As the number falls,alternatives to the Hagberg–Perten falling number method: A review

This review examines the application, limitations, and potential alternatives to the Hagberg–Perten falling number (FN) method used in the global wheat industry for detecting the risk of poor end-product quality mainly due to starch degradation by the enzyme α-amylase. By viscometry, the FN test indirectly detects the presence of α-amylase, the primary enzyme that digests starch. Elevated α-amylase results in low FN and damages wheat product quality resulting in cakes that fall, and sticky bread and noodles. Low FN can occur from preharvest sprouting (PHS) and late maturity α-amylase (LMA). Moist or rainy conditions before harvest cause PHS on the mother plant. Continuously cool or fluctuating temperatures during the grain filling stage cause LMA. Due to the expression of additional hydrolytic enzymes, PHS has a stronger negative impact than LMA. Wheat grain with low FN/high α-amylase results in serious losses for farmers, traders, millers, and bakers worldwide. Although blending of low FN grain with sound wheat may be used as a means of moving affected grain through the marketplace, care must be taken to avoid grain lots from falling below contract-specified FN. A large amount of sound wheat can be ruined if mixed with a small amount of sprouted wheat. The FN method is widely employed to detect α-amylase after harvest. However, it has several limitations, including sampling variability, high cost, labor intensiveness, the destructive nature of the test, and an inability to differentiate between LMA and PHS. Faster, cheaper, and more accurate alternatives could improve breeding for resistance to PHS and LMA and could preserve the value of wheat grain by avoiding inadvertent mixing of high- and low-FN grain by enabling testing at more stages of the value stream including at harvest, delivery, transport, storage, and milling. Alternatives to the FN method explored here include the Rapid Visco Analyzer, enzyme assays, immunoassays, near-infrared spectroscopy, and hyperspectral imaging.     

A model- and simulation-based approach for tolerancing and verifying the functional capability of micro/nano-structured workpieces

The evaluation of functional features of manufactured workpieces is based on GO- and NO-GO-test results, which are obtained by comparing measured geometric characteristics with nominal dimensions and tolerances specified by the designer. These geometrical specifications are based on a tolerancing system, which was originally defined for the function mating capability. Against the background of upcoming lots of other new functions (like reduction of flow resistance, light absorption, reduction of friction, diffraction of light, self-cleaning or mass transmission) are to be realized with our products – particularly by micro- and nano scaled features. If the verification process will deliver the prediction of the achievable degree of functionality, the usability of a part can be assessed more accurately and in consequence quality and economics can be improved. So, a new principle for tolerancing and verifying turns out to be necessary. In this paper the fundamental deficit of the actual tolerancing and specification systems GPS and ASME Y14.5 is derived and the path for enlarging the system by preposing a functional model is shown. To verify the functional capability of the workpieces an approach based on simulations done with the parameterized mathematical–physical model of the function is suggested. Advantages of this approach will be discussed and demonstrated by examples with microstructured inking rolls, crankshafts and injection valves.     

Significant spatial co-distribution pattern discovery

Given instances (spatial points) of different spatial features (categories), significant spatial co-distribution pattern discovery aims to find subsets of spatial features whose spatial distributions are statistically significantly similar to each other. Discovering significant spatial co-distribution patterns is important for many application domains such as identifying spatial associations between diseases and risk factors in spatial epidemiology. Previous methods mostly associated spatial features whose instances are frequently located together; however, this does not necessarily indicate a similarity in the spatial distributions between different features. Thus, this paper defines the significant spatial co-distribution pattern discovery problem and subsequently develops a novel method to solve it effectively. First, we propose a new measure, dissimilarity index, to quantify the difference between spatial distributions of different features under the spatial neighbor relation and then employ it in a distribution clustering method to detect candidate spatial co-distribution patterns. To further remove spurious patterns that occur accidentally, the validity of each candidate spatial co-distribution pattern is verified through a significance test under the null hypothesis that spatial distributions of different features are independent of each other. To model the null hypothesis, a distribution shift-correction method is presented by randomizing the relationships between different features and maintaining spatial structure of each feature (e.g., spatial auto-correlation). Comparisons with baseline methods using synthetic datasets demonstrate the effectiveness of the proposed method. A case study identifying co-morbidities in central Colorado is also presented to illustrate the real-world applicability of the proposed method.     

Effect of structure on the properties of polyurethanes based on aromatic cardanol-based polyols prepared by thiol-ene coupling

Industrial-grade cardanol and 2-mercaptoethanol were reacted to generate hydroxyl-functionalized cardanol by UV, free-radical-initiated thiol-ene coupling between the double bond moieties of the cardanol long carbon side chain and thiol functional groups. The average hydroxyl number of the hydroxyl-functionalized cardanol was controlled by reaction time, with the hydroxyl values of this ranging within 168–201 mg KOH g⁻¹. This cardanol was then used as a polyol to prepare cardanol-based polyurethane with hexamethylene diisocyanate and a NCO/OH ratio of 1. To compare the effect of cardanol-based polyols with the properties of cardanol-based polyurethane, cardanol modified with 10-undecylenate was used as a raw material to prepare cardanol-based polyols, including the long carbon chain of 10-undecylenate. All properties were examined, and data revealed that cardanol-based polyols including this long carbon chain can improve the hydrophobic and mechanic properties of the cardanol-based polyurethane.     

