Scenario analysis and management options for sustainable river basin management: Application of the Elbe DSS

We developed a decision support system (DSS) for sustainable river basin management in the German Elbe catchment (～100,000 km²), called Elbe-DSS. The system integrates georeferenced simulation models and related data sets with a user friendly interface and includes a library function. Design and content of the DSS have been developed in close cooperation with end users and stakeholders. The user can evaluate effectiveness of management actions like reforestation, improvement of treatment plant technology or the application of buffer strips under the influence of external constraints on climate, demographic and agro-economic changes to meet water management objectives such as water quality standards and discharge control. The paper (i) describes the conceptual design of the Elbe-DSS, (ii) demonstrates the applicability of the integrated catchment model by running three different management options for phosphate discharge reduction (reforestation, erosion control and ecological-farming) under the assumption of regional climate change based on IPCC scenarios, (iii) evaluates the effectiveness of the management options, and (iv) provides some lessons for the DSS-development in similar settings. The georeferenced approach allows the identification of local inputs in sub-catchments and their impact on the overall water quality, which helps the user to prioritize his management actions in terms of spatial distribution and effectiveness.     

MODIS Collection 5 global land cover: Algorithm refinements and characterization of new datasets

Information related to land cover is immensely important to global change science. In the past decade, data sources and methodologies for creating global land cover maps from remote sensing have evolved rapidly. Here we describe the datasets and algorithms used to create the Collection 5 MODIS Global Land Cover Type product, which is substantially changed relative to Collection 4. In addition to using updated input data, the algorithm and ancillary datasets used to produce the product have been refined. Most importantly, the Collection 5 product is generated at 500-m spatial resolution, providing a four-fold increase in spatial resolution relative to the previous version. In addition, many components of the classification algorithm have been changed. The training site database has been revised, land surface temperature is now included as an input feature, and ancillary datasets used in post-processing of ensemble decision tree results have been updated. Further, methods used to correct classifier results for bias imposed by training data properties have been refined, techniques used to fuse ancillary data based on spatially varying prior probabilities have been revised, and a variety of methods have been developed to address limitations of the algorithm for the urban, wetland, and deciduous needleleaf classes. Finally, techniques used to stabilize classification results across years have been developed and implemented to reduce year-to-year variation in land cover labels not associated with land cover change. Results from a cross-validation analysis indicate that the overall accuracy of the product is about 75% correctly classified, but that the range in class-specific accuracies is large. Comparison of Collection 5 maps with Collection 4 results show substantial differences arising from increased spatial resolution and changes in the input data and classification algorithm.     

A decision support system for fisheries management using operations research and systems science approach

In this paper, we present a general framework, using a systems science approach, for developing a decision support system (DSS) for fisheries management. Decision support systems are quantitative tools for managers to evaluate outcomes of their policies prior to implementation. Our fishery model considers multiple stocks and fisheries simultaneously in balancing catch among targeted and protected fish abundances. Since in the Northeastern US multispecies fishery the distribution of abundance, catch-per-unit-effort and bycatch vary geographically, we focus on a spatial management approach to address their spatial variability. The core component of this DSS applies operations research techniques of simulation and optimization to determine the optimal inter-annual and intra-annual fishing plans in terms of fishing efforts in each sub-area and the time period. The result is the recommended amount to catch from each fish species at each sub-area at any time period so that while management objectives for sustainability of fish stocks are satisfied, the value of landings is maximized. The graphical user interface of the proposed DSS helps users to define inputs, to set constraints and sub-area boundaries, and to visualize the outcomes.     

