A novel method of shrimp blanching by CO2 heat pump: Quality,energy, and economy analysis

To reduce the energy consumption of the shrimp blanching process and improve the economic value of the blanched product, a transcritical CO₂ heat pump blanching system (THPB system) was designed in this paper. The trends of astaxanthin were investigated at atmospheric pressure near boiling temperature, combined with the color and structural properties of shrimp samples, and the optimal blanching times of 270 s and 240 s were obtained at 90°C and 95°C, respectively. In contrast to the fuel blanching system (FB system) at 100°C, the annual standard coal consumption of the THPB system with 90°C blanching is decreased by 79%, and the annual operating cost can be saved by CNY 63,800, with a payback period of about 3.13 years.Industrial relevanceBlanching is one of the effective ways to prolong the shelf life of shrimp. However, the research on the blanching time and temperature of shrimp is not comprehensive. In addition, the traditional fuel blanching process has high energy consumption and pollution, and can no longer meet the quality requirements of the modern food processing industry. Heat pump has been shown to have better performance in food drying, but it is less used in blanching. The information presented in this study may provide other insights into food processing.     

A robust method for axis identification

The present paper proposes a new method for axis identification in discrete axially symmetrical geometric models. This method is based on-a-never-used-before property of the axially symmetrical surfaces for which the symmetry line of any section curve of the surface (or of a portion of it in the case of an incomplete axially symmetrical surface) always intersects the axis of symmetry of the surface. Thus the working principle of the method makes it very robust to local defectiveness, measurement noise and outliers.In order to compare it with the most cited methods presented in literature, several types of tests have been designed and performed. The robustness of those methods, on the one hand, has been evaluated by defining the Statistical Confidence Boundary at 1σ confidence level. The trueness of the method, on the other hand, has been evaluated on geometric models obtained by measuring real objects. The high robustness, which characterizes the proposed method, makes it particularly suitable for product geometric inspection where high accuracy is required.     

Public-sector reform: Lessons from the privatisation experiment in Greece

This paper explores the process of public sector reform in Greece through the lens of privatisation. It is suggested that the transformation of the domestic post-war interventionist state into the current market-oriented paradigm has been disrupted and dependent on changing reform rationales. Along with the effect of historical dynamics on the direction and scale of change, the explanatory power of external determinants of reform is stressed. Findings reflect a direct linkage between the intensity of external pressure and the pace of reforms. The sustainability of gradual privatisation reforms seems more certain than the outcomes of fast-track privatisations under policy conditionality.     

Heterometallic sulfide cluster [Ag6Sn6S20]10 −: Solvothermal syntheses and characterizations of silver thiostannates with lanthanide complex counter cations

Novel organic hybrid silver thiostannates [Hen]₄[Ln(en)₄]₂[Ag₆Sn₆S₂₀]·3en (Ln = Er, 1; Tm, 2; Yb, 3) were prepared by the reactions of Ln₂O₃, Ag, Sn and S in ethylenediamine (en) under solvothermal conditions. Six SnS₄ tetrahedra and six AgS₃ triangles are connected into the heterometallic sulfide cluster [Ag₆Sn₆S₂₀]^10 − via edge-sharing. In the [Ag₆Sn₆S₂₀]^10 − cluster, a hexanuclear Ag₆S₆ core is enclosed by two Sn₃S₁₀ fragments. The Ag₆S₆ core is the first As–S cluster stabilized by inorganic SnS₄ ligands. In 1–3, all Ln^3 + ions are in 8-fold coordination environments that involved four bidentate en ligands, forming bicapped trigonal prisms. Compounds 1–3 show well-defined absorption edges with band gaps in the range of 2.18–2.47 eV.     

Industrial sugar beets to biofuel: Field to fuel production system and cost estimates

Specialized varieties of sugar beets (Beta vulgaris L.) may be an eligible feedstock for advanced biofuel designation under the USA Energy Independence and Security Act of 2007. These non-food industrial beets could double ethanol production per hectare compared to alternative feedstocks. A mixed-integer mathematical programming model was constructed to determine the breakeven price of ethanol produced from industrial beets, and to determine the optimal size and biorefinery location. The model, based on limited field data, evaluates Southern Plains beet production in a 3-year crop rotation, and beet harvest, transportation, and processing. The optimal strategy depends critically on several assumptions including a just-in-time harvest and delivery system that remains to be tested in field trials. Based on a wet beet to ethanol conversion rate of 110 dm³ Mg⁻¹ and capital cost of 128 M$ for a 152 dam³ y⁻¹ biorefinery, the estimated breakeven ethanol price was 507 $ m⁻³. The average breakeven production cost of corn (Zea mays L.) grain ethanol ranged from 430 to 552 $ m⁻³ based on average net corn feedstock cost of 254 and 396 $ m⁻³ in 2014 and 2013, respectively. The estimated net beet ethanol delivered cost of 207 $ m⁻³ was lower than the average net corn feedstock cost of 254–396$ m⁻³ in 2013 and 2014. If for a mature industry, the cost to process beets was equal to the cost to process corn, the beet breakeven ethanol price would be $387 m^-3 (587 $ m⁻³ gasoline equivalent).     

