Sub-surface stress measurement of cross welds in a dissimilar welded pressure vessel

Manufacturing process of pressure vessels used in high-temperature applications normally needs employing dissimilar metal welds (DMWs) between austenitic and ferritic steel. However, high amount of thermal stresses at the welds are induced due to differences in coefficient of thermal expansion between the types of steel. This study investigates the evaluation of welding residual stresses in a pressure vessel manufactured by DMW of 316 L stainless steel shell to A106 carbon steel caps as well as similar welding of stainless steel shells. By using longitudinal critically refracted (LCR) ultrasonic waves, the residual stresses are experimentally measured. The ultrasonic method is based on acoustoelasticity law by which the ultrasonic wave velocity could be connected to the material stress. By changing the frequency in which the ultrasonic transducers are working, the LCR waves are able to penetrate in various depths of the material in order to measure the sub-surface residual stresses. Hence, four main aspects are considered in this study: (I) stress evaluation of the DMW; (II) sub-surface stress measurement; (III) stress evaluation of longitudinal weld and (IV) stress measurement in cross weld. It is demonstrated that the residual stresses of the DMW pressure vessel could be comprehensively evaluated by using the LCR method.     

INDIRECT ACCELERATED ADAPTIVE FUZZY CONTROLLER

According to a type of normal nonlinear system, an indirect adaptive fuzzy （IAF） controller has been applied to those systems where no accurate mathematical models of the systems under control are available. To satisfy with system performance, an indirect accelerated adaptive fuzzy （IAAF） controller is proposed, and its general form is presented. The general form IAAF controller ensures necessary control criteria and system＇s global stability using Lyapunov Theorem. It has been proved that the close-loop system error converges to a small neighborhood of equilibrium point. The optimal IAAF controller is derived to guarantee the process＇s shortest settling time. Simulation results indicate the IAAF controller make the system more stable, accurate, and fast.     

低碳微合金钢中的晶内铁素体及组织控制

回顾和评述了晶内铁素体的发现、发展及其与组织控制的关系.介绍了晶内铁素体的形核机制和影响晶内铁素体形成的因素,讨论了晶内铁素体的三维形态和长大动力学,并从以上几方面分析了晶内铁素体对低碳微合金钢组织细化的重要作用和影响.     

The Transformation of Carbides during Austenization and Its Effect on the Wear Resistance of High Speed Steel Rolls

The transformation of carbides with austenization time of a high speed steel (HSS) roll material, manufactured by a centrifugal casting method, has been studied. The correlation between wear resistance and the type, morphology, volume fraction, and distribution of the carbides has also been investigated. Microstructural observations, X-ray diffraction (XRD) analysis, hardness measurements, and energy dispersive spectroscopy (EDS) have been used to characterize the carbides. The type and volume fraction of carbides were found to change with austenizing time. During austenization, the transformation of the M₃C carbides can be postulated as M₃C + γ-Fe → M₂C, with much finer nodular and rodlike MC carbides also forming through a solid-state transformation. The M₂C carbide decomposes as M₂C + γ-Fe → MC + M₇C₃ + M₆C. The decomposed carbide substantially maintains a platelike shape until the end of decomposition. The most important finding of this study is that austenization results in changes in the type, morphology, volume fraction, and distribution of carbides and that it can be controlled to produced a homogeneous distribution of hard carbides, resulting in an improvement in the wear resistance of HSS rolls. This finding may be of great use for the industrial production of HSS rolls.     

喷射共沉积SiCp／6066A1复合材料的组织性能增强颗粒捕获机制

研究了喷射共沉积SiCp/6066Al基复合材料增强颗粒的捕获机制，以及复合材料在加工过程中组织、性能的变化。结果表明：喷射沉积过程中，平均粒度为10μm的SiCp颗粒基本上可以被6066铝合金完全捕获；复合材料平行挤压方向轧制的致密度和强度高于垂直挤压方向轧制的，平行轧向的强度高于垂直轧向的。     

碱金属和锌对高炉用SiAlON结合刚玉砖的复合侵蚀

将高炉用SiAlON结合刚玉砖制成外部尺寸为50mm×50mm,内孔尺寸为25mm×25mm的坩埚,分别加入由Na2CO3、K2CO3、ZnO和宝钢高炉现场高炉灰配制的炉渣(其w(Na2O+K2O)=2.75%,w(ZnO)=5.1%)和用K2CO3、ZnO、石墨配制的炉渣(其w(Na2O+K2O)=25%,w(ZnO)=25%),然后分别在还原气氛下于1350℃16h和1100℃40h进行侵蚀试验。将侵蚀后的试样纵向对称剖开,观察渣对试样的侵蚀和渗透情况,进行SEM和EDAX分析。结果表明:碱金属和锌含量不同的两种炉渣对SiAlON结合刚玉砖的侵蚀速度都很小;碱金属侵蚀机理主要是SiAlON与碱蒸气反应生成钾霞石,与渣反应生成铁橄榄石,并参与硅酸盐玻璃相的生成;刚玉颗粒与渣中的FeO、Na2O和K2O反应生成铁铝尖晶石和少量针状β-Al2O3;锌对该砖没有产生明显的化学侵蚀。     

钢包粘渣与包衬耐火材料

阐明了钢包粘渣与包衬耐火材料存在一定的关系 ,抗渣渗透性差、容易出现开裂的包衬耐火材料容易粘渣。为防止钢包粘渣 ,适于采用抗侵蚀性和抗渣渗透性优良的尖晶石砖、铝尖晶石 (或铝镁 )浇注料、低密度浇注料以及抗剥落性好的刚玉 -锆英石浇注料作包衬耐火材料     

基础项目融资中政府担保的定价

在基础项目融资中,政府提供的担保有效地促进了基础项目融资的发展.政府提供担保会给政府造成或有债务,需要采用定量方法研究担保,从而为政府的担保提供量化依据.论文在分析担保期权特性基础上,采用期权理论建立了担保的定价模型,并研究了模型在基础项目融资收益担保中的应用.     

竖炉生产直接还原铁过程的数值模拟

采用基于气相和固相的质量和能量的竖炉一球团（块矿）法直接还原炼铁的一维数学模型．含铁原料的还原采用三界面未反应核模型,并考虑了热量损失,得到了各物质的组成和温度在炉内的分布．以Gilmore厂Midrex作为对象进行模拟,模型结果与生产数据相符,验证了模型的准确性．模拟结果表明：Midrex竖炉的绝大部分区域内气利和固相的温度基本保持在还原煤气的入口温度．对高度为9．75m的Midrex竖炉,炉内绝大部分为浮氏体的还原,含铁原料运行约0．5m即可完全变成磁铁矿,运行约2m即可完全变成浮氏体．在竖炉7．0～9．75m深度范围内,随着还原气的上行,H2的体积分数迅速减少,而CO的体积分数变化不大．在竖炉2．0—7．0m深度范围内,H2和CO的体积分数缓慢降低,在竖炉0～2．0m深度范围内,H2和CO的体积分数显著降低．