Low Temperature Characteristics of the Metal–Superconductor NIS Tunneling Thermometer

We discuss the temperature dependence of a common low temperature local thermometer, a tunnel junction between a superconductor and a normal metal (NIS junction). Towards the lowest temperatures its characteristics tend to saturate, which is usually attributed to selfheating effects. In this technical note, we reanalyze this saturation and show that the temperature independent subgap current of the junction alone explains in some cases the low temperature behavior quantitatively.

     

Simplified anode architecture for PEMFC systems based on alternative fuel feeding: Experimental characterization and optimization for automotive applications

The need to reduce PEMFC systems cost as well as to increase their durability is crucial for their integration in various applications and especially for transport applications. A new simplified architecture of the anode circuit called Alternating Fuel Feeding (AFF) offers to reduce the development costs. Requiring a new stack concept, it combines the simplicity of Dead-End Anode (DEA) with the operation advantages of the hydrogen recirculation. The three architectures (DEA, recirculation and AFF) are compared in terms of performance on a 5-kW test bench in automotive conditions, through a sensitivity analysis. A gain of 17% on the system efficiency is observed when switching from DEA to AFF. Moreover, similar performances are obtained both for AFF and for recirculation after an accurate optimization of the AFF tuning parameters. Based on DoE data, a gain of 25% on the weight of the anodic line has been identified compared to pulsed ejector architecture and 43% with the classic recirculation architecture with blower only (Miraï).     

A practical assessment of risk-averse approaches in production lot-sizing problems

ABSTRACT

This paper presents an empirical assessment of four state-of-the-art risk-averse approaches to deal with the capacitated lot-sizing problem under stochastic demand. We analyse two mean-risk models based on the semideviation and on the conditional value-at-risk risk measures, and alternate first and second-order stochastic dominance approaches. The extensive computational experiments based on different instances characteristics and on a case-study suggest that CVaR exhibits a good trade-off between risk and performance, followed by the semideviation and first-order stochastic dominance approach. For all approaches, enforcing risk-aversion helps to reduce the cost-standard deviation substantially, which is usually accomplished via increasing production rates. Overall, we can say that very risk-averse decision-makers would be willing to pay an increased price to have a much less risky solution given by CVaR. In less risk-averse settings, though, semideviation and first-order stochastic dominance can be appealing alternatives to provide significantly more stable production planning costs with a marginal increase of the expected costs.     

Construction of BiVO4 microspheres sensitized TiO2 NTAs for the enhanced photocatalytic mineralization of organic dyes

In the present work, BiVO₄ microspheres were deposited on TiO₂ NTAs via the solvothermal method using urea as the mineralizer. The binary heterojunction formation significantly enhanced the solar response region and intensity, and the electron transfer path was built at the interface of two semiconductors, which was the main reason for the enhanced photoelectrochemical and photocatalytic performances. The S-2 electrode prepared with urea concentration of 2 mol/L displayed the high visible light photocurrent of 73.76 μA/cm² and photovoltage of −0.30 V. Furthermore, the S-2 photocatalyst also showed excellent photocatalytic decoloration ability of MO, RhB and MB dyes, and the corresponding decomposition efficiencies were 55.82%, 41.62% and 89.90% under solar irradiation. Except for the organic dyes, Cr(VI) ions also could be reduced into Cr(III), and the photocatalytic efficiency achieved 74.05% after 3 h solar irradiation. The active group and photocatalytic mechanism were proposed to illuminate the essential reason. The experimental results indicated that the novel BiVO₄/TiO₂ NTAs with binary heterojunction are attractive photocatalysts for the dyeing and printing water treatment.     

Non-singular antiplane fracture theory within nonlocal anisotropic elasticity

In the present paper, the distributed dislocation technique is applied for the analysis of anisotropic materials weakened by cracks. Eringen's theory of nonlocal elasticity of Helmholtz type is employed. The non-singular screw dislocation within anisotropic elasticity is distributed to model cracks of mode III. The corresponding dislocation density functions are evaluated using the proper crack-face boundary conditions. The nonlocal stress field within a plane weakened by cracks is determined. The crack opening displacement is also discussed within the framework of nonlocal elasticity. The stress singularity of the classical linear elasticity is removed by the introduction of the nonlocal theory of elasticity. The general anisotropic case and the special case of orthotropic material are studied. The effect of material orthotropy is presented for a crack which is not necessarily aligned with the principal orthotropy direction.     

Operations research in solid waste management: A survey of strategic and tactical issues

Solid waste management (SWM) is an increasingly complex task, absorbing a huge amount of resources and having a major environmental impact. Computerized systems based on operations research techniques can help decision makers to achieve remarkable cost savings as well as to improve waste recovery. Nevertheless, the literature is quite scattered and disorganized. The objective of this paper is to present an updated survey of the most relevant operations research literature on SWM, mainly focusing on strategic and tactical issues. In addition to providing an extensive bibliographic coverage, we describe the relationships between the various problems, and outline future research.     

A fuzzy neural network approach for online fault detection in waste water treatment process

In this paper, an effective strategy for fault detection of sludge volume index (SVI) sensor is proposed and tested on an experimental hardware setup in waste water treatment process (WWTP). The main objective of this fault detection strategy is to design a system which consists of the online sensors, the SVI predicting plant and fault diagnosis method. The SVI predicting plant is designed utilizing a fuzzy neural network (FNN), which is trained by a historical set of data collected during fault-free operation of WWTP. The fault diagnosis method, based on the difference between the measured concentration values and FNN predictions, allows a quick revealing of the faults. Then this proposed fault detection method is applied to a real WWTP and compared with other approaches. Experimental results show that the proposed fault detection strategy can obtain the fault signals of the SVI sensor online.     

Additive manufacturing in the spare parts supply chain

As additive manufacturing (AM) evolves to become a common method of producing final parts, further study of this computer integrated technology is necessary. The purpose of this research is to evaluate the potential impact of additive manufacturing improvements on the configuration of spare parts supply chains. This goal has been accomplished through scenario modeling of a real-life spare parts supply chain in the aeronautics industry. The spare parts supply chain of the F-18 Super Hornet fighter jet was selected as the case study because the air-cooling ducts of the environmental control system are produced using AM technology. In total, four scenarios are investigated that vary the supply chain configurations and additive manufacturing machine specifications. The reference scenario is based on the spare parts supplier's current practice and the possible future decentralization of production and likely improvements in AM technology. Total operating cost, including downtime cost, is used to compare the scenarios. We found that using current AM technology, centralized production is clearly the preferable supply chain configuration in the case example. However, distributed spare parts production becomes practical as AM machines become less capital intensive, more autonomous and offer shorter production cycles. This investigation provides guidance for the development of additive manufacturing machines and their possible deployment in spare parts supply chains. This study contributes to the emerging literature on AM deployment in supply chains with a real-world case setting and scenario model illustrating the cost trade-offs and critical requirements for technology development.