基于IPv6的多传感信息检测装置研制

针对工业环境下多维信息的测量和物联网技术应用发展的需求,研发一种通用的基于IPv6的多传感信息检测装置,装置以DSP和ARM为核心芯片,利用ARM芯片内嵌的EMIT、集成网络通信芯片LXT971和Socket网络编程,实现IPv6的网络通信设计;同时装置的DSP芯片采用基于插值计算的多维传感信息解耦校正技术,实现传感信息的准确检测。检测试验表明,该装置可实现在工业环境下多维信息的网络化准确监测。     

代谢网络可视化系统的力导向布局算法设计

针对生物化学代谢反应网络可视化系统的优化设计,提出了一个基于力导向模型的解决方案。新方案根据具体的可视化目标,综合拓扑信息进行参数调整。实验表明,这些调整给可视化的布局质量带来很大的改善。另外,代谢网络具有鲜明的无尺度网络特性。据此,进一步提出了针对枢纽结点的优化方案,在视觉效果上突出了代谢反应网络的无尺度特性。为了融合力导向方案和基于无尺度网络特性的局部调整方案,最后总结了一个三阶段的布局算法框架。     

分段线性动态矩匹配条带去除

由于探测器之间对接收的地物辐射信号的响应特征不同,导致遥感数据含有条带噪声,严重影响了图像质量及后续的定量计算。针对探测器响应函数在图像低值区及高值区呈非线性的特点,在着重分析矩匹配方法的基础上,提出分段线性动态矩匹配条带去除方法。方法设定阈值分割高中低值域统计区间,对探测器响应函数进行分段线性拟合,并对探测器每一分图像动态采用其领域内均值和标准差作为参考值进行条带纠正。应用TM数据第4波段及环境一号卫星高光谱数据进行去条带实验,并定性和定量地比较了该方法与动态矩匹配、傅里叶变换、自动均衡化曲线方法的去条带效果。结果表明该方法能够在保留图像基本信息的前提下,获得最佳的去条带效果,尤其能够提高非均匀地物分布区域内水体的条带去除效果。     

PVC防水卷材的配方研究

研究了利用废旧软聚氯乙烯回收料(旧料)生产PVC塑料防水卷材的配方及其对卷材拉伸性能的影响。结果表明,PVC塑料卷材的拉伸强度和断裂伸长率随PVC树脂添加比例增加而提高,而相同添加量的SG-3型PVC树脂比SG-5型PVC树脂的拉伸性能高；在试验范围内,增塑剂用量增加,卷材的拉伸强度降低,伸长率先升后降；添加CPE能提高PVC卷材伸长率,但拉伸强度有所下降。当CaCO_3用量低于20份时,卷材的拉伸强度和伸长率随CaCO_3添加量增加而提高。PVC防水卷材的优选配方(质量份)：旧料85份,PVC树脂(SG-3型)15份,DOP 5份,CPE 3份,稳定剂(TLS)0．6份,其它助剂适量。     

单螺杆混沌挤出过程周期性行为数值模拟

建立了混沌单螺杆挤出机计量段物理和数学模型。定义了更合理的边界条件,采用Carreau本构方程,采用有限体积方法对聚合物熔体在螺槽内流动的周期性效应进行了数值模拟分析。得到了不同位置的速度分布细节以及流体示踪粒子的行为轨迹。发现螺槽内速度分布表现出周期性和对称性的变化,揭示了同宿点及椭圆点存在及位置不变性,为进一步分析流体质点在相空间的动力学行为奠定了基础。     

Triangle strings: Structures for augmentation of vertex-disjoint triangle sets

Vertex-disjoint triangle sets (triangle sets for short) have been studied extensively. Many theoretical and computational results have been obtained. While the maximum triangle set problem can be viewed as the generalization of the maximum matching problem, there seems to be no parallel result to Berge's augmenting path characterization on maximum matching (C. Berge, 1957 [1]). In this paper, we describe a class of structures called triangle string, which turns out to be equivalent to the class of union of two triangle sets in a graph. Based on the concept of triangle string, a sufficient and necessary condition that a triangle set can be augmented is given. Furthermore, we provide an algorithm to determine whether a graph G with maximum degree 4 is a triangle string, and if G is a triangle string, we compute a maximum triangle set of it. Finally, we give a sufficient and necessary condition for a triangle string to have a triangle factor.     

多天线智能分集接收系统的设计

通过对多天线分集接收技术的分析,针对多径传输引起的衰落,提出一种多天线分集接收方法。本文将智能控制处理技术与空间分集接收天线技术相结合,通过智能控制选择合并算法。通过无线遥控接收机进行实验,取得良好接收效果。     

美的电扇前罩注射模设计

通过用注塑模CAE软件MOLDFLOW对塑件进行模流分析,选择聚丙烯的成型工艺参数,设计了一模一腔的注射模具。按聚丙烯的平均收缩率设计计算模具成型尺寸,设计链传动机构,用旋转脱出的方法解决塑件细纹脱模问题。给出了模具结构装配图,并以开模前和脱模后的模具状态图展示了模具工作过程。模具一次试模成功,运行灵活可靠,塑件精度达到设计要求,外表面光洁,给企业创造了经济效益。     

TYPHOON PROCESS AND ITS IMPACT ON THE SURFACE CIRCULATION IN THE NORTHERN SOUTH CHINA SEA

A severe typhoon Utor,occurring between July 3 and 8,2001,brought heavy rainfall,strong wind and storm surge.Utor was responsible for tremendous destruction and economic losses in Philippines,Taiwan and Guangdong.An air-sea model system (MM5 and Princeton Ocean Model(POM))was built to simulate meteorological dynamics and ocean circulation in the South China Sea(SCS).In the POM the output of MM5 was used as the input data.With an increased number of vertical levels,a high-resolution planetary boundary layer scheme and updated landuse/vegetation data,the accuracy of computing wind,temperature and other meteorological fields are improved in near surface and upper levels in MM5 simulations.The simulated trajectory and wind speed of Utor are close to the observed results.The simulated distribution of rainfall is accorded well with measured data in the Pearl River Delta(PRD)area.At different meteorological stations in Hong Kong,the wind,temperature and sea surface pressure are well simulated.The simulated ocean surface current and surface temperature fields have an obvious rightward-biased response to the typhoon Utor,and the maximum velocity and the lowest temperature region appear in the 30 km of the right side of the typhoon track.The typhoon Utor could make the water 50m under the surface ocean unwell to surface and the ocean surface temperature decrease by about 2°C.     

A3菌产絮凝剂培养动力学及靛蓝废水脱色研究

从土壤中筛选出1株产微生物絮凝剂的菌株A3,利用均匀设计安排试验,用曲线拟合创建数学模型的方法研究了其产絮凝剂的培养基条件和利用A3菌产絮凝剂对靛蓝废水进行脱色处理,获得A3菌最佳絮凝剂生产条件和最佳靛蓝废水脱色工艺.结果表明,A3菌产絮凝剂的最佳培养条件为葡萄糖添加量2.2%、酵母膏添加量0.51%、pH 7.6、温...