Effects of spinosad and spinetoram on larval mortality,adult emergence,progeny production and mating in Cadra cautella (Walk.) (Lepidoptera: Pyralidae)

The bacterial formulations, spinosad and spinetoram, were evaluated for their efficacy in suppressing development and mating success in Cadra cautella (Walk.) (Lepidoptera: Pyralidae), the almond moth. A dilution series of spinosad and spinetoram was sprayed on rice flour. Rice flour samples sprayed with water served as the control. Late instar C. cautella larvae were introduced onto spinosad-, spinetoram-, or water-treated rice flour. The first experiment tested the effects of spinosad and spinetoram on larval mortality, as well as emergence of adults and progeny at different insecticide concentrations. In the second experiment, the mating success of C. cautella adults that had emerged from larvae exposed to spinosad was tested inside a cubicle. Both spinosad and spinetoram increased larval mortality, whereas both compounds reduced adult emergence and progeny production. Natural mating was reduced in the presence of the synthetic sex pheromone (Z,E)-9,12-tetradecadienyl acetate. However, exposure of C. cautella larvae to spinosad did not alter mating in adult progeny. Spinosad was more effective than spinetoram at suppressing C. cautella development. The study concludes that both spinosad and spinetoram suppress the development of immatures of C. cautella to the adult stage as well as mating. Thus, the both compounds can be used to protect stored grains from infestation by C. cautella.     

Enhancing cation exchange capacity of chars through ozonation

The use of ozone to increase the cation exchange capacity (CEC) of two chars produced from pyrolysis of Douglas fir (Pseudotsuga menziessii) and a control bituminous coal activated carbon (AC) is reported. Chars were produced from the wood fraction of Douglas fir (DFWC) and the bark (DFBC) at 500 °C using an auger driven reactor with a nitrogen sweep gas under mild vacuum. Five ozone treatment times, ranging from 5 min to 60 min, were investigated. The initial properties of each char were found to differ significantly from the other samples in terms of surface area, proximate composition, and elemental composition. DFWC did not show significant mass loss or temperature variation during ozone treatment; however, after 1 h of oxidation both DFBC and AC samples resulted in 20% and 30% mass loss, respectively, and reactor temperatures in excess of 60 °C. Analysis of the pore size distribution of each treatment shows that ozone treatment did not significantly affect small micropores after 30 min of treatment for any material, but did reduce the apparent surface area of mesopores. Increases in carboxylic groups were identified with ozone treatment and found to correlate strongly with changes in measured CEC. The formation of lactone was found to correlate positively with reactor temperature during oxidation. These results indicate that the properties of chars, including surface area, pore structure, and chemical composition, as well as reactor conditions strongly affect the ozone oxidation of chars.     

Comparative evaluation of the mesophilic and thermophilic biohydrogen production at optimized conditions using tequila vinasses as substrate

The objective of this work was to comparatively evaluate the production of biohydrogen (bio-H₂) from tequila vinasses at optimized mesophilic and thermophilic conditions and to elucidate the main metabolic routes involved. Optimal temperatures of 35 °C and 55 °C, and pH of 5.5 maximized the bio-H₂ production rates, 25.5 ± 0.01 NmL h⁻¹ and 169.9 ± 8.9 NmL h⁻¹ in the mesophilic and thermophilic regimens, respectively. During the operation of anaerobic sequencing batch reactors, the thermophilic process allowed a volumetric bio-H₂ production rate of 519 ± 13 NmL-H₂ L⁻¹ d⁻¹ equivalent to 750 ± 19 NmL-H₂ L_vinasse⁻¹, while the mesophilic one 448 ± 23 NmL-H₂ L⁻¹ d⁻¹ and 647 ± 33 NmL-H₂ L_vinasse⁻¹, respectively. Furthermore, the gas produced under thermophilic conditions showed high hydrogen content (86.5%). Finally, formate degradation and glucose fermentation to acetic and butyric acids were the main metabolic routes involved in bio-H₂ production under thermophilic conditions, while at mesophilic conditions, the lactate and formate degradation pathways governed.     

Solid–liquid phase equilibria of binary indole mixtures with some aromatic compounds using a solid–liquid–vapor equation-of-state

The separation of useful chemicals, such as indole from coal tar, is an important subject of research in the field of fossil energy, renewable energy, and utilization of byproducts and waste materials. High-pressure crystallization is one of the proposed separation methods. To understand the process requires detailed knowledge of solid–liquid phase behaviors. Solid–liquid phase equilibrium data of various binary mixtures of indole have been reported in the literature. In the present report, we analyze some of the experimental data with our unified solid–liquid–vapor equation-of-state to see whether our model can be useful for the calculation of solid–liquid equilibria in these organic systems. Good correlations of the data and predictions of phase behavior, at very high pressures, are demonstrated.     

