Tungsten-based heterogeneous multilayer structures via diffusion bonding

Recent work has shown that tungsten (W) and other refractory metals with body-centered cubic (bcc) structures exhibit certain novel behavior when their grain size, d, is refined into the ultrafine (UFG, 100 nm < d < 1000 nm) or nanocrystalline (NC, d < 100 nm) regime. For example, it has been shown that bcc refractory metals with such microstructures show decreased strain rate sensitivity besides their elevated strength and vanishing strain hardening response. Consequently, under both quasi-static and high-strain-rate loading, plastic instability in the form of shear banding becomes the dominant mode of plastic deformation. Such behavior is long sought-after in certain applications. However, due to the technology used to refine the grain size (primarily severe plastic deformation), the inability to scale the dimensions of the material may limit wider use and application of UFG/NC bcc refractory metals. In this work, the feasibility was demonstrated of production of large-scale W parts using a diffusion bonding method. The microstructure, preliminary mechanical properties, and issues and challenges associated with the fabrication procedures were examined and discussed. It is envisioned that diffusion bonding may serve as a promising technology for scaled-up fabrication of UFG bcc refractory metals for the targeted application.     

Influence of deposition parameters on surface morphology and application of CuInS2 thin films in solar cell and photocatalysis

Copper indium disulfide (CuInS₂) thin films as an absorption layer for solar cell and photocatalytic degradation of organic pollutants, were successfully electrodeposited on the FTO coated glass substrate using the simple and inexpensive electrodeposition method and a sulfurization process. The effects of the Cu/In molar ratio, annealing temperature and kind of Cu²⁺ precursor (Cu(salen) and Cu(acac)₂ as novel Cu²⁺ precursors) on the structural and morphological properties of samples were examined. The XRD diffraction patterns and energy dispersive spectroscopy measurements exhibit that high-quality film with superior crystalline structure was formed in the presence of Cu(salen) as Cu²⁺ precursor. Also, we found that a suitable heat treatment temperature could suppress the CuS phases and form well-crystallized CIS. As we know, this is the first reported efficiency for any CuInS₂ superstrate solar cell to date that fabricated using Cu(salen) as Cu²⁺ precursor. In addition, the photocatalytic degradation of organic dye in the presence of as-synthesized CuInS₂ thin films was studied. The as-prepared semiconductor photocatalysts have a good reusability; it can be successfully reused for 5 times recycling photoactivity tests.     

三相全控桥式整流电路实验装置的研制

介绍了开发三相全控桥式整流电路实验装置的背景;叙述了TC787芯片的内部结构、工作原理、特点及芯片的各个管脚的功能;详细介绍了该实验装置的触发电路的设计思路、设计结果和工作原理;介绍了该实验装置的主电路部分的结构和特点。该实验装置性能可靠,符合本科生实验要求。     

Global experience curves for wind farms

In order to forecast the technological development and cost of wind turbines and the production costs of wind electricity, frequent use is made of the so-called experience curve concept. Experience curves of wind turbines are generally based on data describing the development of national markets, which cause a number of problems when applied for global assessments. To analyze global wind energy price development more adequately, we compose a global experience curve. First, underlying factors for past and potential future price reductions of wind turbines are analyzed. Also possible implications and pitfalls when applying the experience curve methodology are assessed. Second, we present and discuss a new approach of establishing a global experience curve and thus a global progress ratio for the investment cost of wind farms. Results show that global progress ratios for wind farms may lie between 77% and 85% (with an average of 81%), which is significantly more optimistic than progress ratios applied in most current scenario studies and integrated assessment models. While the findings are based on a limited amount of data, they may indicate faster price reduction opportunities than so far assumed. With this global experience curve we aim to improve the reliability of describing the speed with which global costs of wind power may decline.     

三维地震勘探中强声波干扰的压制

在三维地震资料采集中产生的声波为非线性干扰波,能量强,频谱宽,利用常规的分频去噪和线性压噪方法难以将其去除,使后续的资料处理效果受到影响。基于声波具有非常稳定的传播速度这一特点,提出了一种利用非线性变换手段压制强声波干扰的方法。方法原理是,首先对三维地震资料中含声波到达时间的某段记录(时窗)进行转换,将非线性声波时距关系转换为速度趋于无穷、波数趋于零的一组噪声;然后应用f-k滤波对这组噪声进行压制;最后,再通过逆转换得到声波压制后的结果。该方法易于实现,并只对声波到达时间处的小范围数据进行处理,数据量小,计算效率高。对实际三维地震资料的处理结果表明,该方法压制强声波干扰的效果非常明显。     

An integrated system of biological and catalytic oxidation for the removal of o-xylene from exhaust

Biofiltration is an efficient technology for treatment of gaseous waste. Its disadvantages, however, include large volume of bioreactor and slow adaptation to fluctuating concentrations in waste gas. Catalytic oxidation offers a high destructive efficiency at relatively low operating temperature and small unit. A bench scale system integrated with a biofilter and a catalytic oxidation unit for the treatment of gases containing o-xylene was investigated in this study. The catalytic oxidation unit was packed with Cu/Al₂O₃ catalyst. The results showed that 90% of o-xylene could be removed in the biofilter at the load below 38.2 g m⁻³ h⁻¹. High o-xylene concentration in inlet gas resulted in an overload of the biofilter. Using the Cu/Al₂O₃ catalytic oxidation unit, the concentration of o-xylene could be reduced evidently. The combination of the chemical and microbial processes not only led to a high and stable efficiency of o-xylene conversion, but also improved capacity resisting the shock loads. The Cu/Al₂O₃ was studied for o-xylene oxidation in temperature range of 90–320 °C. The o-xylene conversion was improved correspondingly with the increasing of oxidation temperature. The reaction mechanism of o-xylene oxidation on Cu/Al₂O₃ was also investigated using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS).     

润滑油资源与环境

解释了资源及环境的概念,讨论了润滑油资源与环境的关系,评述了润滑油如何适应环境保护的要求.     

拉远基站与系统设备的互联互通

随着3G牌照发放日期的逐步临近,人们对第3代移动通信(3G)的认识也更加清晰.2G与3G将融合发展,平滑过渡.2G业务增长的数据显示,2G还有很大的发展空间,2G与3G的过渡将是一个长期的过程.3G将首先在一些热点地区、业务量大的地方优先使用,在开始的时候没有必要大规模铺网,只需采用一些拉远基站就可以解决这些地区的3G覆盖问题.文章从网络应用的角度论述了拉远基站在未来3G组网中的重要作用,分析了目前部署3G拉远基站可能存在的问题,对互联互通、站址和网管等问题的解决方法提出了建议.     

工程制图精品课程建设的探索与实践

论述了为培养高素质人才,全面提升高等教育教学质量,必须积极推进和实施工程制图精品课程建设及其建设目标。从加强师资队伍建设、教学内容与课程体系、教学方法与手段、教材与教学资源、实践教学、教学效果等方面探索了工程制图的教学改革和课程建设实践。总结了制图精品课程建设的特色和所取得的成果,并提出了进一步应探讨和研究的一些问题。     

主机数据流量检测的实现

分布式网络环境中主机数据流量的异常通常反映出主机是否遭受病毒、木马等恶意程序的入侵而成为网络攻击中的傀儡机,因此,对主机数据流量进行监测可以尽早发现潜在的危险。研究了基于Cisco路由器的主机数据流量检测的基本方法,并给出了具体的程序实现方法和网络硬件环境配置方法。