The effects of washing a collagen sample prior to TEM examination

Transmission electron microscopy (TEM) is an important analysis technique to visualize (bio)macromolecules and their assemblies, including collagen fibers. Many protocols for TEM sample preparation of collagen involve one or more washing steps to remove excess salts from the dispersion that could hamper analysis when dried on a TEM grid. Such protocols are not standardized and washing times as well as washing solvents vary from procedure to procedure, with each research group typically having their own protocol. Here, we investigate the influence of washing with water, ethanol, but also methanol and 2-propanol, for both mineralized and unmineralized collagen samples via a protocol based on centrifugation. Washing with water maintains the hydrated collagen structure and the characteristic banding pattern can be clearly observed. Conversely, washing with ethanol results in dehydration of the fibrils, often leading to aggregation of the fibers and a less obvious banding pattern, already within 1 min of ethanol exposure. As we show, this process is fully reversible. Similar observations were made for methanol and propanol. Based on these results, a standardized washing protocol for collagenous samples is proposed.     

Lanthanide-organic-frameworks modified ZnIn2S4 for boosting hydrogen generation under UV–Vis and visible light

Novel Ln-MOF with microrods shape were successfully combined with ZnIn₂S₄ (ZIS) microsphere and used for photocatalytic hydrogen generation under UV–Vis and visible light. The Ln-MOFs/ZIS system comprises lanthanide-carboxylate coordination networks (Tm and Gd as metal ions, and 1,3,5-benzenetricarboxylic acid (BTC) as the organic linker) deposited on ZnIn₂S₄ microspheres. Effect of the amount of ((Tm,Gd)-BTC) (1, 5, 10 wt%) on the optical properties and photocatalytic hydrogen evolution performance was investigated. ZIS microsphere shows the marigold flower-like morphology and hexagonal polytopic crystal form. Our results proved that the combination of ZIS microsphere, Ln-MOF and Pt nanoparticles (NPs) caused significant enhancement in hydrogen generation. Amount of formed hydrogen was raised from 196.3 to 7782.1 μmol g^?1 for pristine ZIS and ZIS decorated with 1% (Tm, Gd)-BTC/Pt under UV–Vis light, respectively.     

Morphology-controlled fabrication of nanostructured WO3 thin films by magnetron sputtering with glancing angle deposition for enhanced efficiency photo-electrochemical water splitting

Herein, the tungsten trioxide (WO₃) nanostructure thin films with different morphologies are firstly fabricated by magnetron sputtering with glancing angle deposition technique (MS-GLAD), followed by the post annealed treatment process in air ambient for 2 h. It is demonstrated that the geometry of MS-GLAD setup, mainly substrate position, played a crucial role in determining the morphology, crystallinity, optical transmittance, and photo-electrochemical (PEC) performance of the WO₃ nanostructured thin film. With the different substrate positions in the MS-GLAD system, the WO₃ nanorod film layer could be precisely changed to combine an underlying dense layer with a nanorod layer and then nanocolumnar film. Moreover, the prepared samples' chemical composition and work function are studied by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS), respectively. The combining WO₃ nanostructure produced high PEC efficiency compared to the single layer of the WO₃ nanorods sample and the dense WO₃ thin film sample. Thus, morphology-controlled nanostructure film based on the MS-GLAD technique in our study provides a simple approach to enhance the photo-anode for PEC water splitting application.     

Synthesis of magnetically recoverable ferrite (MFe2O4, M Co,Ni and Fe)-supported TiO2 photocatalysts for decolorization of methylene blue

Effects of ferrite materials as supports (CoFe₂O₄, NiFe₂O₄, and Fe₃O₄) on nano-TiO₂ were elucidated by their use in the oxidation of methylene blue. These photocatalysts, which were synthesized by co-precipitation, were characterized by XRD, SEM, EDS and VSM. The crystalline phase of TiO₂ onto magnetic MFe₂O₄ was formed by anatase and rutile. TiO₂/CoFe₂O₄ exhibited the strongest magnetic property of the prepared catalysts, and the photocatalytic efficiencies followed the order TiO₂/CoFe₂O₄ > TiO₂/NiFe₂O₄ > TiO₂/Fe₃O₄. MB decolorization was enhanced with the amount of TiO₂ on the photocatalyst, and was moderately affected by the extent of structural distortion of ferrite supports.     

Relationships between the accumulative damage and dielectric properties of woven BN-coated Hi-Nicalon™ SiC fibre-reinforced SiC matrix composites

The accumulative damage behaviour of BN-coated Hi-Nicalon™ SiC fibre-reinforced SiC matrix composite was examined under tensile cyclic loading at room and elevated temperatures. The accumulative damage occurring during the cyclic loading was quantitatively characterised using the damage parameter obtained by the hysteresis loop curves. The damage parameter increased with increasing applied stress beyond the matrix cracking stress, and it subsequently retained a nearly constant value until just before fracture. Moreover, the dielectric constant, dielectric loss and loss tangent of the composite were measured before and after the fracture in the frequency range 1–1000 MHz. The dielectric properties had similar frequency dependency before and after the fracture. However, the dielectric constant, dielectric loss and loss tangent were lower in the post-fractured specimens than in the pristine ones. The reduction of the dielectric properties was associated with the accumulative damage stored in the specimens. In addition, the relationships between the dielectric properties and the damage parameter were described in detail.     

Formation of high-density scintillation ceramic from LuAG:Ce + Lu2O3 powders obtained by co-precipitation method

The results of formation of the high density effective scintillation ceramics consisting of two compounds of the cubic symmetry, LuAG:Ce and Lu₂O₃ (LuAG:Ce + Lu₂O₃), are described. Powders of a novel material LuAG:Ce + Lu₂O₃ were synthesized by co-precipitation method. The introduction of Lu₂O₃ into LuAG:Ce was shown to increase the density of the ceramics obtained and modify its scintillation properties.     

Diffusion behavior of dextrans in dairy systems of different microstructures

The diffusion of solutes through milk and milk-derived media (i.e. dairy systems) is an important factor in the transformation and stabilization of dairy products. In several polymer systems, the diffusion of solutes largely depends on the microstructure within the material. The aim of this work was to establish how the diffusion of solutes is affected by the microstructure of dairy systems. Diffusion measurements were carried out using the technique of fluorescence recovery after photobleaching (FRAP). Diffusion coefficients of a range of 8 fluorescein isothiocyanate (FITC)–dextrans (molecular weights from 4 to 2000 kDa) were measured in dairy systems. These systems had the same casein concentration (130 g kg^− 1) and water activity but their microstructure had been altered by different treatments: heat-treatment and rennet-induced coagulation. Microstructural parameters of these systems were estimated by the image analysis of transmission electron microscopy (TEM) micrographs. The results showed that the diffusion of solutes was affected by the microstructure of dairy systems. The application of heat-treatment hindered the diffusion of all solutes (irrespective of molecular weight), whereas rennet coagulation only increased the diffusion of the larger solute molecules (> 20 kDa). At the microscopic scale, the diffusion of solutes in dairy systems was mainly explained by both the pore size within the structure and by the interface area between the solute molecules and the surrounding matrix. Larger solutes diffused faster in dairy systems with larger pore sizes and less interface area.