A hybrid homogeneously weighted moving average control chart for process monitoring: Discussion

The sensitivity of a monitoring scheme depends on many factors including the variance of the charting statistic which is very important in the computation of the control limits. This paper discusses the computation of the variance of the recently proposed hybrid homogeneously weighted moving average (HHWMA) $\overline{X}$ scheme which was based on an incorrect assumption. The correct variance is used to evaluate the run-length characteristics of the HHWMA $\overline{X}$ scheme. It is observed that the incorrect variance has a significant impact on the sensitivity (or performance) of the HHWMA $\overline{X}$ scheme.     

Mg0.5NixZn0.5-xFe2O4 spinel as a sustainable magnetic nano-photocatalyst with dopant driven band shifting and reduced recombination for visible and solar degradation of Reactive Blue-19

Focussing on visible light active ferrites for high performance removal of noxious pollutants, we report the synthesis of Mg_0.5Ni_xZn_0.5-xFe₂O₄ (x = 0.1, 0.2, 0.3, 0.4, & 0.5) ferrite nanoparticle for degradation of reactive blue-19 (RB-19). Lattice parameters calculated using intense X-ray diffraction (XRD) peaks and Nelson-Riley plots (N-R plot) are in well agreement with each other. The sample Mg_0.5Ni_0.4Zn_0.1Fe₂O₄ (M5N4) exhibits best performance with 99.5% RB-19 degradation in 90 min under visible light. Photoluminescence (PL) results confirm that recombination of charge carriers is highly reduced in the photocatalyst. Scavenging experiments suggest that O₂⁻ radicals were the dominant species responsible for photocatalytic performance. The photocatalytic mechanism was explained in terms of dopant driven shifting of conduction bands and valence bands (calculated by Mott-Schottky plots). The thermodynamic probability of radical generation along with role of redox cycles of metal ions has been discussed in the mechanism. The dye degradation was ascertained by detection of intermediates via mass spectrometry analysis and a possible degradation route was also predicted. The findings in this work provide intriguing opportunities to modify the electronic band structure of spinel ferrites for visible and solar light photocatalytic activity for environmental detoxification.     

Reality-based interaction affecting mental workload in virtual reality mental arithmetic training

ABSTRACT

The concept of digital game-based learning (DGBL) evolves rapidly together with technological enhancements of virtual reality (VR) and smart phones. However, the mental workload (MWL) that VR-training applications demand and motivational qualities originating from user experience (UX) should be identified in order to create effective and enjoyable training/learning challenges that fit with individual users’ capabilities. This study examined the effects of reality-based interaction (RBI) and VR on measures of student motivation and MWL, in a mental arithmetic game for secondary school pupils. In a randomised controlled trial with sixty school children, a mental arithmetic game was tested with three different interaction and two different presentation methods – VR RBI, VR head-mounted-display tapping and tablet flick-gesture. Results found a significant effect of RBI on MWL but no differences in enjoyment of training were found between VR-experience and tablet training-experience. In fact, adding the gaming-context to the mental arithmetic task created an enjoyable, motivating experience regardless of presentation or interaction-style.     

Strain hardening due to deformation twinning in α-titanium: Mechanisms

Novel experiments were conducted to elucidate the effect of deformation twinning on the mechanical response of high-purity α-titanium deformed at room temperature. Orientation-imaging microscopy (OIM), microhardness, and nanohardness evaluations were employed in conjunction with optical microscopy and quasi-static compression testing to obtain insight into the deformation mechanisms. Hardness measurements revealed that the newly formed deformation twins were harder than the matrix. This observation is perhaps the first experimental evidence for the Basinski mechanism for hardening associated with twinning, arising from the transition of glissile dislocations to a sessile configuration upon the lattice reorientation by twinning shear. This work also provided direct evidence for two competing effects of deformation twinning on the overall stress-strain response: (1) hardening via both a reduction of the effective slip length (Hall-Petch effect) and an increase in the hardness of twinned regions (Basinski mechanism) and (2) softening due to the lattice reorientation of the twinned regions.     