Patient safety in outpatient surgery: the viewpoint of the healthcare providers

The objective of this study is to understand the viewpoint of healthcare providers with regard to patient safety in outpatient surgery settings. Two methods were used to gather data from the healthcare providers: (1) questionnaire with open-ended questions about six predefined stages of the patient care process; (2) survey with closed questions. With the first method, the main quality and safety of care issues concerned communication to patients, coordination of reports and forms, patient and staff time pressures and standards of care. The first two stages of the outpatient surgery process, i.e. patient work-up prior to day of surgery and patient admission and preparation on the day of surgery, yielded many more comments than the other four stages. The results of the structured questionnaire show that, overall, the healthcare providers report high quality of care provided by themselves (98%) and their surgery centre (96%). With regard to patient safety (i.e. cancellations of surgeries, patient safety problems and serious mistakes), there was a clear difference in perceptions reported by the physicians vs. the nurses and other staff. Nurses and other staff were more likely to report patient safety problems than physicians. The combination of qualitative data from the initial questionnaire and the quantitative data from the structured questionnaire provides a rather complete view of the outpatient surgery staff perceptions of quality and safety of care. This research highlights the importance of getting input from the healthcare providers regarding the quality and safety of care rather than relying only on traditional measures about patient outcomes.     

Differences in the chemical structure of the lignins from sugarcane bagasse and straw

Two major residues are produced by the sugarcane industry, the fibrous fraction following juice extraction (bagasse), and the harvest residue (straw). The structures of the lignins from these residues were studied by pyrolysis coupled to gas chromatography-mass spectrometry (Py-GC/MS), nuclear magnetic resonance (NMR), and derivatization followed by reductive cleavage (DFRC). Whereas the lignin from bagasse has a syringyl-rich p-hydroxyphenyl:guaiacyl:syringyl (H:G:S) molar composition of 2:38:60, the lignin from straw is guaiacyl-rich (H:G:S of 4:68:28). The compositional differences were also reflected in the relative abundances of the different interunit linkages. Bagasse lignin was primarily β–O–4′ alkyl-aryl ether substructures (representing 83% of NMR-measurable linkages), followed by minor amounts of β–5′ (phenylcoumarans, 6%) and other condensed substructures. The lignin from straw has lower levels of β-ethers (75%) but higher relative levels of phenylcoumarans (β–5′, 15%) and dibenzodioxocins (5–5/4–O–β, 3%), consistent with a lignin enriched in G-units. Both lignins are extensively acylated at the γ-hydroxyl of the lignin side-chain (42% and 36% acylation in bagasse and straw), predominantly with p-coumarates (preferentially on S-units) but also with acetates (preferentially on G-units) to a minor extent. Tetrahydrofuran structures diagnostically arising from β–β-coupling (dehydrodimerization) of sinapyl p-coumarate or its cross-coupling with sinapyl alcohol were found in both lignins, indicating that sinapyl p-coumarate acts as a monomer participating in lignification. The flavone tricin was also found in the lignins from sugarcane, as also occurs in other grasses.     

Combining hygrothermal and corrosion models to predict corrosion of metal fasteners embedded in wood

A combined heat, moisture, and corrosion model is presented and used to simulate the corrosion of metal fasteners embedded in solid wood exposed to the exterior environment. First, the moisture content and temperature at the wood/fastener interface is determined at each time step. Then, the amount of corrosion is determined spatially using an empirical corrosion rate model and the inputs of the first step. The result is a corrosion profile along the length of the fastener generated by summing the corrosion depths determined at each time step. We apply the combined model to predict the annual corrosion depth along a metal fastener in wood decks situated in nine different US cities. Corrosion profiles are found to exhibit the same general shape independently of climatic load, with the largest amount of corrosion occurring at 1–5 mm from the wood surface with corrosion depths ranging from 5 μm in Phoenix, Arizona to 45 μm in Hilo, Hawaii. Corrosion is confined to the first 7–20 mm of the fastener below the wood surface. By varying the climatic loads, we find that although there is a definite relation between total annual rain and total annual corrosion, under the same rain loads corrosion is higher for a climate with more evenly distributed rain events. The proposed combined model is able to capture corrosion behavior under varying loading. A sensitivity analysis gives guidelines for future corrosion modeling work for fasteners in wood.     

