当代室内环境生态评估与生态审美价值观的传播

价值观的传播是一个缓慢的过程,在当前工业文明向生态文明过渡的时期,如何有效地提升民众的生态意识是值得探讨的问题。以生态审美意识传播为切入点,通过了解国内外主流的室内环境生态评估指标体系的前后变化,总结当前室内环境生态评估的变化趋势及其主要特征;从指标体系的变化中分析生态审美价值观的渗透方式,探讨当代室内环境生态评估对生态审美价值观传播的促进作用。最后,通过实验设定针对室内传统营造技艺应用的评估工具,并且在评估工具的使用过程中展示传播的模式与效用,通过评估反馈再一次验证室内环境生态评估对生态审美价值观的正向传播作用。     

Carbon nanotube filter for heavy metal ion adsorption

This study investigated carbon nanotube filtration technology using catalyst particles supported on silicalite-1–biomorphic carbon materials (BCMs). Aqueous solutions of Mn(II), Cu(II), Cr(III), Cd(II), and Pb(II) were used to test the efficiency of heavy metal ions removal. Carbon nanotubes (CNTs) were synthesized and grown on BCMs by the chemical vapor deposition method catalyzed with the catalyst (Co, Fe, and Ni). The synthesized CNTs with Co– and Fe– nanoparticles were typically multi-walled carbon nanotubes, and they showed good crystallinity (I_D/I_G = 1.05) and yield of (11.10 and 8.86) %. The removal efficiency of Mn(II), Cu(II), Cr(III), Cd(II), and Pb(II) ions using Co-catalyzed CNT filter was 97.57%, 98.01%, 97.89%, 97.42%, and 99.99%, respectively.     

Influence of surface topography evolution of grinding wheel on the optimal material removal rate in grinding process of cemented carbide

Most of the reported studies on the optimization of grinding parameters do not consider the evolution of the surface topography of grinding wheels, and the established empirical models will no longer apply when the surface conditions of the grinding wheel changes. In this paper, an integrated model based on the surface topography of grinding wheel is established. The grinding process of cemented carbide is simulated using the established model, and the simulation results are analyzed to obtain the surface roughness model and the specific grinding energy model based on the undeformed chip thickness distribution. Subsequently, the grinding constraint models are defined according to the two grinding constraints—surface roughness and specific grinding energy. Through inversion analysis, the maximum material removal rate of the given grinding wheel surface conditions satisfying the defined grinding constraints are obtained, and the influence rules of the grinding wheel surface conditions on the maximum material removal rate are analyzed. Then the grinding wheel surface conditions are adjusted by changing the radial dressed height of the grinding wheel and the arrangement distance of the grains in wheel circumferential direction to improve the maximum material removal rate of the grinding wheel. Finally, the optimization results are verified through grinding tests of cemented carbide.     

Research on charge ordering and magnetic properties in La0.3Ca0.7Mn1-xWxO3 system

The perovskite manganite sample La0.3Ca0.7Mn1-xWxO3 （x = 0.08, 0.12） was prepared by the solid-state reaction method. The effect of W doping on the Mn site to La0.3Ca0.7MnO3 charge ordering phase and the changing process of magnetic properties were studied through the measurement of the M-T curve, M-H curves, and ESR curves of the sample. The results showed that when x = 0.08, the charge ordering （CO） phase exists in the system, the transition temperature Tco= 275 K, and the system exhibits PM when T 〉 275 K. The system transforms from spin-disordering paramagnetism to spin-ordering antiferromagnetism in the charge ordering state with the temperature decreasing from 275 K to 230 K. The long-range antiferromagnetism forms and AFM/CO states coexist between 230 K and 5 K. There is a little ferromagnetic component in the AFM/CO background in a low temperature range. When x = 0.12, the CO phase in the system has almost melted completely. There is a little remnant of the CO phase below 150 K. The system exhibits paramagnetism when T 〉 150 K and transforms from paramagnetism to ferromagnetism when T〈 150 K.     

Fabrication of nano-porous silicon oxide layers by plasma polymerisation methods

We report on the synthesis of nano-porous silicon oxide (SiO₂) layers by gas phase polymerisation reactions of hexamethy disiloxane and oxygen. The SiO₂ layers are deposited onto one or more layers of poly(methylmethacrylate) (PMMA) particles spin coated onto the substrate surface. Subsequent annealing of the films to high temperature (500 °C) leads to the pyrolysis of the polymeric particles resulting in a 3D nanoporosity in the film. X-ray Photoelectron (XPS) and Fourier Transform Infra Red Spectroscopy (FTIR) show an SiO₂-like surface chemistry and virtually complete removal of the organic components. These materials offer a very high surface area-to-volume ratio suitable for sensing applications.     

运用信息通信技术建设城市应急平台初探

由于非传统安全涵义的不断拓展,尤其是城市建筑、交通、能源、水电、通讯等构成要素的日益多元化和社会公众对＂安全指数＂的迫切需求,为有效整合社会资源,形成社会合力,完善应对机制,设置由反城市恐怖及防灾减灾和公共卫生等专业人员组成的＂城市应急指挥中心＂机构,具有重大的意义。文章探讨了运用信息通信技术及设备建设城市应急平台。     

高职计算机专业校内生产性实训教学模式研究

校内生产性实训是培养具有高素质技能人才的重要手段与教学形式．其对于提升高职教育内涵、服务经济与社会发展具有重要的意义。分析当前高职院校校内生产性实训的现状、特点与类型,在笔者所在学院的实践基础上,构建计算机专业校内生产性实训的“教、学、生产一体化”的教学模式．     

苏州市景观水体表观污染类型识别及特征指标筛选

为解决表观污染成因的问题,以苏州市区河网为主要研究对象,采集796个数据样本,对景观水体的表观污染类型进行划分界定,并通过对数据样本的统计分析,探究水体表观污染类型和水质指标之间的关系。结果表明:氧化还原电位、溶解氧、叶绿素a、高锰酸盐指数和浊度对不同污染类型的水体具有很好的区分度,可作为主要特征指标;景观水体可分为有机主导型、无机主导型、营养主导型和混合型4种表观污染类型;不同表观污染水体判别的优先次序为有机主导型、无机主导型、营养主导型、混合型。     

Granular multiple kernel learning for identifying RNA-binding protein residues via integrating sequence and structure information

Neural Computing and Applications - RNA-binding proteins play an important role in the biological process. However, the traditional experiment technology to predict RNA-binding residues is...     

基于LabWindows/CVI信号时域处理系统的设计

基于LabWindows/CVI软件开发平台,设计了信号时域处理分析系统,从而实现了对所采集的原始信号波形在时域中的信号叠加、信号的积分微分、相关分析以及卷积处理,通过与成熟软件Matlab对比,此设计正确可行、系统运行稳定可靠.