Effect of chemical phosphorylation on solubility of buffalo milk proteins

Buffalo milk proteins (casein, co-precipitate or whey protein concentrate) were phosphorylated with phosphorus oxychloride (POCl₃) at three different pH values (5.0, 7.0 and 9.0). The solubilities of phosphorylated milk proteins were examined over the pH range 3.0–9.0 in water and ionic (0.1 m NaCl or 10–70 mm Ca²⁺) systems. The solubilities of buffalo milk proteins decreased at pH 3.0, while there was an increase in the solubilities of casein and co-precipitate near their isoelectric points upon phosphorylation. Solubilities of these phosphorylated milk proteins were pH dependent in 0.1 m NaCl but there was a decrease in their solubilities with increase in calcium ion concentration. This alteration could be due to the shifting of isoionic points of phosphorylated buffalo milk proteins towards acidic pH.     

Simulation of humidity control and greenhouse temperature tracking in a growth chamber using a passive air conditioning unit

In this paper, we define a dynamic discrete model of a passive air conditioning unit, without the more typical compression or absorption-refrigeration cycle. The unit is composed of heat exchangers, a positioning system and humid corrugated pads. The aim of the study was to follow the temperature in a greenhouse and to replicate it with a desired and stable relative humidity in a ventilated growth chamber. A control law, based on a quadratic criterion and dynamic programming, taking output error and energy consumption minimisation into account, was used to control the behaviour of the unit in spite of air intake disturbances. The results of the simulation indicate that the air conditioning unit can produce a variable climate in the growth chamber, with a wide range of relative humidity setpoints.     

First-order modeling and stability analysis of illusory contours

In visual cognition, illusions help elucidate certain intriguing latent perceptual functions of the human vision system, and their proper mathematical modeling and computational simulation are therefore deeply beneficial to both biological and computer vision. Inspired by existent prior works, the current paper proposes a first-order energy-based model for analyzing and simulating illusory contours. The lower complexity of the proposed model facilitates rigorous mathematical analysis on the detailed geometric structures of illusory contours. After being asymptotically approximated by classical active contours, the proposed model is then robustly computed using the celebrated level-set method of Osher and Sethian [S. Osher, J.A. Sethian, Fronts propagating with curvature-dependent speed: algorithms based on Hamilton–Jacobi formulations, J. Comput. Phys., 79 (12) (1988) 12–49] with a natural supervising scheme. Potential cognitive implications of the mathematical results are addressed, and generic computational examples are demonstrated and discussed.     

Deformation behaviour of iron-doped alumina

Compressive creep tests in air were carried out on 1 cat.% Fe-doped alumina at a temperature T=1400 °C. Iron doping affected the plastic deformation by different ways in relation with Fe²⁺ cations population. Fe²⁺ cations sped up the deformation rates. FeAl₂O₄ spinel precipitates were identified and they were found (i) to interact with alumina grain boundaries (ii) to limit the grain growth within a range of strain. The Fe²⁺ cations underwent oxidation and this resulted in the dissolution of the some precipitates and in the decrease of deformation rates. It was suggested that deformation sped up this evolution through mass transport and that time was not a dominating parameter.     

Electrochemical characteristics of heme proteins in hydroxyethylcellulose film

A stable film made from hydroxyethylcellulose (HEC) on pyrolytic graphite (PG) electrode was employed for incorporating hemoglobin (Hb), myoglobin (Mb) and horseradish peroxidase (HRP), and the electrochemical characteristics of the proteins were studied correspondingly. Experimental results revealed that HEC film could greatly accelerate electron transfer between the proteins and electrode, and the proteins showed a thin layer electrochemical behavior in the film. Moreover, all the proteins in the film exhibited good catalytic activity towards the reduction of hydrogen peroxide (H₂O₂) in the low H₂O₂ concentration range. In the high concentration range, H₂O₂ would exhibit toxicity effect on the proteins. The electrochemical properties and electrocatalytic abilities of the three heme proteins in HEC film have been compared, and the optimal conditions for H₂O₂ biosensor fabrication have been obtained.     

Application of spent grains to increase porosity in bricks

The dumping of spent grains is going to be more difficult because of the increasing number of cattle. That means new ways of dumping must be developed.The goal of the work was to test the technical properties of bricks produced with spent grains added to increase porosity.The flexural strength of the fired samples remained at 8.5 MPa; the air-dried samples exhibited a small increase in flexural strength. The shrinkage and true density were almost identical, while the raw density, capacity for water absorption and open porosity showed minor differences.In the large-scale experiment no problems were observed during the production. The bricks produced with spent grains possessed a comparable or higher strength, a higher porosity and a reduced density after firing than those from a standard production clay. Because of the lower sintering temperatures the fired clay product was more strongly sintered, exhibiting both greater strength and higher porosity.     

HPLC–MS analysis of the green food colorant sodium copper chlorophyllin

Five commercial samples of sodium copper chlorophyllin, a green food colorant, were analysed by high-performance liquid chromatography (HPLC) using diode-array detection (DAD) and mass spectrometry (MS). Some of the constituents were identified using authentic standards, whereas others were identified tentatively based on their absorption spectra and mass data. The composition of three of the samples was very similar, whereas the other two were quite different. In the three former samples, the three largest peaks could be assigned to Cu chlorin e₆, Cu chlorin p₆, and Cu isochlorin e₄. In one of the two other samples, these three compounds were also among the largest peaks, whereas Cu chlorin e₆ was a small peak in the last sample and Cu chlorin p₆ was absent altogether. Porphyrins were also present in the samples, while except in one of the samples chlorins derived from chlorophyll b were largely absent.Industrial relevanceSodium copper chlorophyllin is a green food colorant made from chlorophyll. Sodium copper chlorophyllin is made by saponifying chlorophyll and coppering the resulting product. This processing leads to a complex mixture of compounds. An analytical method was developed that can be used to identify many of these compounds and show the extent of coppering and degradation of sodium copper chlorophyllin, which may be used industrially to optimize the production of sodium copper chlorophyllin.     

Application of an electronic nose for quality assessment of modified atmosphere packaged poultry meat

The applicability of an electronic nose for the quality control of modified atmosphere (MA) packaged broiler chicken cuts was evaluated in different temperature regimes. The electronic nose results were compared with those obtained by microbiological, sensory and headspace GC analyses. The electronic nose could clearly distinguish broiler chicken packages with deteriorated quality from fresh packages either earlier than or at the same time as the sensory quality deteriorated. Concerning the microbiological quality, the counts of Enterobacteriaceae and hydrogen sulphide-producing bacteria were most consistent with the electronic nose results. The results indicated that the electronic nose was capable of detecting even early signals of spoilage in MA packed poultry meat.     

Antibacterial effect of phenolic compounds from different wines

The antimicrobial properties of pure phenolic compounds and polyphenols of different wines against pathogens were investigated. It was observed that bacterial species exhibited different sensitivities towards the different concentrations of phenolic compounds. Escherichia coli was the most sensitive bacterium and Flavobacterium sp. was resistant against all phenolic compounds tested. All wine samples showed antimicrobial properties and the inhibition increased when the polyphenols concentration of wines increased. Clarified wines were inactive against all bacteria, indicating that polyphenolic compounds present in red wines, are responsible for the antimicrobial effects observed. The different concentrations of polyphenols in wines could have an important impact on consumers with the consequent increase in wine commercialization.