不同类型在役抽油机机架受力分析

通过现场测试和检查,对油田特定区域内经过优化后的各种不同类型抽油机在额定载荷下的支架以及连杆受力情况进行了分析和评价。为在油田范围内进行机采设备的选型和推广提供一些参考。     

碳纳米管/ABS树脂基复合材料的力学性能和雷达波吸收性能的研究

采用竖式炉流动法制备的碳纳米管经液相阳极氧化表面处理后增强ABS热塑性工程塑料。复合材料的力学性能研究显示:碳纳米管的加入有效提高了复合材料的拉伸性能,但材料的耐冲击性能下降。当碳纳米管含量为12 wt%时,复合材料的拉伸强度由45.00 MPa提高到69.96 MPa,杨氏模量由0.75 GPa提高到1.93 GPa。对碳纳米管/ABS复合材料的反射系数测定表明:复合材料在一定频率范围内有雷达波吸收性能。     

The combustion of kerosene: Experimental results and kinetic modelling using 1- to 3-component surrogate model fuels

The oxidation of kerosene Jet-A1 and that of n-decane have been studied experimentally in a jet-stirred reactor at atmospheric pressure and constant residence time, over the high temperature range 900–1300 K, and for variable equivalence ratio (0.5≤ϕ≤2). Concentration profiles of the reactants, stable intermediates, and final products have been obtained by probe sampling followed by on-line and off-line GC analyses. The oxidation of neat n-decane and of kerosene in these conditions was modeled using a detailed kinetic reaction mechanism (209 species and 1673 reactions, most of them reversible). The present model was successfully used to simulate the structure of a fuel-rich premixed n-decane–oxygen–nitrogen flame. In the modelling, kerosene was represented by four surrogate model fuels: 100% n-decane, n-decane-n-propylbenzene (74%/26% mol), n-decane-n-propylcyclohexane (74%/26% mol), and n-decane-n-propylbenzene-n-propylcyclohexane (74%/15%/11% mol). The 3-component model fuel was the most appropriate for simulating the JSR experiments. It was also successfully used to simulate the structure of a fuel-rich premixed kerosene–oxygen–nitrogen flame.     

Ionic liquid–polymer gel electrolytes based on morpholinium salt and PVdF(HFP) copolymer

New ionic liquid–polymer gel electrolytes (IPGEs) are prepared from N-ethyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide (Mor_1,2TFSI) and poly(vinylidene fluoride)-hexafluoropropylene copolymer (PVdF(HFP)). To investigate the effect of propylene carbonate (PC) on the ionic conductivity of the IPGEs, the preparation methods are roughly divided into two groups according to the presence or absence of PC. The ionic conductivity for each IPGE is measured with increasing temperature and changing weight ratio of Mor_1,2TFSI. The results show that the ionic conductivity increases as the temperature and weight ratio of the Mor_1,2TFSI increase, and that the added PC improves the ionic conductivity of the IPGEs. In addition, thermogravimetric analysis and the data from infrared spectroscopy demonstrate the thermal stability of each IPGE and the presence of PC in the polymer network. Although the IPGEs that contain PC display high conductivity (∼1.1 × 10⁻² S cm⁻¹) at 60 °C, they are thermally unstable.     

Development of a small DMFC bipolar plate stack for portable applications

The direct methanol fuel cell (DMFC) is regarded as a promising candidate in portable electronic power applications. Bipolar plate stacks were systematically studied by controlling the operating conditions, and by adjusting the stack structure design parameters, to develop more commercial DMFCs. The findings indicate that the peak power of the stack is influenced more strongly by the flow rate of air than by that of the methanol solution. Notably, the stack performance remains constant even as the channel depth is decreased from 1.0 to 0.6 mm, without loss of the performance in each cell. Furthermore, the specific power density of the stack was increased greatly from ∼60 to ∼100 W l⁻¹ for stacks of 10 and 18 cells, respectively. The current status of the work indicates that the power output of an 18-cell short stack reaches 33 W in air at 70 °C. The outer dimensions of this 18-cell short stack are only 80 mm × 80 mm × 51 mm, which are suitable for practical applications in 10–20 W DMFC portable systems.     

Towards a more efficient energy use in photovoltaic powered products

This paper analyzes the energy saving and power management solutions necessary to improve the energy consumption efficiency in photovoltaic powered products. Important in the design of such products is not only the energy supply optimization required to deliver the actual energy to fulfil their function, but also efficient energy transfer along the energy chain. In this paper, several methods to improve the efficiency of the energy chain are described. This includes an analysis of optimization methods for photovoltaic powered products, its functional system and product use.     

Thermal and mechanical properties of epoxy composites reinforced by a natural hydrophobic sand

If a low weight percentage of crude fine fillers can improve properties of polymer materials directly without complicated chemical treatment process involved, it will be significant for many industrial applications. Our previous study indicated that a kind of Cancun natural sand could be an effective filler material for polymer composites. In this current work, the epoxy composites reinforced by this kind of natural sand particles were prepared and thermal and mechanical properties of the composites containing up to 5 wt % of the sand particles were characterized. Results showed that the highest flexural strength appears in the epoxy composite containing 1 wt % sand particles. A damage model was used to interpret the flexural properties, which showed an acceptable agreement with the experimental results. The glass transition temperature, high temperature storage modulus, and dimensional stability of the sand/epoxy composites monotonically increased with the addition of the sand particles. The sand particle/epoxy composites also displayed a noticeable enhancement in thermal conductivity. Theoretical analysis showed that in addition to conduction, other heat transport mechanisms played roles in the improved heat transmission through the composites. As a natural porous micron-scale material, Cancun sand has the potential for applications in cost-effective composites with enhanced mechanical and thermal properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Pitting corrosion resistance of La added 316L stainless steel in simulated body fluids

Lanthanum (La), a rare earth element with anticoagulative and antiphlogistic function, was added into the medical grade 316L stainless steel in order to improve its biocompatibility. The corrosion resistance of the La added 316L steel in two different simulated body fluids, simulated blood plasma and Hank's solution, was evaluated. The result showed that the addition of La in the steel could largely affect the corrosion behavior of the steel. The steel with 0.01% La showed the widest passive region and the best resistance to pitting attack, within the addition range of La from 0.01% to 0.08%. The corrosion resistance improvement of La added 316L stainless steel is probably due to the effect of La on the purification of the steel, the modification of inclusions, and the passive film formation in the simulated body fluids.