Theoretical hardness of the cubic BC2N

Vickers hardness of the cubic BC₂N has been investigated using the microscopic hardness model, in which the parameters have been obtained using first principles calculations. Ionicities of the chemical bonds in the cubic BC₂N depend on their surrounding chemical environments, which are included in the hardness calculations of the cubic BC₂N using the population ionicity scale. For the four selected configurations of the cubic BC₂N, the theoretical Vickers hardness has been found to lie between 70 and 72 GPa, consistent with the experimental value of 76 GPa. According to our calculations, it should be the cubic BC₂N that ranks second among the superhard materials instead of the cubic BN.     

Characterization of the ceramic–metal brazed interface using ultrasonic technique

Sintered Al₂O₃ is brazed with 304 stainless steel (SS) using 97(Ag28Cu)3Ti active filler alloy at 1000 °C. Electron Probe Micro Analysis (EPMA) studies of the interfaces are carried out. The thickness of the interfaces are measured from the concentration penetration profile. Shear strength of the joint is evaluated. The qualities of the joints are characterized using ultrasonic technique. Mechanical properties of the joints are correlated with the obtained ultrasonic signals during the ultrasonic scanning of the sample.     

Effect of Heavy Rare Earth Dopants on Hydrogen Incorporation in SmCo 2:17 Type Magnet

Previous studies showed that the temperature coefficient of obviously decreases with increasing the content of heavy rare earth element in SmCo magnet. But the investigation on the hydrogen incorporation in SmCo magnet is limited. In this paper, we would like to report the effect of heavy rare earth dopant on hydrogen incorporation in SmCo 2:17 type magnet. The relationship between temperature and pressure in hydrogenatied magnet is studied using XRD, DTA, and magnetic measurement. Based on the experimental results, the initial hydrogenation temperature decreases with increasing the content of heavy rare earth, however, the initial saturation pressure enhances. During the hydrogenation, the temperature region shrinks with increasing heavy rare earth doping.     

Thermoelastic evaluation of composite laminates using digital imaging processing

The study of the variation of the curvature of non-symmetric composite laminates with temperature provides a measure of the magnitude of the thermal stresses and the mechanical behavior of the material with temperature. In the present work, an experimental method based on the pioneer use of a digital camera and image processing method is proposed to perform such measurements. Taking advantage of the method and by comparing experimental and CLT, extended-CLT and FEM simulation results, an evaluation of the residual stresses is described and an approach providing more precise determination of the residual thermal stresses in non-symmetric laminates is proposed.     

Electrochemical properties of nanodiamond powder electrodes

Detonation-synthesized nanocrystalline diamond is a novel carbon material. Its increased electrical conductivity, due to the features of giant specific surface area and large numbers of surface defects as well as the cluster structure, makes it possible to be used as an electrode material. Nanodiamond powder electrodes were fabricated and the electrochemistry was investigated by cyclic voltammetry and AC impedance measurement. The results show that nanodiamond powder electrode is electrochemically stable in KCl electrolytes over a wide potential range (− 1.2–2.0 V). The electrode reaction is quasi-reversible in 0.1 M KCl containing the ferricyanide–ferrocyanide redox couple. The electrode reaction rate constant k is estimated to be 2.87 × 10^− 3 cm/s. The peak current increases linearly with the rising of the concentration of [Fe(CN)₆]^3−/4−. The AC impedance spectra have been analyzed and an equivalent circuit proposed.     

基于动态时间规整的手势加速度信号识别

为了提高基于加速度传感器的动态手势识别算法的性能,本文采用了动态时间规整(DTW)识别算法。通过该算法计算测试模板和参考模板的相似度,从而得出识别结果。为了验证该方法,建立了一套手势加速度无线采集系统,并采集了41个志愿者的手势信息。实验结果表明,该方法手势平均识别率在97%以上。与HMM识别算法相比,DTW识别算法在识别的准确率上比HMM识别算法更具优势。     

基于IEEE1451.2的智能变送器接口模块的设计与实现

IEEE1451.2标准为将不同的智能变送器连接到网络适配器(NCAP)或微处理器制定了一个统一的数字接口,真正实现了现场设备的即插即用。简述了IEEE1451.2标准,重点介绍了智能变送器接口模块(STIM)的软硬件设计思想和测试平台,通过实践验证了采用ADuC812芯片实现智能变送器接口模块的可行性。     

具有时变状态滞后2-D离散系统的稳定与镇定(英文)

针对一类由局部状态空间(LSS)Fornasini-Marchesini(FM)第二模型描述的,具有时变状态滞后的2-D离散系统,其中时变滞后项的上、下界均为正实数,研究了其稳定性和控制综合问题。首先,利用Lyapunov-Krasovski泛函方法,提出了系统的稳定性准则。再根据这一准则,分别设计状态反馈和动态输出反馈控制器保证系统的稳定性。状态反馈控制律和输出反馈矩阵可由线性矩阵不等式(LMI)求得。最后,通过数值算例说明所得结果的有效性。     

实验室排课系统开发与使用

实验室是学生实践实验的必要场所,但是所有高校都会面临着实验室少,学生人数多,如何更好分配实验室的使用,是实验室管理人员值得考虑的首要问题。针对此问题,本院校实验室结合自己实验室的真实情况编写实验室排课系统。     

企业图书管理信息系统的设计与实现

本文采用三层架构开发了图书管理信息系统,解决了开发中的一些关键问题,并利用豆瓣API实现图书详细信息的快速录入,对同类软件的开发具有一定的指导作用。