Mechanical properties of graphene films enhanced by homo-telechelic functionalized polymer fillers via π–π stacking interactions

Most researches on graphene/polymer composites are focusing on improving the mechanical and electrical properties of polymers at low graphene content instead of paying attention to constructing graphene’s macroscopic structures. In current study the homo-telechelic functionalized polyethylene glycols (FPEGs) were tailored with π-orbital-rich groups (namely phenyl, pyrene and di-pyrene) via esterification reactions, which enhanced the interaction between polyethylene glycol (PEG) molecules and chemical reduced graphene oxide (RGO) sheets. The π–π stacking interactions between graphene sheets and π-orbital-rich groups endowed the composite films with enhanced tensile strength and tunable electrical conductivity. The formation of graphene network structure mediated by the FPEGs fillers via π–π stacking non-covalent interactions should account for the experimental results. The experimental investigations were also complemented with theoretical calculation using a density functional theory. Atomic force microscope (AFM), scanning electron microscope (SEM), X-ray diffraction (XRD), nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), UV–vis and fluorescence spectroscopy were used to monitor the step-wise preparation of graphene composite films.     

利用二进制数算法寻找5个点的Ramsey图

用二进制数来表示完全图的各种组合,借助计算机编程可从完全图的各种组合中寻找出ramsey图。5个顶点的Ramsey图是最基本的Ramsey图,这种基本方法为寻找更复杂的Ramsey图提供了基础。     

高校多媒体教室有效性管理探究

随着多媒体技术的不断发展及多媒体教学的普及,高校的多媒体教室日益增多,加大了管理的难度。在人力资源有限的情况下,怎样有效管理多媒体教室是亟待解决的问题。本文笔者通过分析管理中出现的问题,测试了多种管理方式,并分析了它们的优缺点,最后确定使用多媒体教室管理系统软件方式来有效管理多媒体教室。     

Ensemble deep transfer learning driven by multisensor signals for the fault diagnosis of bevel-gear cross-operation conditions

The existing intelligent fault diagnosis techniques of bevel gear focus on single-sensor signal analysis under the steady operation condition. In this study, a new method is proposed based on ensemble deep transfer learning and multisensor signals to enhance the fault diagnosis adaptability and reliability of bevel gear under various operation conditions. First, a novel stacked autoencoder(NSAE) is constructed using a denoising autoencoder, batch normalization, and the Swish activation function. Second, a series of source-domain NSAEs with multisensor vibration signals is pretrained. Third, the good model parameters provided by the source-domain NSAEs are transferred to initialize the corresponding target-domain NSAEs. Finally, a modified voting fusion strategy is designed to obtain a comprehensive result. The multisensor signals collected under the different operation conditions of bevel gear are used to verify the proposed method. The comparison results show that the proposed method can diagnose different faults in an accurate and stable manner using only one target-domain sample, thereby outperforming the existing methods.     

Facile Fabrication of Povidone Iodine-Embedded Polytetrafluoroethylene Superhydrophobic Films with Improved Antiadhesive and Bactericidal Properties in Bacterial Environments

It remains a challenge to maintain the antiadhesion properties of superhydrophobic films after exposure to bacterial environments. In this work, superhydrophobic bactericidal polymer films via the simple incorporation of polyvinylpyrrolidone-iodine (PVP-I) or iodine into polytetrafluoroethylene (PTFE) are fabricated to improve their antiadhesive and antibacterial capability. Superhydrophobic iodine-embedded films, polytetrafluoroethylene/polyvinylpyrrolidone-iodine and polytetrafluoroethylene-iodine (PTFE/PVP-I and PTFE-I), show excellent antiadhesive and bactericidal performances even post exposure to bacterial solutions as compared to iodine-free counterparts by controlling the release of iodine. Especially, superhydrophobic PTFE/PVP-I films display a more sustained iodine release profile and significant antibacterial properties against gram-positive (S. aureus, methicillin-resistant S. aureus (MRSA)) and gram-negative (E. coli) bacteria. Such a facile combination of antiseptic agents and superhydrophobic surface could be widely used for antiseptic biomedical applications.     

Study on the Influence of Different Energy Sources on the Structure and Mechanical Properties of a Welded Joint from an EP693 Nickel Alloy

Russian Journal of Non-Ferrous Metals - The results of a study on the influence of types of welding (laser, electron beam, and argon arc) on the properties of a permanent joint made of an EP693...     

5%Si高硅奥氏体不锈钢元素偏析及均匀化处理

 高硅奥氏体不锈钢由于高含量硅元素的加入使其具有优异的耐高温腐蚀性能和较低的成本,在制酸行业有着潜在的应用价值。然而,该合金中高含量硅元素的加入会促进凝固过程中溶质再分配,进而造成显著的元素偏析,最终导致合金内部产生枝晶组织和大量的有害相。对铸锭组织进行均匀化处理能够有效消除枝晶与元素偏析,促进析出相回溶和枝晶消融,从而改善材料的热塑性,有效应对热变形开裂问题。因此,采用金相显微镜(OM)、扫描电镜能谱分析(SEM/EDS)、电子探针(EPMA)、JMatPro软件计算等方法,研究了实验室条件下制备的5%Si高硅奥氏体不锈钢铸锭的显微组织和元素分布状态,通过残余偏析指数、扩散动力学计算并结合均匀化处理试验验证,最终确定了5%Si高硅奥氏体不锈钢合理的均匀化处理工艺。结果表明,5%Si高硅奥氏体不锈钢凝固过程中钼元素偏析最为严重,通过残余偏析指数模型计算得到的均匀化动力学方程可用来指导该成分合金的均匀化处理工艺;5%Si高硅奥氏体不锈钢经过1 150 ℃×12 h均匀化处理后,铸锭内枝晶消融,元素偏析基本消除,析出相与铁素体回溶到基体中,合金转变为全奥氏体组织,热塑性得到改善;当加热温度达到1 250 ℃时,合金出现过烧现象,晶界开始熔化。     

Free energy barrier for compact chains escaping from a small sphere

In this paper, the process of compact polymer chains escaping from a small sphere to a large one in the view of thermodynamics is investigated in detail based on the pruned-enriched-Rosenbluth method (PERM), which is quite efficient for the three-dimensional polymers on the simple-cubic lattice. In our simulation, three representative states of a polymer chain during the escaping process are studied, and some statistical properties of the chain size and the chain shape, such as mean-square radius of gyration per bond 〈S²〉/N and the shape factor 〈δ^∗〉 are investigated. Our aim is to illuminate how the size and shape of the compact chains change during the escaping process. The changes of 〈S²〉/N and 〈δ^∗〉 are not monotone and it is due to the fact that the chain should stretch itself in the escaping process. In the meantime, some thermodynamic properties are also calculated here. The hole is designed to be small enough to allow only one monomer at a time and it thus reduces the number of allowed chain conformations and breaks contacts between monomers at the beginning of the process. Additionally, we discuss the free energy barrier per bond H₂ − H₁ = ΔH of a compact chain, and here H₂ is the maximum free energy per bond during the process and H₁ is the minimum one when the compact chain is within the small sphere. Averaging free energy barrier over chain length N is convenient for the comparison with different chain lengths. ΔH as a function of chain length N and radius r₁ of the small sphere is also studied and our result shows that ΔH for longer chains is lower means that it is relatively easier for each bond in longer chains to surmount the free energy barrier to escape. Some discussions about the self-avoiding walk (SAW) and swollen chains are also made for the comparison, and our results also show that the restriction of the small sphere on the SAW and the swollen chains is more effective because of their relatively looser intrinsic structure.