Simulation of humidity control and greenhouse temperature tracking in a growth chamber using a passive air conditioning unit

In this paper, we define a dynamic discrete model of a passive air conditioning unit, without the more typical compression or absorption-refrigeration cycle. The unit is composed of heat exchangers, a positioning system and humid corrugated pads. The aim of the study was to follow the temperature in a greenhouse and to replicate it with a desired and stable relative humidity in a ventilated growth chamber. A control law, based on a quadratic criterion and dynamic programming, taking output error and energy consumption minimisation into account, was used to control the behaviour of the unit in spite of air intake disturbances. The results of the simulation indicate that the air conditioning unit can produce a variable climate in the growth chamber, with a wide range of relative humidity setpoints.     

An objective comparison of the cost effectiveness of three testing methods

Branch testing is a well established method for exercising software. JJ-path testing, whilst employed by some practitioners, is less popular, and the testing of JJ-pairs finds few adherents. In this paper an objective, practical study of the cost-effectiveness of these three testing methods is reported. The effectiveness of each method is assessed, in the presence of infeasible paths, not only on its ability to cover the specific structural element of code that it targets, but also on its ability to cover the structural elements targeted by the other two methods – the collateral coverage it achieves. The assessment is based on the results derived from experiments in which each of the three methods is applied to 35 units of program code.     

Synthesis and polymerization studies of 3-(+) and (−)-menthyl carboxylate pyrroles

The synthesis of 3-(−)- and 3-(+)-menthyl carboxylate pyrrole was achieved in four high yielding steps, including the triisopropylsilyl (TIPS) protection of the pyrrole nitrogen, bromination of the 3-position, lithium halogen exchange followed by reaction with menthyl chloroformate, and finally de-protection. Chemical polymerization of both the TIPS protected, and non-protected, menthyl carboxylate pyrroles was performed and the resulting polymers exhibited conductivity ranging from 0.6 to 2.3 S/cm. Polymerization of the 3-menthyl-N-TIPS pyrrole on the surface of wool was achieved by using solution and mist polymerization methods.     

Small volume PCR in PDMS biochips with integrated fluid control and vapour barrier

In this paper we demonstrate a new method for microfabricating PDMS devices that controls vapour diffusion, thereby reducing water loss at elevated temperatures and greatly increasing the reliability of the PCR. In the past, the vapour and liquid diffusion properties of the PDMS material in microfluidic devices have impaired performance. We show that this water loss is primarily due to vapour diffusion from the PDMS biochip and by implanting a polyethylene vapour barrier layer in the PDMS, the overall fluid loss was almost eliminated (reduced by a factor of 3). We have also developed a procedure to ensure irreversible bonding between the PDMS and the implant. With this improved microfabrication method we demonstrate the feasibility and advantages of performing small volume PCR genetic amplification (i.e. with less than 2 μl of PCR sample) within a PDMS–glass hybrid biochip. Diaphragm pumps and pinch-off valves were integrated in the system and these enabled fluid retention during the amplification stage and will facilitate higher levels of on-chip automation.     

Elastic and optical properties of BeS,BeSe and BeTe under pressure

We have performed the first principles full-potential linearized augmented plane wave calculations (FP-LAPW) with density functional theory in local density approximations (LDA), in aim to determine and to predict the pressure dependence of structural and optical properties of zinc-blende BeS, BeSe and BeTe compounds. The elastic constant, refractive index and its variation with hydrostatic pressure are well described.     

The Food Choice Questionnaire: Factorial invariant over western urban populations?

To assess the degree of measurement invariance of the Food Choice Questionnaire (FCQ) across western urban populations, it was filled out by demographically comparable samples in Canada (163 English speaking students, original version), Belgium (Flanders, N = 176, Dutch translation), and Italy (N = 163, Italian translation). Reliability of the FCQ-scales was moderate to good, but sometimes differed from the normative values. Item analysis pinpointed items with skewed distributions and low item-total correlations. Subsequent confirmatory and exploratory factor analyses revealed a suboptimal fit for the FCQ-model in all samples, with small to considerable divergences from the original configuration. The findings do not support the generalizability of the FCQ’s factor structure, but suggest that its items and underlying constructs may have different connotations across western urban populations. Explanations for the lack of convergence in factor structure and implications for research are discussed.     

Evaluation of sorbents for thiophene removal from liquid hydrocarbons

Thiophene is a commonly occurring sulfur compound in liquid hydrocarbon streams produced in a petroleum refinery. The concentration of thiophene often needs to be reduced to very low levels for most applications. Selective adsorption of thiophene is investigated in n-heptane, 1-octene and xylenes and their mixtures. A variety of adsorbents were tested for their selectivity and adsorption capacity. Improvements in adsorption capacity were attempted based on analysis of the adsorption mechanism. Adsorption capacity of NaX zeolite was found to be highest among tested adsorbents. However, competitive adsorption from xylenes reduced adsorption capacity for thiophene from mixtures containing large concentration of xylenes. Langmuir model is applied to describe observed competitive adsorption. Selective adsorption of organic sulfur compound could be used as a polishing step in a purification scheme which allows sulfur removal from hydrocarbons at low temperature and without the use of expensive hydrogen.     

海带生长素IAA分离纯化及高效液相色谱分析

对海带(Laminaria japonica Aresch.)中的生长素IAA的分离纯化条件进行优化,结果以超声法破碎细胞、采用体积分数95%乙醇浸提,乙醚萃取,硅胶脱色,然后通过Sephadex LH20柱层析为最佳条件,利用反向高效液相色谱(RP-HPLC)方法对IAA进行了定性和定量分析.实验表明:该方法操作简便、准确,重现性好,毒性较低,通过RP-HPLC结果可初步确定纯化产物中含有IAA,产量可达65～95μg/kg(鲜重).研究结果为进一步生物活性的研究和海带生长素及其他植物生长促进剂的开发和利用奠定了基础.