Use of La2O3 with 8YSZ as thermal barrier coating and its effect on thermal cycle behavior,microstructure, mechanical properties and performance of diesel engine operated by hydrogen-algae biodiesel blend

In this present work, the effect of lanthanum oxides (La₂O₃) on the thermal cycle behavior of TBC coatings and mechanical properties such as adhesion strength and microhardness of 8% Yttria Stabilized Zirconia (8YSZ) TBCs were investigated. CoNiCrAlY and aluminium alloy (Al–13%Si) were used as bond coat and substrate materials. 8YSZ and different wt % of La₂O₃ (10, 20, and 30%) top coatings were applied using the atmospheric plasma spray (APS) method. The thermal cycling test for TBC coated samples were conducted at 800 °C in the electric furnace. The XRD pattern shows that the La₂O₃ doped 8YSZ material transformed to cubic pyrochloric structured La₂Zr₂O₇ during thermal cycling. Further, the Taguchi-based grey relation analysis (GRA) method was applied to optimize the TBC coating parameters to achieve better mechanical properties such as adhesion strength and microhardness. And the optimized La₂O₃/8YSZ TBC coating was coated on CRDI engine combustion chamber components. The engine was tested with microalgae biodiesel and hydrogen, and the results were promising for the TBC-coated engine. The engine performance increased while using La₂O₃/8YSZ coated components, and the emissions from engine exhaust gas such as CO, HC, and smoke reduced considerably. It was found that there was no separation crack and spallation of the coating layer in the microstructure. Ultimately, the microstructural analysis of the optimized TBC coated piston sample after 50 h of running in the diesel engine confirmed that the developed coating had a superior thermal insulation effect and longer life.     

The improvement of the self-healing ability of MoSi2 coatings at 900–1200 °C by introducing SiB6

The brittleness of MoSi₂ ceramic and the thermal mismatch between MoSi₂ coating and C / C composite lead to brittle cracking of the coating at 900−1200 °C. This problem has been overcome in this studyby introducing submicron-SiB₆ into the coating. The pre-fabricated cracks and a kinetics model of hot-pressed SiB₆-MoSi₂ ceramic could quantitatively predict the glass growth and crack healing. As expected, enhancing temperature and SiB₆ content increased the growth rate of the borosilicate glass and the crack healing ability of MoSi₂ ceramic, which was ascribed to the lower oxidation activation energy and larger specific surface area of submicron-SiB₆. For the plasma sprayed coating, SiB₆ with submicron structure was benefit for cracking inhibition and formation of borosilicate glass during oxidation, reducing the oxygen permeability and the consumption of inner coating. Hence, the 15 % SiB₆-MoSi₂ coatings raised the protection times to 84 and 120 h at 900 and 1200 °C respectively, presenting favorable oxidation protective performance.     

Towards type-selective carbon nanotube growth at low substrate temperature via photo-thermal chemical vapour deposition

Carbon nanotubes have been intensively researched for electronic applications, driven by their excellent electronic properties, where the goals are control and reproducibility of growth, semiconducting/metallic type selectivity and maintaining high quality of carbon nanotubes, in a process that is temperature-compatible with the electronics. Photo-thermal chemical vapour deposition can achieve these goals and, through a thorough investigation of the parameter space, we achieve very high nanotube-quality and growth rates, and produce a phase-diagram that reveals distinct regions for growing semiconducting and metallic single-walled nanotubes, as well as multi-walled. Correlation with the carbon-catalyst phase diagram allows for the development of a novel growth model. We propose that the temperature-gradient induces carbon diffusivity-gradient across the catalyst to yield the high growth rate. This is attributed to the increase of α-iron of catalyst. The growth control demonstrated here allows for integration of the nanotube growth process by photo-thermal deposition into mainstream electronics manufacture.     

