂ is beneficial to the reduction and oxidation of water to hydrogen and oxygen under visible light irradiation.     

Thermoelastic evaluation of composite laminates using digital imaging processing

The study of the variation of the curvature of non-symmetric composite laminates with temperature provides a measure of the magnitude of the thermal stresses and the mechanical behavior of the material with temperature. In the present work, an experimental method based on the pioneer use of a digital camera and image processing method is proposed to perform such measurements. Taking advantage of the method and by comparing experimental and CLT, extended-CLT and FEM simulation results, an evaluation of the residual stresses is described and an approach providing more precise determination of the residual thermal stresses in non-symmetric laminates is proposed.     

强力输送带接头识别算法

针对现有的强力输送带故障实时检测方法存在故障定位困难的问题,以接头为基准参考点,提出了一种基于图像处理技术的强力输送带接头识别算法。该算法根据接头点的特征,把接头点用一个数值表示出来,并根据这个数值,以一种简单的方式区分出上、下接头点;然后根据接头的特征,并通过修改最长公共子序列算法的匹配方式,对接头进行识别。实际应用表明,该算法精度高、速度快,可有效识别强力输送带的接头,满足了强力输送带故障检测中接头定位的要求。     

多小区多播无线携能通信鲁棒信干噪比平衡

针对非理想信道多小区多播协作网络中的供能问题,提出了一种鲁棒的无线携能通信优化方案,该方案以最差用户信干噪比最大化为目标、以每用户能量采集和每小区功率为约束,在保证用户能量采集约束和系统功率预算的前提下实现最差用户服务质量最优化.为了求解优化问题,采用半定松弛和S-引理将原始问题转化为拟凸优化问题,进而采用二分迭代算法得到问题的最优解.仿真结果表明,所提系统设计正确,迭代算法收敛特性良好.     

The preparation of coupled WO3/TiO2 photocatalyst by ball milling

The coupled photocatalyst WO₃/TiO₂ is prepared by ball milling by doping WO₃ into TiO₂ and using H₂O solution as disperser. The coupled photocatalyst WO₃/TiO₂ is characterized by UV–VIS diffuse reflection spectrum, X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD) and Transmission electron microscopy (TEM). The results show that the optimum percentage of WO₃ doped is 3% and that the photocatalytic activity of the coupled WO₃/TiO₂ photocatalyst is much higher than that of TiO₂ and WO₃–TiO₂ with no ball milling. Compared with TiO₂, the photoexcited wavelength range of the WO₃/TiO₂ photocatalyst red-shifts about 50 nm, and the light absorption intensity is also improved. The crystal phase of TiO₂ is not changed and new crystal phases are not found during the process of ball milling. WO₃ and TiO₂ coupled highly, forming the WO₃/TiO₂ photocatalyst. The increased photocatalytic activity of the coupled photocatalyst may be attributed to the enhance charge separation efficiency and the extend wavelength range of photoexcitation.     

基于FBG传感器网络的煤矿巷道在线监测系统设计

在掘进和采煤的过程中,巷道围岩的受力情况复杂多变,因此,巷道离层位移和围岩压力的实时监测是保证巷道正常工作的一个重要因素。设计了一种基于FBG传感器网络的煤矿巷道在线监测系统。该系统实现井下700 m数据采集,井上分析处理,可提供时序趋势变化、结构分布变化和阈值报警等功能。根据朱仙庄煤矿巷道的特点,系统安装4只FBG位移传感器、4只FBG土压力传感器和4只FBG温度传感器,对巷道掘进区域的离层位移、围岩压力和温度变化进行在线监测。监测结果表明:系统对离层位移、围岩压力和巷道温度变化反映灵敏,能够有效保证巷道掘进的正常进行,且为后续巷道施工提供数据支持和理论依据。     

网络技术技能型人才培养模式的实践研究

网络技术专业贴合社会和企业对人才专业技能的需求,以加强校企合作,培养高职网络技术专业技能型人才为目标,探索出一条适合网络技术专业具体实践的、有利于学生发展的校企共建的技能型人才培养模式。     

级联No序列的三项式特性研究

利用有限域GF(2n)到其子域GF(2m)上的迹函数及其性质,研究一类非线性扩频序列的密码学性质,即级联No序列的三项式特性。给出级联No序列的三项生成多项式的形式,将级联No序列三项式特性的结论应用到二元No序列中,解决了二元No序列的三项式特性问题。分析结果表明,级联No序列不仅具有三项式对,而且具有正则三项式对。     

淮水北调输水管道关键技术研究与应用

介绍了输水主管道的设计制造关键技术问题,通过比较备选管材特性,研究了选用的PCCP管道设计制作技术、空气阀布置设计和管道基座安装技术,对管道铺设方案、煤矿塌陷区的地基变形进行了分析。     

基于PSO的负反馈电路参数自适应优化及仿真分析

采用粒子群优化算法,以电压增益、共模抑制比、输入电阻平方根的三者乘积对输出电阻的比作为适应度函数,对差分 共射两级直接耦合电压串联负反馈放大电路中的电阻做自适应优化。结果显示,只要对电路交流指标加以约束,适应度函数值总会减小。当分别对增大电压增益和减小输出电阻进行限制后,电压增益总是尽量小,输出电阻总是尽量大,以使适应度函数在给定约束下取得最大。经EWB软件对优化参数仿真,结果满足线性放大要求。同时说明了可以调整适应度函数形式,找到最佳电路参数,以满足工程上对放大器指标的不同需求。