Self-assembled cubic-hexagonal perovskite nanocomposite as intermediate-temperature solid oxide fuel cell cathode

Self-assembly is an emerging strategy for preparing composite cathodes with good oxygen electrochemical reduction activity and congenital chemical compatibility for intermediate-temperature solid oxide fuel cell (IT-SOFC). Here we report that a self-assembled BaCo_0.6Zr_0.4O_3-δ (BZC-BC) nanocomposite is prepared through one-pot glycine-nitrate process and exhibits high cathode performance. The BZC-BC nanocomposite is composed of 62 mol% cubic perovskite BaZr_0.82Co_0.18O_3-δ (BZC) as an ionic conductor and 38 mol% hexagonal perovskite BaCo_0.96Zr_0.04O_2.6+δ (12H-BC) as a mixed ionic and electronic conductor. The BZC-BC nanocomposite has the pomegranate-like particles aggregated with a larger number of nanoparticles (50-100 nm) which greatly enlarge the three-phase boundary sites. The BZC-BC nanocomposite exhibits a thermal expansion coefficient of 12.89 × 10⁻⁶ K⁻¹ well-matched with that of Ce_0.8Gd_0.2O_3-δ (12.84 × 10⁻⁶ K⁻¹) electrolyte. The high electro-catalytic activity of BZC-BC nanocomposite cathode for oxygen reduction is reflected by the low polarization resistances of oxygen ions incorporation at cathode/electrolyte interface (0.02823 Ω cm²), oxygen species diffusion (0.03702 Ω cm²) and oxygen adsorptive dissociation (0.07609 Ω cm²) at 700 °C. The single cell with BZC-BC nanocomposite cathode achieves the maximum power density of 1094 mW cm⁻² at 650 °C and shows good stability under 25 h run.     

PTA污水厂COD在线监测结果不合格原因分析及对策

对在线自动监测仪监测结果与人工化验数据存在误差的原因进行分析,以提高在线自动监测仪监测结果的科学性和可靠性,并提出了相对应的建议,有效提升装置出水合格率。     

Construction of BiVO4 microspheres sensitized TiO2 NTAs for the enhanced photocatalytic mineralization of organic dyes

In the present work, BiVO₄ microspheres were deposited on TiO₂ NTAs via the solvothermal method using urea as the mineralizer. The binary heterojunction formation significantly enhanced the solar response region and intensity, and the electron transfer path was built at the interface of two semiconductors, which was the main reason for the enhanced photoelectrochemical and photocatalytic performances. The S-2 electrode prepared with urea concentration of 2 mol/L displayed the high visible light photocurrent of 73.76 μA/cm² and photovoltage of −0.30 V. Furthermore, the S-2 photocatalyst also showed excellent photocatalytic decoloration ability of MO, RhB and MB dyes, and the corresponding decomposition efficiencies were 55.82%, 41.62% and 89.90% under solar irradiation. Except for the organic dyes, Cr(VI) ions also could be reduced into Cr(III), and the photocatalytic efficiency achieved 74.05% after 3 h solar irradiation. The active group and photocatalytic mechanism were proposed to illuminate the essential reason. The experimental results indicated that the novel BiVO₄/TiO₂ NTAs with binary heterojunction are attractive photocatalysts for the dyeing and printing water treatment.     

Tungsten-based heterogeneous multilayer structures via diffusion bonding

Recent work has shown that tungsten (W) and other refractory metals with body-centered cubic (bcc) structures exhibit certain novel behavior when their grain size, d, is refined into the ultrafine (UFG, 100 nm < d < 1000 nm) or nanocrystalline (NC, d < 100 nm) regime. For example, it has been shown that bcc refractory metals with such microstructures show decreased strain rate sensitivity besides their elevated strength and vanishing strain hardening response. Consequently, under both quasi-static and high-strain-rate loading, plastic instability in the form of shear banding becomes the dominant mode of plastic deformation. Such behavior is long sought-after in certain applications. However, due to the technology used to refine the grain size (primarily severe plastic deformation), the inability to scale the dimensions of the material may limit wider use and application of UFG/NC bcc refractory metals. In this work, the feasibility was demonstrated of production of large-scale W parts using a diffusion bonding method. The microstructure, preliminary mechanical properties, and issues and challenges associated with the fabrication procedures were examined and discussed. It is envisioned that diffusion bonding may serve as a promising technology for scaled-up fabrication of UFG bcc refractory metals for the targeted application.     