Evaluation of a finite element modelling approach for welded aluminium structures

Experimental and numerical studies were carried out to investigate the behaviour of quasi-statically loaded fillet-welded connections in aluminium alloy EN AW 6082. The components were designed so that fracture should occur in the heat-affected-zone (HAZ), which was also the case in the experiments. In the numerical study, the components were modelled in LS-DYNA using shell elements. A user-defined material model comprising the Barlat and Lian anisotropic yield criterion and a ductile fracture criterion was adopted. The strength and hardening data for the HAZ, weld and base material were taken from existing experimental data in the literature. The constants for the yield criterion were identified from uniaxial tensile tests by various methods, and the set of constants that best represents the measurements was adopted in the numerical analysis. Reasonable estimates on ductility were obtained by the simulations when a refined mesh was used, while the strength was somewhat over-predicted.     

ANN inverse analysis based on stochastic small-sample training set simulation

A new approach of inverse analysis is proposed to obtain parameters of a computational model in order to achieve the best agreement with experimental data. The inverse analysis is based on the coupling of a stochastic simulation and an artificial neural network (ANN). The identification parameters play the role of basic random variables with a scatter reflecting the physical range of potential values. A novelty of the approach is the utilization of the efficient small-sample simulation method Latin Hypercube Sampling (LHS) used for the stochastic preparation of the training set utilized in training the artificial neural network. Once the network has been trained, it represents an approximation consequently utilized to solve the key task: To provide the best possible set of model parameters for the given experimental data. The efficiency of the approach is shown using numerical examples from civil engineering computational mechanics.     

Fabrication and frequency response of a complex ultrasonic transducer for multilayer evaluation

To characterize the thickness of a corrosive fluid system's coated facilities, such as pipes, tubes, tanks, and structural members, a complex ultrasonic transducer capable of measuring multilayered parts was fabricated and the time and frequency responses were evaluated. The target transducer was constructed with two active dual elements made from tape-cast PbNb₂O₆ sheets and an additional thin-film active element made from sol–gel spin-coated Pb(Zr_0.52Ti_0.48)O₃ films. After adjusting the properties of each active element, a complex transducer was assembled after matching the impedance of each element and considering the minimal interference between the active layers. The impulse response of the assembled complex transducer shows excellent characteristics. Moreover, the assembled transducer's capability of accurately measuring the thickness assures that it can be directly applied to related industries.     

OPAH a model for optimal design of multipurpose small hydropower plants

The investment in small hydropower plants requires the analysis of hydrological, technical, operational, budgetary, economical and financial aspects. The analysis of each possible configuration demands the joint action of several technicians, consuming substantial time and money. During initial design of the project, simplified procedures are usually adopted which may compromise the quality of the base configuration.In this paper we will present a global overview of the OPAH model, which was developed to surpass these limitations. This global model performs the optimization of project configuration. This model uses non-linear programming optimization to analyze the multipurpose operation of the hydropower plant. It uses a numeric simulation model of unsteady flow under pressure to analyze the hydraulic circuit. It uses an economical and financial simulation model that takes in to account the project risk associated to hydrologic and market variability, the financial capacity of the investor and the fiscal aspects.     

Simulation of humidity control and greenhouse temperature tracking in a growth chamber using a passive air conditioning unit

In this paper, we define a dynamic discrete model of a passive air conditioning unit, without the more typical compression or absorption-refrigeration cycle. The unit is composed of heat exchangers, a positioning system and humid corrugated pads. The aim of the study was to follow the temperature in a greenhouse and to replicate it with a desired and stable relative humidity in a ventilated growth chamber. A control law, based on a quadratic criterion and dynamic programming, taking output error and energy consumption minimisation into account, was used to control the behaviour of the unit in spite of air intake disturbances. The results of the simulation indicate that the air conditioning unit can produce a variable climate in the growth chamber, with a wide range of relative humidity setpoints.