Chemical conversion of wood by treatment in a semi-batch reactor with subcritical water

Sugi (Cryptomeria japonica D. Don) wood meal was extracted with subcritical water in a semi-batch reactor. About 70–90% by weight of the sugi wood meal was converted into water-soluble compounds. The main components of the water-soluble compounds were monosaccharides and oligosaccharides, as a result of hydrolysis of cellulose and hemicellulose. White precipitates appeared in the solution after settling for 48 h. X-ray diffractometry clearly showed that precipitates had crystallized into cellulose II. High yield of total saccharides (including the precipitates) was obtained at 310–320 °C, 25 MPa and 65 g min⁻¹ water flow rate from a wood meal charge of 2.0 g, while the decomposition reaction was completed within about 20 min. Moreover, the yield increased to more than 60% when the wood meal was pretreated for improved wettability. It is shown that saccharides can be produced from sugi wood powder quickly and effectively by treatment in subcritical water.     

Template replication for full wafer imprint lithography

Typically, the Step and Flash Imprint Lithography (S-FIL^TM) process uses field-to-field drop dispensing of UV-curable liquids for step-and-repeat patterning. Several applications, including patterned magnetic media, photonic crystals, and wire grid polarizers, are better served by a process that allows high-throughput, full-wafer patterning of sub-100 nm structures with modest alignment. Full-wafer imprinting requires a full-wafer template; however, creation of a wafer-scale imprint template with sub-100 nm structures is not feasible with direct-writing approaches. This paper describes a practical methodology for creating wafer-scale templates suitable for full-wafer imprinting of sub-100 nm structures.The wafer-scale template is replicated from a smaller area master template using the S-FIL step-and-repeat process. The pattern is repeated to accommodate the wafer substrate targeted for a particular application. The tone of the master template is maintained by employing an SFIL/R^TM (reverse tone) pattern transfer process. To create the replicate template, the patterns are imprinted onto a fused silica wafer that has been coated with chromium and an organic transfer layer. A silicon-containing resist, Silspin^TM, is spun on to planarize the organic monomer material. Following an etch back of the Silspin, the monomer and transfer layer are patterned using the Silspin as a hard mask. The Silspin and monomer stack then serves as a masking layer for the chromium and fused silica etches. The remaining monomer and chromium are then removed to create a conformal replicate template.     

Semitransparent poly(styrene‐r‐maleic anhydride)/alumina nanocomposites for optical applications

This article presents the development and characterization of transparent poly(styrene‐r‐maleic anhydride) (SMA)/alumina nanocomposites for potential use in optical applications. Chemically treated spherical alumina nanoparticles were dispersed in an SMA matrix polymer via the solution and melt‐compounding methods to produce 2 wt % nanocomposites. Field emission scanning electron microscopy was used to examine the nanoparticle dispersion. When the solution method was used, nanoparticle reagglomeration occurred, despite the fairly good polymer wetting. However, through the coating of the alumina nanoparticles with a thin layer (ca. 20 nm) of low‐molecular‐weight SMA, reagglomeration was absent in the melt‐compounded samples, and this resulted in excellent nanoparticle dispersion. The resultant nanocomposites were semitransparent to visible light at a 2‐mm thickness with improved UV‐barrier properties. Their impact strengths, tensile strengths, and strains at break were slightly reduced compared with those of their neat resin counterpart, whereas a small enhancement in their moduli was achieved. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Direct current testing to measure corrosiveness of wood preservatives

A qualitative test that mimics the corrosion behaviour of metals in contact with treated wood without using wood specimens would be of great value in rapidly evaluating the corrosiveness of new wood preservatives. The objective of this study was to determine whether the linear polarisation resistance of metals immersed in a solution of preservative chemicals is related to corrosion of metals in wood. This technique was used to measure the corrosion rate of four types of metals in three different aqueous solutions of wood preservatives. The four metals were UNS G10180 (SAE 1018 steel), UNS S30400 (AISI 304 stainless steel), UNS S43000 (AISI 430 stainless steel), and UNS Z15001 (zinc). The metals were subjected to various concentrations of alkaline copper quat (ACQ-D), ammoniacal copper citrate (CC), and chromated copper arsenate type C (CCA-C). It was found that the corrosion of metals in the solutions of the wood preservatives did not correlate well to what is known about the corrosion of metals in contact with wood.