Mechanical properties of graphene films enhanced by homo-telechelic functionalized polymer fillers via π–π stacking interactions

Most researches on graphene/polymer composites are focusing on improving the mechanical and electrical properties of polymers at low graphene content instead of paying attention to constructing graphene’s macroscopic structures. In current study the homo-telechelic functionalized polyethylene glycols (FPEGs) were tailored with π-orbital-rich groups (namely phenyl, pyrene and di-pyrene) via esterification reactions, which enhanced the interaction between polyethylene glycol (PEG) molecules and chemical reduced graphene oxide (RGO) sheets. The π–π stacking interactions between graphene sheets and π-orbital-rich groups endowed the composite films with enhanced tensile strength and tunable electrical conductivity. The formation of graphene network structure mediated by the FPEGs fillers via π–π stacking non-covalent interactions should account for the experimental results. The experimental investigations were also complemented with theoretical calculation using a density functional theory. Atomic force microscope (AFM), scanning electron microscope (SEM), X-ray diffraction (XRD), nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), UV–vis and fluorescence spectroscopy were used to monitor the step-wise preparation of graphene composite films.     

Modelling of heat transfer in an infiltrated granular bed in view of the difference of phase temperatures

Physically substantiated boundary conditions for problems of heat transfer in infiltrated granular beds based on the two-temperature model which allow for the absence of interphase heat transfer on boundaries are formulated. It is shown that classical Dankwerts conditions would be applicable for gas. The problem of porous cooling at the boundary conditions of the 2nd and 3rd kind on the outer boundary is solved in a new formulation.     

Efficient synthesis of benzophenone derivatives in Lewis acid ionic liquids

Benzophenone and its derivatives were prepared via Friedel–Crafts acylation reactions using ionic liquids (ILs) of BmimCl–FeCl₃, BmimCl–AlCl₃ and BmimCl–ZnCl₂ as dual catalyst–solvent. Among them, BmimCl–FeCl₃ showed much higher catalytic activity than that observed for the other two ILs, and in conventional organic solvents. In these reaction systems, good to excellent yields (up to 97%) of acylation products were obtained in a short reaction time. This method features high yield, a simple product isolation procedure, ILs reusability and reduced waste discharge, thus rendering this catalytic system both efficient and environmentally friendly.     

海洋经济运行监测系统的设计与实现

根据省级海洋经济运行监测能力建设的需要和对系统安全等级的要求,以JAVA为开发语言,以Oracle 11g为后台数据库,开发设计了海洋经济运行监测系统。介绍了该系统的设计思想、实现技术和其安全保障机制。该系统的实现,为沿海省份提供了一种快捷准确的海洋经济数据采集方案,提高了海洋经济运行监测能力,以期为地方海洋经济的发展提供更为科学、准确的数据支撑。     

Development of an index based on fish,macroinvertebrates, phytoplankton,and physicochemical properties to assess urban aquatic ecosystems in Jinan,China

Because of the rapid growth in urbanization over recent decades, urban aquatic ecosystems have been subjected to unprecedented threats and challenges. In this study, we visited 48 sites, of which 14 were reservoir sites, in water bodies in Jinan, China, on six occasions in May, August, and October of 2014 and 2015. We sampled fish, macroinvertebrates, and phytoplankton assemblages and physicochemical factors at each site. We used the richness and diversity of fish, macroinvertebrates, and phytoplankton to evaluate the condition of the aquatic ecosystems of the river sites. We also evaluated the water quality of the reservoir sites using the physicochemical factors of the State Environmental Protection Administration of China. We classified the results into five levels—excellent, good, moderate, poor, and bad—with the comprehensive evaluation index (CEI). More than 40% of the sampling sites were in either poor or bad condition. Nearly half of the excellent or good sites were in the south of Jinan. The CEI was significantly different between the reference and impaired sites; it was significantly and positively correlated with the qualitative habitat evaluation index and was significantly and negatively correlated with conductivity, total alkalinity, and ammonia nitrogen.     