Influence of deposition parameters on surface morphology and application of CuInS2 thin films in solar cell and photocatalysis

Copper indium disulfide (CuInS₂) thin films as an absorption layer for solar cell and photocatalytic degradation of organic pollutants, were successfully electrodeposited on the FTO coated glass substrate using the simple and inexpensive electrodeposition method and a sulfurization process. The effects of the Cu/In molar ratio, annealing temperature and kind of Cu²⁺ precursor (Cu(salen) and Cu(acac)₂ as novel Cu²⁺ precursors) on the structural and morphological properties of samples were examined. The XRD diffraction patterns and energy dispersive spectroscopy measurements exhibit that high-quality film with superior crystalline structure was formed in the presence of Cu(salen) as Cu²⁺ precursor. Also, we found that a suitable heat treatment temperature could suppress the CuS phases and form well-crystallized CIS. As we know, this is the first reported efficiency for any CuInS₂ superstrate solar cell to date that fabricated using Cu(salen) as Cu²⁺ precursor. In addition, the photocatalytic degradation of organic dye in the presence of as-synthesized CuInS₂ thin films was studied. The as-prepared semiconductor photocatalysts have a good reusability; it can be successfully reused for 5 times recycling photoactivity tests.     

三相全控桥式整流电路实验装置的研制

介绍了开发三相全控桥式整流电路实验装置的背景;叙述了TC787芯片的内部结构、工作原理、特点及芯片的各个管脚的功能;详细介绍了该实验装置的触发电路的设计思路、设计结果和工作原理;介绍了该实验装置的主电路部分的结构和特点。该实验装置性能可靠,符合本科生实验要求。     

小流域氮流失特征及其影响因素

由非点源流失的氮是造成水体污染的主要因子之一，而土地利用方式往往对氮的流失产生重要影响。本课题在福建省九龙江流域遴选了4个不同土地利用方式的小流域，通过在自然降雨条件下现场采样与室内分析相结合，研究不同土地利用结构的小流域氮的流失特征和影响因素。研究结果表明：总氮、可溶态氮和泥沙结合态氮的浓度通常比径流先达到峰值，然后开始降低；氮的流失以可溶态氮为主(占73%～98.3％)，因此其流失量主要受径流量的影响与雨强关系不大；土地利用方式对氮的流失有明显影响，一般植被覆盖度提高可以降低流失，而农业活动会加剧流失；此外，在高植被覆盖度的天然林地，氮的流失呈现出以泥沙结合态为主。通过本研究可以看出土地利用结构的调整和合理布置是九龙江流域非点源污染控制的重点。     

如何加强军用软件的质量管理

军用软件在武器装备系统中的地位已经越来越重要,但我国军用软件的质量管理起步较晚,因此很有必要研究如何加强军用软件的质量管理.本文在阐述软件生命周期的基础上,从开展军用软件研制单位的软件能力评价、加强软件配置管理和加强第三方独立测试三个方面探讨了如何加强军用软件的质量管理.     

Global experience curves for wind farms

In order to forecast the technological development and cost of wind turbines and the production costs of wind electricity, frequent use is made of the so-called experience curve concept. Experience curves of wind turbines are generally based on data describing the development of national markets, which cause a number of problems when applied for global assessments. To analyze global wind energy price development more adequately, we compose a global experience curve. First, underlying factors for past and potential future price reductions of wind turbines are analyzed. Also possible implications and pitfalls when applying the experience curve methodology are assessed. Second, we present and discuss a new approach of establishing a global experience curve and thus a global progress ratio for the investment cost of wind farms. Results show that global progress ratios for wind farms may lie between 77% and 85% (with an average of 81%), which is significantly more optimistic than progress ratios applied in most current scenario studies and integrated assessment models. While the findings are based on a limited amount of data, they may indicate faster price reduction opportunities than so far assumed. With this global experience curve we aim to improve the reliability of describing the speed with which global costs of wind power may decline.     

三维地震勘探中强声波干扰的压制

在三维地震资料采集中产生的声波为非线性干扰波,能量强,频谱宽,利用常规的分频去噪和线性压噪方法难以将其去除,使后续的资料处理效果受到影响。基于声波具有非常稳定的传播速度这一特点,提出了一种利用非线性变换手段压制强声波干扰的方法。方法原理是,首先对三维地震资料中含声波到达时间的某段记录(时窗)进行转换,将非线性声波时距关系转换为速度趋于无穷、波数趋于零的一组噪声;然后应用f-k滤波对这组噪声进行压制;最后,再通过逆转换得到声波压制后的结果。该方法易于实现,并只对声波到达时间处的小范围数据进行处理,数据量小,计算效率高。对实际三维地震资料的处理结果表明,该方法压制强声波干扰的效果非常明显。