It doesn’t take a village to fall for misinformation: Social media use,discussion heterogeneity preference,worry of the virus,faith in scientists,and COVID-19-related misinformation beliefs

With the circulation of misinformation about the COVID-19 pandemic, the World Health Organization has raised concerns about an “infodemic,” which exacerbates people’s misperceptions and deters preventive measures. Against this backdrop, this study examined the conditional indirect effect of social media use and discussion heterogeneity preference on COVID-19-related misinformation beliefs in the United States, using a national survey. Findings suggested that social media use was positively associated with misinformation beliefs, while discussion heterogeneity preference was negatively associated with misinformation beliefs. Furthermore, worry of COVID-19 was found to be a significant mediator as both associations became more significant when mediated through worry. In addition, faith in scientists served as a moderator that mitigated the indirect effect of discussion heterogeneity preference on misinformation beliefs. That is, among those who had stronger faiths in scientists, the indirect effect of discussion heterogeneity preference on misinformation belief became more negative. The findings revealed communication and psychological factors associated with COVID-19-related misinformation beliefs and provided insights into coping strategies during the pandemic.     

The development of a single-item Food Choice Questionnaire

Based on the multi-item Food Choice Questionnaire (FCQ) originally developed by Steptoe and colleagues (1995), the current study developed a single-item FCQ that provides an acceptable balance between practical needs and psychometric concerns. Studies 1 (N = 1851) and 2 (2a (N = 3290), 2b (N = 4723), 2c (N = 270)) showed that the single-item FCQ scale has good convergent and discriminant validity. Generally, the results showed the highest correlations with the related multi-item dimensions (>0.40). Study 2 refined the scale. Only the items for convenience (Study 2a), sensory appeal (Study 2b) and mood (Study 2c) needed to be revised (as Study 1 showed a correlation between the multi-item and the single-item below the threshold of 0.60). The results also showed comparable predictive validity. Both methods revealed similar association patterns between food motives and consumption behaviours (Fisher’s z tests revealed agreements of 86.2% for Study 1, 92.9% for Study 2a and 100% for Studies 2b and 2c). Study 3 (N = 6062) showed an example of the added value of a context-specific application for the single-item FCQ. Different motives were shown to be relevant across contexts, and the context-specific motives had additional explained variance beyond the general multi-item FCQ. Studies 2b and 3 also showed the performance of the single-item FCQ in an international context. In sum, the results indicate that the single-item FCQ can be used as a flexible and short substitute for the multi-item FCQ. The study also discusses the conditions that should be considered when using the single-item scale.     

Masking the Peroxidase-Like Activity of the Molybdenum Disulfide Nanozyme Enables Label-Free Lipase Detection

Two-dimensional MoS₂ nanoparticles (2D-nps) exhibit artificial enzyme properties that can be regulated at bio-nanointerfaces. We discovered that protein lipase is able to tune the peroxidase-like activity of MoS₂ 2D-nps, offering low-nanomolar, label-free detection and identification in samples with unknown identity. The inhibition of the peroxidase-like activity of the MoS₂ 2D-nps was demonstrated to be concentration dependent, and as low as 5 nm lipase was detected with this approach. The results were compared with those obtained with several other proteins that did not display any significant interference with the nanozyme behavior of the MoS₂ 2D-nps. This unique response of lipase was characterized and exploited for the successful identification of lipase in six unknown samples by using qualitative visual inspection and a quantitative statistical analysis method. The developed methodology in this approach is noteworthy for many aspects; MoS₂ 2D-nps are neither labeled with a signaling moiety nor modified with any ligands for signal readout. Only the intrinsic nanozyme activity of the MoS₂ 2D-nps is exploited for this detection approach. No analytical equipment is necessary for the visual detection of lipase. The synthesis of the water-soluble MoS₂ 2D-nps is low costing and can be performed in bulk scale. Exploring the properties of 2D-nps and their interactions with biological materials reveals highly interesting yet instrumental features that offer the development of novel bioanalytical approaches.     

Al2O3–CaO macroporous ceramics containing hydrocalumite-like phases

A mechanism to explain the lower onset strengthening temperature induced by CaCO₃ in alumina-based macroporous ceramics is proposed, which relies on hydrocalumite-like phase formation during processing. Close to 600 °C, such phases are decomposed to lime and mayenite (12CaO·7Al₂O₃), where the latter, due to its intrinsic nanoporosity and high thermal reactivity, generates bonds between the ceramic particles at ∼700 °C, resulting in microstructure strengthening. Based on this premise, the authors concluded that other Ca²⁺ sources could act similarly. Indeed, compositions containing Ca(OH)₂ or CaO showed the same effect on the onset strengthening temperature, which reinforces the proposed mechanism. The results attained indicated that macroporous insulators could be thermally treated at lower temperatures, just to acquire enough mechanical strength for installation, finishing in-situ their firing process. Besides that, lower sintering temperatures could be used to produce macroporous ceramics that would be applied in low thermal demand environments, e.g. aluminum industries.