适于水下船体的爬壁机器人关键技术及其研究进展

水下船体表面清刷和检测为爬壁机器人开辟了新的应用领域,其特点是机械本体稳定地吸附在水下船体表面上,同时能够灵活地完成移动、转向、越障等行走功能,进而完成针对船体表面的检测、清刷等作业。文中重点介绍了几种水下船体作业的爬壁爬行机器人,并对机器人的吸附和行走两个关键技术进行了分析,总结了水下船体作业机器人研究中的一些难点问题及其发展趋势。     

Carbon Black-Supported Single-Atom Co?N?C as an Efficient Oxygen Reduction Electrocatalyst for H2O2 Production in Acidic Media and Microbial Fuel Cell in Neutral Media

Single metal atom isolated in nitrogen-doped carbon materials (M N C) are effective electrocatalysts for oxygen reduction reaction (ORR), which produces H₂O₂ or H₂O via 2-electron or 4-electron process. However, most of M N C catalysts can only present high selectivity for one product, and the selectivity is usually regulated by complicated structure design. Herein, a carbon black-supported Co N C catalyst (CB@Co N C) is synthesized. Tunable 2-electron/4-electron behavior is realized on CB@Co-N-C by utilizing its H₂O₂ yield dependence on electrolyte pH and catalyst loading. In acidic media with low catalyst loading, CB@Co N C presents excellent mass activity and high selectivity for H₂O₂ production. In flow cell with gas diffusion electrode, a H₂O₂ production rate of 5.04 mol h⁻¹ g⁻¹ is achieved by CB@Co N C on electrolyte circulation mode, and a long-term H₂O₂ production of 200 h is demonstrated on electrolyte non-circulation mode. Meanwhile, CB@Co N C exhibits a dominant 4-electron ORR pathway with high activity and durability in pH neutral media with high catalyst loading. The microbial fuel cell using CB@Co N C as the cathode catalyst shows a peak power density close to that of benchmark Pt/C catalyst.     

Research Progress in the Application of Chinese Herbal Medicines in Aquaculture: A Review

Due to increasing safety concerns regarding human consumption of fish products, an increasing number of medicinal chemicals are prohibited from use in aquaculture. As a result, Chinese herbal medicines are being increasingly used, coining the use of the term “green medicine.” Research shows that Chinese herbal medicines have many beneficial effects on fish, including growth promotion, enhancement of disease resistance, and improvement in meat quality. Many effective ingredients have been discovered in Chinese herbal medicines, which function to promote feed intake, improve meat flavor, and increase digestive enzyme activity. They also regulate and participate in processes that improve the specific and non-specific immunity of fish; however, the composition of Chinese herbal medicines is very complex and it is often difficult to identify the effective ingredients. This article reviews the latest research and application progress in Chinese herbal medicines regarding growth and feed utilization, immunity and disease resistance, and the meat quality of cultured fish. It also discusses research on the chemical constituents of classical Chinese medicinal herbs and problems with the application of Chinese herbal medicines in fish culture. This article concludes by proposing that future studies on Chinese herbal medicines should focus on how to cheaply refine and extract the effective ingredients in classical Chinese medicinal herbs, as well as how to use them efficiently in aquaculture.     

Low-valence ion addition induced more compact passive films on nickel-copper nano-coatings

Ni-Cu nano-coatings were prepared by pulsed electroplating technique in the baths containing various amount of boric acid. Their microstructure, morphologies and corrosion resistance were characterized in detail. The addition of boric acid strongly influences on the microstructure of the Ni-Cu coatings. The coating with a grain size of 130 nm, obtained from the bath containing 35 g L⁻¹ boric acid, shows the highest corrosion resistance. This is attributed to the low-valence Cu ion (Cu⁺) additions in nickel oxide, which could significantly decrease the oxygen ion vacancy density in the passive film to form a more compact passive film. The higher Cu⁺ additions and the lower diffusivity of point defects (D₀) are responsible for the formation of more compact passive film on the coating obtained from the bath with 35 g L⁻¹ boric acid.