Carbon nanotube filter for heavy metal ion adsorption

This study investigated carbon nanotube filtration technology using catalyst particles supported on silicalite-1–biomorphic carbon materials (BCMs). Aqueous solutions of Mn(II), Cu(II), Cr(III), Cd(II), and Pb(II) were used to test the efficiency of heavy metal ions removal. Carbon nanotubes (CNTs) were synthesized and grown on BCMs by the chemical vapor deposition method catalyzed with the catalyst (Co, Fe, and Ni). The synthesized CNTs with Co– and Fe– nanoparticles were typically multi-walled carbon nanotubes, and they showed good crystallinity (I_D/I_G = 1.05) and yield of (11.10 and 8.86) %. The removal efficiency of Mn(II), Cu(II), Cr(III), Cd(II), and Pb(II) ions using Co-catalyzed CNT filter was 97.57%, 98.01%, 97.89%, 97.42%, and 99.99%, respectively.     

Validation of performance of real-time kinematic PPP. A possible tool for deformation monitoring

Structural failures (bridge or building collapses) and geohazards (landslides, ground subsidence or earthquakes) are worldwide problems that often lead to significant economic and loss of life. Monitoring the deformation of both natural phenomena and man-made structures is a major key to assessing structural dynamic responses. Actually, this monitoring process is under real-time demand for developing warning and alert systems.One of the most used techniques for real-time deformation monitoring is the Global Navigation Satellite System (GNSS) real-time procedure, where the relative positioning approach, using a well-known reference station, has been applied.This study was conducted to evaluate the actual quality of the real-time kinematic Precise Point Positioning (PPP) GNSS solution for deformation monitoring, where it can be concluded that a promise tool is under development and should be taken into account on actual and near future real-time deformation monitoring studies and applications.     

Potential bio-activity of whey fermented extract as sanitizer of organic grown lettuce

Consumption of vegetables is increasing due to demand for healthy products in peoples' diets. To reduce microbial contamination and maintain freshness, industrial processes in Portugal rely on minimally processing of vegetables with hypochlorite as sanitizer. Formation of toxic chlorine derivatives has raised concern restrictions to its use and alternatives with whey permeate as a disinfection agent has been attempted. The aim of this work was to evaluate the bio potential of fermented cheese whey, for use on disinfection of minimally processed lettuce organically grown.Assays were made with whey obtained from inoculated milk during cheese processing, fermented for 120 h at 37 °C, after which, among other carbohydrates, lactic acid was measured by HPLC, giving average yields of 18 g L⁻¹.The sanitizing effect of whey, undiluted, 75 and 50% solutions, was compared with 110 ppm sodium hypochlorite, after rinsing. Aerobic Microorganisms (AM), Psychrotrophic Microorganisms (PM) and Enterobacteriaceae (ENT), were used as indicators for hygiene quality. For a level of significance of P < 0.05, the hygiene quality standards of lettuce samples, were better using 75% whey solution (AM 6.62, PM 7.48 cfu g⁻¹), than using sodium hypochlorite (AM 7.48, PM 8.15 cfu g⁻¹), for the 7 days of shelf life studied. Evaluation of Enterobacteriaceae showed significant differences after 3 days, between water (ENT 4.98 cfu g⁻¹) sodium hypochlorite (ENT 4.81 cfu g⁻¹) and 75% solution of whey (ENT 4.63 cfu g⁻¹).Considering the actual limitations imposed to chlorine sanitation, these results point a good alternative to the food industry, especially for organic fresh vegetables, which are chemical free brands.     

Unusual Two-Step Assembly of a Minimalistic Dipeptide-Based Functional Hypergelator

Self-assembled peptide hydrogels represent the realization of peptide nanotechnology into biomedical products. There is a continuous quest to identify the simplest building blocks and optimize their critical gelation concentration (CGC). Herein, a minimalistic, de novo dipeptide, Fmoc-Lys(Fmoc)-Asp, as an hydrogelator with the lowest CGC ever reported, almost fourfold lower as compared to that of a large hexadecapeptide previously described, is reported. The dipeptide self-assembles through an unusual and unprecedented two-step process as elucidated by solid-state NMR and molecular dynamics simulation. The hydrogel is cytocompatible and supports 2D/3D cell growth. Conductive composite gels composed of Fmoc-Lys(Fmoc)-Asp and a conductive polymer exhibit excellent DNA binding. Fmoc-Lys(Fmoc)-Asp exhibits the lowest CGC and highest mechanical properties when compared to a library of dipeptide analogues, thus validating the uniqueness of the molecular design which confers useful properties for various potential applications.