HACCP certification of food services in Philippine inter-island passenger vessels

This paper presents the efforts of the Bureau of Quarantine and International Health Surveillance (BQIHS), Department of Health (DOH), Philippines to launch a Good Manufacturing Procedure (GMP)–Hazard Analysis Critical Control Point (HACCP) Certification Program for food services operating in Philippine inter-island water vessels. The BQIHS improved its food sanitation audit system for inter-island ships by including in its traditional walk-through evaluation of GMP the review of documents for both GMP and HACCP, and the verification of HACCP implementation. The BQIHS is now identified as a GMP–HACCP certification provider to specific sectors of the local food service industry on a national level.     

A new method for distributing power usage across a sensor network

We present a method for more uniformly distributing the energy burden across a wireless ground-based sensor network communicating with an overhead unmanned aerial vehicle (UAV). A subset of sensor nodes, termed a transmit cluster, receives and aggregates data gathered by the entire network, and forms a distributed antenna array, concentrating the radiated transmission into a narrow beam aimed towards the UAV. Because these duties are power-intensive, the role of transmit cluster must be shifted to different nodes as time progresses. We present an algorithm to reassign the transmit cluster, specifying the time that should elapse between reassignments and the number of hops that should be placed between successive transmit clusters in order to achieve three competing goals: first, we wish to better and more broadly spread the energy load across the sensor network while, second, minimizing the energy expended in moving the transmit cluster, all the while, third, reducing to the extent practicable the time to bring the UAV and the sensor network’s beam into alignment. Additionally, we present a method for reconfiguring the communication burden between the ground-based sensor network and the UAV. We describe and analyze two alternative strategies to bring the UAV and the sensor network’s beam into alignment, while minimizing the energy expended by the sensor network. The performance of the two strategies is compared in terms of probability of beam-UAV alignment as a function of time, and the expected time to alignment. We examine the performance tradeoff between the choice of strategy and parameters of the sensor network that affect power conservation.     

Public and private attitudes towards “green” electricity: the case of Swedish wind power

There exists a political goal in Sweden and elsewhere to increase the use of renewable energy and wind power seems to be a favourable choice from an environmental perspective. However, although the public generally expresses a positive attitude towards wind power, the experience often shows that specific wind power projects face resistance from the local population. This paper analyses the attitudes towards wind power among the electricity consumers as well as the foundations of these attitudes. Results are based on a postal survey that was sent out to 1000 Swedish house owners. According to the results, the public is generally positive towards wind power. The probability of finding an average individual in support of wind power decreases with age and income. People with an interest in environmental issues are, however, more likely to be positive towards wind power than the average respondent and the results do not support the NIMBY-hypothesis. In addition, people that are more inclined to express public preferences are also more likely to be positive towards wind electricity than people who are less inclined to do so. These results imply, for instance, that the potential of markets for “green” electricity may be limited, other support schemes is thus required if the politically stated goal to increase wind power capacity is to be fulfilled.     

Moving beyond the fourth dimension with an IFC-based single project database

4D CAD has been an active research area for many years. The first generation 4D tools simulated construction schedules and demonstrated the potential benefits in several case studies. Researchers tried to improve the functionality of the first generation 4D tools by adding annotations and highlighting the building elements that have problems. The future generation 4D tools are expected to include more than these. It has been envisioned that 4D models would be part of project databases in order to take decisions related with different project dimensions.This paper presents the development and implementation of a new 4D planning tool which is a part of a product model-based project database. This tool brings the 4D simulation and cost estimation together and aims to contribute to what-if analysis in construction projects. The last part of the paper presents a case study in which the proposed prototype is evaluated.     

Papermaking characteristics of three Populus clones grown in the north-central United States

The papermaking properties of 22 pure and hybrid poplars are being evaluated in an on-going investigation. Twenty of the poplars were harvested after 7.5 years from three different sites in the Midwestern and North Central US. The other 2 poplars survived at only two of three sites (64 total samples). The Crandon hybrid had the highest growth rate (t ha⁻¹ y⁻¹) and wood density (both averaged across the 3 sites). This poplar had a high cellulose content (compared to the average), a low lignin content and produced bleached kraft fibers at a high yield (wt.% on wood chips). Further, this poplar responded very well to kraft pulping and oxygen delignification and bleached to the highest final brightness ever observed in our laboratory (94.5% Elrepho). It also produced an 18 kappa number unbleached pulp with <0.5% rejects in only two-thirds the time required for sugar maple (Acer saccharum).We also report on clone 220-5 that had the highest area-weighted average microfibril angle. Pulps from this poplar had excellent tensile properties and further improvements are expected with 1–2 years of additional growth that should result in a small, but significant increase in average fiber length. Some results are also presented for clone 313.55 and aspen (Populus tremuloides) to demonstrate the many substantial benefits that can be accrued from proper wood selection.     

