Controlling Au electrode patterns for simultaneously monitoring electrical actuation and shape recovery in shape memory polymer

This paper presents an effective approach to achieve efficient electrical actuation and monitoring of shape recovery based on patterned Au electrodes on shape memory polymer (SMP). The electrically responsive shape recovery behavior was characterized and monitored by the evolution change in electrical resistance of patterned Au electrode. Both electrical actuation and temperature distribution in the SMP have been improved by optimizing the Au electrode patterns. The electrically actuated shape recovery behavior and temperature evolution during the actuation were monitored and characterized. The resistance changes could be used to detect beginning/finishing points of the shape recovery. Therefore, the Au electrode not only significantly enhances the electrical actuation performance to achieve a fast electrical actuation, but also enables the resistance signal to detect the free recovery process.     

Characteristics and formation mechanism of porosities in CFRP during laser joining of CFRP and steel

An experimental investigation on the mechanism of porosity formation during the laser joining of carbon fiber reinforced polymer (CFRP) and steel is presented. The porosity morphology and distribution were characterized by optical and scanning electron microscopy, and the thermal pyrolysis behaviors were investigated by thermal analysis and designed back-side cooling experiments. The results show that there are two types of porosities in CFRP. Porosity I only appears when the heat input is more than 77.8 J/mm. It has a smooth inner wall and distributes near the bonding interface between CFRP and steel at the central area of melted zone, which is caused by gaseous products such as CO₂, NH₃, H₂O, and hydrocarbons produced by the pyrolysis of CFRP. Porosity II can be seen under all joining conditions. It has a rough inner wall and distributes far away from the bonding interface, concentrating at the final solidification locations. Porosity II is caused by the shrinkage of melted CFRP during solidification stage.     

“是即(则)是P”特征、功能及其演变

从构式语法角度主要对唐宋禅录里的"是即(则)是P"句式进行考察,认为该句式的句式义表示对某种行为事件的保留性肯定,但是还存在某种局限性,具有评判认定、修正补充、主题承接等语用功能。"是即(则)是P"受汉译佛经影响,在唐宋时期的禅籍里产生并常常使用,具有A式和B式两种具体的表达形式,基本语用功能一致。其中A式出现于北宋早期,专用于禅籍文献,是禅家参禅实践活动中一种特殊句式,B式在南宋后来的世俗文献里也常常可见,反映了佛禅文献的传播对近代汉语发展演变的影响。     

Exergoeconomic performances of the desiccant-evaporative air-conditioning system at different regeneration and reference temperatures

This paper presented the exergoeconomic evaluation of the developed desiccant-evaporative air-conditioning system. The developed system was evaluated based on the steady-state conditions at different regeneration and reference temperatures. The exergoeconomic evaluation method was implemented to the system components and the whole system to evaluate the exergy efficiency, exergy destruction ratios, cost rates, relative cost differences and exergoeconomic factors. The regeneration and reference temperatures affected the exergy efficiencies, exergy destruction ratios, cost rates, relative cost differences and exergoeconomic factors. The desiccant wheel, heating coil and evaporative cooler had a high cost rate (investment cost, operation and maintenance cost, and exergy destruction cost). The exit air fan, outdoor air fan and evaporative cooler had a high relative cost difference. The exit air fan, outdoor air fan and secondary heat exchanger had a high exergoeconomic factor. Replacement of the desiccant wheel with a higher dehumidification performance could decrease the high cost rate. A higher efficiency evaporative cooler and heating coil were needed. Cheaper air fans (outdoor air fans and exit air fans) were needed.     

Preparation,characterization and properties of polycaprolactone diol-functionalized multi-walled carbon nanotube/thermoplastic polyurethane composite

Multi-walled carbon nanotubes (MWCNTs) were chemically functionalized to prepare thermoplastic polyurethane (PU) composites with enhanced properties. In order to achieve a high compatibility of functionalized MWCNTs with the PU matrix, polycaprolactone diol (PCL), as one of PU’s monomers, was selectively grafted on the surface of MWCNTs (MWCNT–PCL), while carboxylic acid groups functionalized MWCNTs (MWCNT–COOH) and raw MWCNTs served as control. Both MWCNT–COOH and MWCNT–PCL improved the dispersion of MWCNTs in the PU matrix and interfacial bonding between them at 1 wt% loading fraction. The MWCNT–PCL/PU composite showed the greatest extent of improvement, where the tensile strength and modulus were 51.2% and 33.5% higher than those of pure PU respectively, without sacrificing the elongation at break. The considerable improvement in both mechanical properties and thermal stability of MWCNT–PCL/PU composite should result from the homogeneous dispersion of MWCNT–PCL in the PU matrix and strong interfacial bonding between them.     

Effect of chemical phosphorylation on solubility of buffalo milk proteins

Buffalo milk proteins (casein, co-precipitate or whey protein concentrate) were phosphorylated with phosphorus oxychloride (POCl₃) at three different pH values (5.0, 7.0 and 9.0). The solubilities of phosphorylated milk proteins were examined over the pH range 3.0–9.0 in water and ionic (0.1 m NaCl or 10–70 mm Ca²⁺) systems. The solubilities of buffalo milk proteins decreased at pH 3.0, while there was an increase in the solubilities of casein and co-precipitate near their isoelectric points upon phosphorylation. Solubilities of these phosphorylated milk proteins were pH dependent in 0.1 m NaCl but there was a decrease in their solubilities with increase in calcium ion concentration. This alteration could be due to the shifting of isoionic points of phosphorylated buffalo milk proteins towards acidic pH.     

Development of polyurethane elastomer composite materials by addition of milled fiberglass with coupling agent

Polyurethane elastomer composites were developed using milled fiberglass and their mechanical properties were studied. In particular, the organically chemical treatment of the milled fiberglass was investigated in detail. It was demonstrated that both strength and toughness of the resulting elastomer composites were improved considerably with the addition content of fiberglass. Furthermore, it was indicated that the optimal properties can be achieved by the proper addition of milled fiberglass that was chemically treated using coupling agent.     

Thermal stability of metal-doped diamond-like carbon fabricated by dual plasma deposition

Metal incorporation into amorphous diamond-like carbon films can provide superior properties as metal nano-clusters or nanocrystalline metallic carbides can be embedded in the carbon network. In this work, a filtered metal plasma cathodic arc technique is used to generate a metal plasma and acetylene is introduced to the metal plasma plume to deposit metal-containing DLC (Me-DLC) films and form nanocrystalline carbide phases in the amorphous carbon matrix. The films exhibit high thermal stability up to annealing temperatures of 500 °C as revealed by X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. At treatment temperature over 500 °C, a large amount of hydrogen is lost from the Me-DLC films as shown by elastic recoil detection. Breakdown and structural collapse of the film at high temperature can be attributed to the breaking of C–H bonds. Consequently, the C–C networks become more graphite-like to facilitate the formation of volatile C–O and metal oxides phases.     

POWER OPTIMIZATION OF FINITE STATE MACHINE BASED ON GENETIC ALGORITHM

Using state assignment to minimize power dissipation and area for finite state machines is computationally hard.Most of published results show that the reduction of switching activity often trades with area penalty.In this paper,a new approach is proposed.Experimental results show a significant reduction of switching activity without area penalty compared with previous publications.