ZnIn2S4/In(OH)3 hollow microspheres fabricated by one-step l-cysteine-mediated hydrothermal growth for enhanced hydrogen production and MB degradation

An intervening barrier for photocatalytic water decomposition and pollutant degradation is the frustratingly quick recombination of e⁻ - h⁺ pairs. Delicate design of heterojunction photocatalysts by coupling the semiconductors at nanoscale with well-matched geometrical and electronic alignments is an effective strategy to ameliorate the charge separation. Here a facile and environment-friendly l-cysteine-assisted hydrothermal process under weakly alkaline conditions is demonstrated for the first time to fabricate ZnIn₂S₄/In(OH)₃ hollow microspheres with intimate contact, which are verified by XRD, SEM, (HR)TEM, XPS, N₂ adsorption-desorption, UV–Vis DRS and photoluminescence spectra. ZnIn₂S₄/In(OH)₃ heterostructure (L-cys/Zn²⁺ = 4, molar ratio) with a band-gap of 2.50 eV, demonstrates the best photocatalytic performance for water reduction and MB degradation under visible light, outperforming its counterparts (In(OH)₃ and ZnIn₂S₄). The excellent activity of ZnIn₂S₄/In(OH)₃ heterostructure arises from the intercrossed band-edge positions as well as the unique hollow structure with large surface area and wide pore-size distribution, which are beneficial for the efficient charge migration from bulk to surface as well as at the interface between ZnIn₂S₄ and In(OH)₃. This work provides an efficient and eco-friendly strategy for one-pot synthesis of heterostructured composites with intimate contact for photocatalytic application.     

Characterization of dynamic behavior of a spout-fluid bed with Shannon entropy analysis

Differential pressure fluctuation time series were obtained at different locations in a two-dimensional spout-fluid bed with a cross section of 300 × 30 mm and height 2000 mm. Shannon entropy analysis of differential pressure fluctuations was developed to characterize the dynamic behavior. Effects of two important operating parameters (spouting gas velocity and fluidizing gas flow rate) on the Shannon entropy were examined. It was demonstrated that a spout-fluid bed at a high spouting gas velocity or fluidizing gas flow rate was a deterministic chaos system since the Shannon entropies at all bed locations increased sharply and asymmetric unstable flows occurred. Shannon entropies were found to be significantly different at various bed locations. Shannon entropies of different flow regimes were distinct, so they were used to identify the flow regimes. The results show that the Shannon entropy helps to grasp the complex characteristics of dynamic behavior in spout-fluid beds.     

The combustion of kerosene: Experimental results and kinetic modelling using 1- to 3-component surrogate model fuels

The oxidation of kerosene Jet-A1 and that of n-decane have been studied experimentally in a jet-stirred reactor at atmospheric pressure and constant residence time, over the high temperature range 900–1300 K, and for variable equivalence ratio (0.5≤ϕ≤2). Concentration profiles of the reactants, stable intermediates, and final products have been obtained by probe sampling followed by on-line and off-line GC analyses. The oxidation of neat n-decane and of kerosene in these conditions was modeled using a detailed kinetic reaction mechanism (209 species and 1673 reactions, most of them reversible). The present model was successfully used to simulate the structure of a fuel-rich premixed n-decane–oxygen–nitrogen flame. In the modelling, kerosene was represented by four surrogate model fuels: 100% n-decane, n-decane-n-propylbenzene (74%/26% mol), n-decane-n-propylcyclohexane (74%/26% mol), and n-decane-n-propylbenzene-n-propylcyclohexane (74%/15%/11% mol). The 3-component model fuel was the most appropriate for simulating the JSR experiments. It was also successfully used to simulate the structure of a fuel-rich premixed kerosene–oxygen–nitrogen flame.     

Cascade fuzzy control for gas engine driven heat pump

In addition to absorption chillers, today’s gas cooling technology includes gas engine driven heat pump systems (GEHP) in a range of capacities and temperature capacities suitable for most commercial air conditioning and refrigeration applications. Much is expected from GEHPs as a product that would help satisfy the air conditioning system demand from medium and small sized buildings, restrict electric power demand peaks in summer and save energy in general. This article describes a kind of control strategy for a GEHP, a cascade fuzzy control. GEHPs have large and varying time constants and their dynamic modeling cannot be easily achieved. A cascade control strategy is effective for systems that have large time constants and disturbances, and a fuzzy control strategy is fit for a system that lacks an accurate model. This cascade fuzzy control structure brings together the best merits of fuzzy control and cascade control structures. The performance of the cascade fuzzy control is compared to that of a cascade PI (proportional and integral) control strategy, and it is shown by example that the cascade fuzzy control strategy gives a better performance, reduced reaction time and smaller overshoot temperature.