含能材料锥形双螺杆安全混合径向间隙的研究

以锥形双螺杆挤出机挤出段、过渡体和挤出机头为研究对象,基于Polyflow非等温稳态和瞬态的有限元模拟,对不同径向间隙下流场中各场量分布情况和变化曲线进行分析,研究含能材料在挤出段、过渡体和挤出机头流道中的安全和混合问题。从安全和混合效果两方面考虑,建立了综合评价方法,优选径向间隙。结果表明,最大剪切速率、最高剪切应力和最高黏性耗散热均在挤出段流道入口附近,最高压力在挤出段流道出口处,最高温度在机头处;锥形双螺杆的混合效果随着间隙的增加而增加;在径向间隙为0.5 mm时,流道的安全性能最差,径向间隙为1 mm时,流道的安全性能最好。     

Effects of PSMA and experimental conditions on the morphologies of BaCO3 whiskers

BaCO3 whiskers exhibiting different morphologies were fabricated by a simple precipitation reaction of barium ch/oride with sodium carbonate in the absence and presence of poly-（styrene-alt-maleic acid） （PSMA） as a crystal growth modifier at room temperature. The as-prepared products were characterized by scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and X-ray diffraction （XRD）. The influences of experimental parameters on the size and morphology of BaCO3 whiskers were investigated and discussed. It was found that the as-prepared BaCO3 whiskers are single crystals with diameter ranging from 100 to 300 run, and grow along the crystallographic a-axis or [100] direction. BaCO3 whiskers with different morphologies, such as branching and dendritic structure, can be obtained depending on the experimental conditions. With increasing PSMA concentration, the diameter of BaCO3 whiskers decreases.     

Photocatalytic oxidation activity of titanium dioxide film enhanced by Mn non-uniform doping

1 Introduction Heterogeneous photocatalysis is an effective technique for reducing the concentration of pollutants at low concentration. It has been demonstrated that almost all organics can be oxidized to generate carbon dioxide, water and simple mineral…     

Effects of ZrO2 on the structure and magnetic properties of CoPt thin films

[CoPt 1.5 ml/ZrO2 xnm]10 multilayer films were deposited on glass substrates by magnetron sputtering and then annealed in vacuum at 600℃ for 30 min. Their structures and magnetic properties were investigated as a function of ZrO2 content. The results show that the grain size and coercivity first increase and then decrease with the increase in ZrO2 content. The maximum coercivity and grain size are obtained at 37 vol.% of ZrO2. The content of ZrO2 in the film plays an important role in the separation of CoPt grains and in the reduction of intergrain exchange interaction. On the basis of the studies of angular dependent coercivity, it is found that the magnetization reversal of CoPt films with （111 ） texture is different from either the domain wall motion or the S-W type of rotation mode.     

Hydrogen storage in destabilized chemical systems

We describe approaches for modifying the thermodynamics and kinetics of hydrogen sorption reactions in light-metal hydrides. Thermodynamic destabilization is achieved using additives that form new compounds during dehydrogenation. This lowers the enthalpy and increases the equilibrium pressure. We review current research in this area, emphasizing destabilization reactions involving LiBH₄. We also describe the use of nano-engineering approaches for reducing diffusion distances and increasing surface area, thereby increasing the hydrogen exchange rate. We focus on improving reaction rates by incorporating metal hydrides into nanoporous scaffolds.     

有机膦系预膜剂在碳钢表面的成膜机理

用旋转挂片法、极化曲线法、X射线光电子能谱法、原子力显微镜法等分析测试手段对以有机膦酸和Zn盐为主要成分的预膜剂在碳钢表面形成的缓蚀保护膜进行了综合表征.结果表明,有机膦酸和Zn盐成膜剂能够在碳钢表面形成致密的保护膜,对腐蚀的阴极和阳极过程都具有抑制作用;膜结构为磷酸盐螯合物颗粒的致密沉积,主要成分(mol%)为55%O、16?、14%P、5%Zn、7%C和2?.     

不锈钢换热器失效分析

利用化学分析和X射线能量色散谱等方法，对换热器 盘管孔蚀的原因进行了分析.结果表明晶间腐蚀、氯离子腐蚀以及温差腐蚀是盘管穿孔的主要因素，并提出了一些改进措施.     

Effects of oxygen and carbon on the magnetic properties and microstructure of Sm2Co17 permanent magnets

The research on the sintered Sm2Co17 permanent magnets prepared by metal injection molding is still at the exploratory stage. Carbon and oxygen are two key factors that influence the magnetic properties. In this article, the effects of oxygen and carbon on the properties and microstructure of the magnets have been studied. The results indicate that oxygen consumes the effective Sm content of the magnets and forms Sm2O3-the non-magnetism phase, which result in the deterioration of the magnetic properties. Besides, the magnetic properties decrease in evidence with increasing carbon content. The main factor that affects the magnetic properties is the deterioration of the microstructure of the magnets. The Sm（Co, Cu）5 phase decreases, whereas the cell size increases with the increase of the carbon content. When the carbon content is above 0.43 wt.%, the Sm（Co, Cu）5 phase is not enough to form a uniform cellular microstructure. Thus the magnetic properties disappear. ZrC is detected in the magnets by XRD when the carbon content is above 0.21 wt.%. ZrC also reduces the properties of the magnets.     

Effect of ball milling process on the microstructure of titanium-nanohydroxyapatite composite powder

Titaninm-nanohydroxyapatite （Ti-nHA） composite powders, composed of titanium with 10 vol.% and 20 vol.% of nano-hydroxyapatite, were milled in a planetary ball mill using alcohol media to avoid excessive heat. XRD and SEM were performed for characterization of the microstructure, and the homogeneity of Ti/HA nanocomposite powder was evaluated by EPMA with prolonged ball milling time. The results show that under the condition of wet milling, the grain size of Ti-nHA composite powders is decreased with the increase in ball milling time and the amount of the addition of nHA. While for milling of 30 h, the nanocomposite powder with free structure, which consists of the nano-hydroxyapatite （nHA） particles and titanium （Ti） phase, is obtained. Three stages of milling can be observed from the dement mapping of Ti, Ca, and P by EPMA; meanwhile, it is found that the nHA would be more homogenously distributed after milling for 30 h.