Deformation behaviour of iron-doped alumina

Compressive creep tests in air were carried out on 1 cat.% Fe-doped alumina at a temperature T=1400 °C. Iron doping affected the plastic deformation by different ways in relation with Fe²⁺ cations population. Fe²⁺ cations sped up the deformation rates. FeAl₂O₄ spinel precipitates were identified and they were found (i) to interact with alumina grain boundaries (ii) to limit the grain growth within a range of strain. The Fe²⁺ cations underwent oxidation and this resulted in the dissolution of the some precipitates and in the decrease of deformation rates. It was suggested that deformation sped up this evolution through mass transport and that time was not a dominating parameter.     

Desktop inkjet printer as a tool to print conducting polymers

In order to exploit mechanical flexibility of organic-based electronic devices, conducting polymer anodes, such as polyaniline or poly(3,4-ethylenedioxy)-thiophene-poly(styrene sulfonate) (PEDOT-PSS), have been extensively studied. Along with the use of solution based processing techniques, conducting polymers can simplify the device fabrication procedure and yield themselves easily to printing techniques. In this paper, we present the results of utilizing desktop inkjet printer as a tool for direct printing and patterning of conducting polymer. Design of printable patterns and adjustment of printing parameters can be performed using any software such as Power Point. PEDOT-PSS suspension can be loaded into an inkjet cartridge and deposited on a given substrate in any designed pattern. The gray-scale color scheme can be employed to control the layer thickness and sheet resistivity of the inkjet printed layers. These layers are then used as anodes in organic light-emitting devices (OLEDs).     

Evaluation of landscape and instream modeling to predict watershed nutrient yields

The project goal was to loosely couple the SWAT model and the QUAL2E model and compare their combined ability to predict total phosphorus (TP) and NO₃-N plus NO₂-N yields to the ability of the SWAT model with its completely coupled water quality components to predict TP and NO₃-N plus NO₂-N yields from War Eagle Creek watershed in Northwest Arkansas. Model predictions were compared using a statistical approach to identify significant differences between the two modeling methods. Results from two variations of the Pearson product-moment correlation (p < 0.05) indicated that correlation coefficients and regression slopes for the two data sets were not significantly different. This implies that neither modeling method was significantly better in predicting monthly TP and NO₃-N plus NO₂-N yields from the watershed. Additionally, no significant differences were present between predicted outputs of the SWAT model with instream components active compared with when instream components were inactive, indicating a need for further testing and refinement of the SWAT algorithms simulating instream processes. We can further infer that the instream processes available in SWAT may not be enhancing its predictive abilities as far as simulating instream components.     

Effect of heavy fuel oil/natural gas co-combustion on pollutant generation in retrofitted power plant

The purpose of this paper is to examine effect of co-combustion of heavy fuel oil and natural gas on the pollutant formation: CO₂, SO₂, SO₃, NO_X and soot. The analysis was carried out by means of numerical simulation on the case of retrofitted steam generator furnace of Thermal Power Plant Sisak (Croatia). Comprehensive mathematical model of the furnace with detailed 3D mesh was set up to include all relevant aerodynamic and thermo-chemical processes in the furnace. Dedicated model for SO₃ formation was developed earlier and used in this work. By increasing the natural gas contribution in overall fuel fired in the furnace, emissions of CO₂, SO₂, soot, NO_X and SO₃ decreased. Heat transferred to the furnace walls and temperature field in the furnace were also examined in order to establish regions of safe and efficient boiler operation for different operational regimes.     

Groundwater-surface water interactions and agricultural nutrient transport in a Great Lakes clay plain system

Nutrient export from agricultural land to surface waters is a significant environmental concern within the Great Lakes Basin (GLB). A field-based watershed-scale study was completed to investigate spatial and temporal variations of phosphorus and nitrate to assess nutrient transport pathways and groundwater-surface water interactions in an agriculturally dominated clay plain system. This was conducted in the 127 km² Upper Parkhill Watershed, near Lake Huron in southwestern Ontario, Canada. Data collection occurred from June 2018 to May 2019 via continuous sensor deployment and discrete sampling of stream water, groundwater, hyporheic zone, and tile drainage water. Samples were analyzed for various nutrient species (total, total dissolved, soluble reactive, and particulate phosphorus, and nitrate-N) to examine the hydrological dynamics of principal transport pathways of agriculturally-derived nutrients. Total phosphorus and nitrate concentrations in stream water ranged from 0.007 to 0.324 mg/L and 0.32 to 13.13 mg NO₃^?-N/L, respectively. Tile drainage water total phosphorous concentrations varied from 0.006 to 0.066 mg/L. Groundwater total dissolved phosphorus concentrations ranged from <0.003 to 0.085 mg/L. Transport of phosphorus through tile drainage was observed to be greater than through groundwater over the study period. No distinct relationship was observed between nutrient concentrations in the hyporheic zone and the vertical hydraulic gradient within this zone in the studied stream reach. Preliminary correlations were discerned between water quality observations and recognized land management practices. Given the elevated stream nutrient concentrations, these results are consequential for the continual improvement of strategies and programs devised to conserve water resources within the GLB.