Development of a rapid crosslinking preceramic polymer system

A low-viscosity, fast crosslinking preceramic polymer system was developed as a base for liquid state processing. The system consists of a water-crosslinkable silicone polymer, a latent water source for in situ water generation, and a tin catalyst. While the silicone polymer and the water source can be mixed in any proportion, the catalyst must be added separately to achieve crosslinking at room temperature within a short time. By pyrolysis in inert atmosphere at 1000 °C the system was shown to have a high ceramic yield of ∼54 wt.%. The base system is compatible with alkanes, which makes it suitable for viscosity control when the system is filler-loaded for tailoring of properties. Due to its low viscosity one possible use of the system is in inkjet printing. Further since the crosslinking is rapid it can also be used in the layer by layer manufacturing of ceramic parts.     

An in situ TEM study of phase formation in gold-aluminum couples

In the gold wire bonding of aluminum in microelectronic devices the presence of aluminum oxide on the metallization surface may be expected. Electron transparent couples containing an oxide layer at the interface were heated in a TEM to determine the effects of a passivation layer on intermetallic formation. Intermetallic phases were evidenced by changes in sample appearance and their structure was determined by electron diffraction. The presence of an oxide at the interface hindered second phase formation at temperatures at which they were usually expected to form. In aluminum rich couples, the formation of the AuAl₂ intermetallic was not observed to form until about 350°C with the oxide present. In a reverse configuration involving a gold rich couple, an amorphous oxide phase was observed between the Al and the advancing Au₂Al front. The movement of the reaction front appeared to be controlled by surface diffusion across this phase.     

Real faces and robot faces: The effects of representation on computer-mediated communication

While there is much research regarding audio, video and text based communication, there has been little work concerning how users communicate via avatars—that is graphical embodiments of remote users. The aim of this study was to explore the effects of different forms of representation, by examining how users communicate via high quality video images and basic graphical representations in different communicative contexts. Communication analysis revealed that video images facilitate turn-taking, although they are not necessarily perceived very differently from basic avatars in terms of questionnaire responses. Using eye-tracking techniques, we found that while participants generally gaze more often at video images, this is dependent on the communicative context and is not necessarily an advantage in a problem-solving situation. This study has demonstrated the value of employing various measures and tasks in order to evaluate computer-mediated interactions. The results have implications for the use of video and graphical representations in computer mediated communication and suggest that the benefits of video must be considered in relation to the user's requirements (e.g. communication process versus outcome) and context in which the system is to be applied (e.g. problem-solving or social).     

Second-order accurate constraint formulation for subdivision finite element simulation of thin shells

We present a new method for enforcing boundary conditions within subdivision finite element simulations of thin shells. The proposed framework is demonstrated to be second-order accurate with respect to increasing refinement in the displacement and energy norm for simply supported, clamped, free and symmetric boundary conditions. Second-order accuracy on the boundary is consistent with the accuracy of subdivision-based approaches for the interior of a body. Our proposed framework is applicable to both triangular and quadrilateral refinement schemes, and does not impose any topological requirements upon the underlying subdivision control mesh. Several examples from an obstacle course of benchmark problems are used to demonstrate the convergence of the scheme. Copyright © 2004 John Wiley & Sons, Ltd.     

Delayed failure of ceramic matrix composites in tension at elevated temperatures

Ultimate tensile strength of five different continuous fiber-reinforced ceramic matrix composites (CMCs), including SiC_f/BSAS (two dimensional (2D), 2 types), SiC_f/MAS (2D), SiC_f/SiC (2D), and C_f/SiC (2D, 2 types), was determined as a function of test rate at 1100–1200 °C in air. All five CMCs exhibited a significant dependency of ultimate tensile strength on test rate such that the ultimate tensile strength decreased with decreasing test rate. The dependency of ultimate tensile strength on test rate, the applicability of preload technique, and the predictability of life from one loading configuration (constant stress-rate loading) to another (constant stress loading) all suggested that the overall, phenomenological delayed failure of the CMCs would be governed by a power-law type of slow crack growth.     

A site selection model for high technology manufacturing firms in the United States

This article offers a quantitative model for site selection by high technology manufacturing firms. In the past, site selection studies have usually been qualitative in nature, and very subjective. This is an attempt to introduce a more objective quantitative approach. The site selection factors most important to high technology manufacturing firms were identified, ranked and weighted based on a US Joint Economic Committe survey of such firms. The eight most important factors were: the availability of technical and professional workers, labor costs, tax climate, academic institutions, cost of living, transportation for people, and access to markets. Demographic data on these factors were collected and analyzed for 32 developing high technology areas in the United States. By using the quantitative model, a score was developed for each area, allowing them to be ranked as R & D manufacturing environments. This model should prove a useful tool for both regional planners and high-tech companies seeking to relocate.     

On the mechanics of large inelastic deformations: noncoaxiality,axial effects in torsion and localization

Summary The macroscopic behavior of materials subjected to large deformations is investigated by considering the structure and mechanics of the single slip. Physically based constitutive relations for the plastic flow and material spin are then rigorously derived by resorting to the concept of non-coaxiality; yielding a class of vertex-type plasticity models incorporating features like noncoaxiality and large material rotation. It is shown that these phenomena are inherently coupled through the concept of plastic spin as it relates to the persistence of noncoaxiality. The implication of such phenomena to large deformations is investigated by examining their influence on the development of axial effects accompanying finite shear deformation, as well as on the onset of localized shear bands.     

The pickup and delivery problem: Faces and branch-and-cut algorithm

This paper formulates the pickup and delivery problem, also known as the dial-a-ride problem, as an integer program. Its polyhedral structure is explored and four classes of valid inequalities developed. The results of a branch-and-cut algorithm based on these constraints are presented.     

Inefficiency of lactation in primiparous rats: the costs of first reproduction

To investigate the energetic costs of lactation in a female mammal in relation to previous reproductive history, we compared the performance of adult female Long-Evans rats that had previously bred (multiparous) with young females that had not previously given birth (primiparous). All litters were standardized to 10 +/- 1 young. We compared maternal production (growth of pups), body mass, and energy intake (food consumption) of mothers, as well as their energy expenditure (resting oxygen consumption). The mass of litters at birth and the growth of pups during lactation did not differ according to reproductive history of the mothers. The body mass of primiparous mothers was less than that of multiparous mothers, and primiparous mothers showed an increase in mass during early lactation. To accomplish the essentially identical production of offspring under these circumstances, the primiparous mothers consumed and expended more energy than the multiparous mothers. This remarkable performance of first-time mothers results in an overall efficiency of energy allocation to reproduction amounting to only 25%, compared with 38% in multiparous mothers. The energetic inefficiency of primiparous female lactation results largely from the excessive expenditures associated with physiological and behavioral performances of first-time reproduction, together with a small component of additional expenditure due to further growth by the primiparous mothers. We suggest that this inefficiency probably contributes to the observed low reproductive success of novice breeders; furthermore, active restraint of fecundity may be an evolutionary response to the constraints of the energetic inefficiency of primiparous breeding by female mammals.