Analysis of a Novel Flux-Weakening Structure of High-Speed Permanent-Magnet Motors Based on Soft-Magnetic Ferrite

Soft-magnetic ferrite has advantages of high initial magnetic permeability, high electric resistivity, low loss and low cost in the high-frequency alternating field. Considering the characters of soft-magnetic ferrite, this paper uses a soft-magnetic ferrite ring as stator core and presents a novel field-weakening structure of high speed PM motors. Based on this structure, a novel field-weakening method of PM motors can be presented. The equivalent reluctance of permanent magnetic field circuit can be changed by altering saturation degree of soft-magnetic ferrite core in this method. For the convenience of analysis and calculation, considering the magnetic field distribution in the motors, this paper deduces an equivalent two-dimensional finite element model of three-dimensional magnetic field, by which the field-weakening parameters of high speed PM motor can be conveniently analyzed. The simulation results of finite element model prove: the field-weakening structure of high speed PM motor based on soft-magnetic ferrite, presented in this paper, is valid and feasible, offers a valid and applicative method for field-weakening control of high speed PM motor.     

模型驱动下的Web应用系统自动生成

为了提高Web应用系统开发效率,提出了模型驱动下的Web应用系统自动生成方法。这种生成方法是以Me—taEdit＋作为元建模工具,首先创建Web应用系统元模型、定制DSL,进而建立Web应用系统领域模型,然后通过MetaEdit＋提供的生成器定义语言MERL,软件开发人员可以很方便地设计出Web应用系统所需的JSP生成器、Servlet生成器、Jayabeans生成器和数据库生成器,从Web应用系统图形模型直接生成整个Web应用系统。最后通过一个WebShopping实例详细介绍了模型驱动下的Web应用系统生成方法及生成过程。经测试,所生成的Web应用系统可以在Windows操作系统中的Web应用服务器上正确运行。     

基于LINQ to SQL的实验室网上预约系统的设计与实现

实验室开放管理已成了信息化时代高校实验教学改革的重要内容。本文利用B/S体系架构和LINQ to SQL技术,设计并实现实验室网上预约管理系统。该系统为高效的实验室管理提供了平台,能有效地平衡各实验室的利用率,减轻实验室管理人员的工作,使实验室的开放管理水平和服务水平推上了一个新的台阶。     

Forest park landscape pattern system based on FPGA and GIS system

Perceptual scenes and scene swing surveys are the ideas for reminding local and wooded area park executives and scene placement. The maximum precise analysis of panorama visualization, forest park landscapes, planning of essential scenic spots, and visualization and safety of Geographic Information Systems (GIS) cost tools is primarily based on management and historical data. Visual impacts and cultural, historical past adjustments to are expecting visual and natural landscapes. By deciding on points from a panorama attitude, intervention calls for vital signs and symptoms of safety. Among them, studies are being carried out in many towns around the arena. Geographic Information System (GIS) depends simply on noticeable assessment and is remembered for the social legacy plan. The Gate Array (FPGA) and Geographic Information System (GIS) are analyzed based on the panorama in every place within the painting's framework. In these activities, landscape planning is proposed thru the development of scientific Piedmont. Turin is conducting a few research. From a global attitude, the version suggests that these packages reduce the capability use of the era.     

Efficient FPGA implementation and verification of difference expansion based reversible watermarking with improved time and resource utilization

This paper presents Xilinx System Generator (XSG) model design for realization of reversible watermarking algorithm using Difference Expansion (DE) approach in System-On-Chip (SoC) Field Programmable Gate Array (FPGA) environment. The reversible watermarking is verified by taking a (4 × 4) sized test image and is applicable for larger sizes of cover images. The outcomes of the result demonstrate that the proposed structural design allows combining MATLAB-Simulink and XSG during graphical user interface for image processing applications. The superiority of the algorithm is justified by using comparative analysis with some well-known methods in both software and hardware environments. The method provides effectively higher PSNR at higher embedding capacity. It is also found that the method requires less time and hardware resources with throughput of 13.516 Mb/s at operational frequency of 80 MHz for real time implementation using FPGA.