Simulation of humidity control and greenhouse temperature tracking in a growth chamber using a passive air conditioning unit

In this paper, we define a dynamic discrete model of a passive air conditioning unit, without the more typical compression or absorption-refrigeration cycle. The unit is composed of heat exchangers, a positioning system and humid corrugated pads. The aim of the study was to follow the temperature in a greenhouse and to replicate it with a desired and stable relative humidity in a ventilated growth chamber. A control law, based on a quadratic criterion and dynamic programming, taking output error and energy consumption minimisation into account, was used to control the behaviour of the unit in spite of air intake disturbances. The results of the simulation indicate that the air conditioning unit can produce a variable climate in the growth chamber, with a wide range of relative humidity setpoints.     

Influence of Edible Films upon the Moisture Loss and Microstructure of Dietetic Sucrose-Free Sponge Cakes during Storage

The kinetics of changes in the bound water content in dietetic sucrose-free sponge cakes (DC) during storage was investigated. The effect of edible films of polymyxan, pectin, xanthan, and carboxymethylcellulose upon this kinetics was also investigated. The quantitative changes in both states of water (slightly bound water and strongly bound water) were registered by combined dynamic analysis (thermogravimetry analysis, TGA, and differential thermal analysis, DTA). The moisture changes in DC crumb were analyzed by drying out to constant mass. The rate constants were determined according the equation q = q_oe^-kt. The values of rate constants 'k', in day^-1, concerning the different edible films were as follows: for crumb moisture is (8.00 ≤ k ≤ 12.47) × 10^-3, for bound water is (3.07 ≤ k_w ≤ 6.26) × 10^-2, for slightly bound water is (4.22 ≤ k₁ ≤ 8.49) × 10^-2 and for strongly bound water is (2.02 ≤ k₂ ≤ 5.62) × 10^-2 as compared to 18.53 × 10^-3, 7.16 × 10^-2, 9.04 × 10^-2, and 5.36 × 10^-2 in the uncovered DC, respectively. The best water-retaining effect in respect to crumb moisture during storage was ascertained in the use of polymyxan and xanthan films. The lowest rate constant values for bound water and its two states were measured for DC covered with pectin. The relation between the kinetics of both bound water states during storage and ageing of the crumb of DC covered with different edible films and the crumb microstructure was represented. By means of scanning electron microscope was read the smallest change in crumb microstructure of pectin-covered DC on the sixth day of storage.     

Surface tension as a controlled variable in mechanical dishwashing

Using a continuous, in-line, nondestructive technique based on the maximum bubble pressure method, the surface tension of the wash water in a mechanical dishwashing machine has been monitored. This technique has enabled surface tension to be used as a controlled variable, providing feedback to regulate the amount of surfactant added. Assuming the mechanical force of the water spray is adequate to remove bound soil from the dish surface, the food soil may be titrated against surfactant, providing an indirect indication as to when the dishes are clean. This technique also could be applied to a recirculated wash solution for in-place cleaning.     

First-order modeling and stability analysis of illusory contours

In visual cognition, illusions help elucidate certain intriguing latent perceptual functions of the human vision system, and their proper mathematical modeling and computational simulation are therefore deeply beneficial to both biological and computer vision. Inspired by existent prior works, the current paper proposes a first-order energy-based model for analyzing and simulating illusory contours. The lower complexity of the proposed model facilitates rigorous mathematical analysis on the detailed geometric structures of illusory contours. After being asymptotically approximated by classical active contours, the proposed model is then robustly computed using the celebrated level-set method of Osher and Sethian [S. Osher, J.A. Sethian, Fronts propagating with curvature-dependent speed: algorithms based on Hamilton–Jacobi formulations, J. Comput. Phys., 79 (12) (1988) 12–49] with a natural supervising scheme. Potential cognitive implications of the mathematical results are addressed, and generic computational examples are demonstrated and discussed.     

Water reuse in a shrimp processing line: Safety considerations using a HACCP approach

The large consumption of water involved in food manufacturing is prompting food processors to optimise the use. Treating and reusing or recycling water within the food plant results in substantial reduction of water use and wastewater production and discharge. If implemented, water reuse should be integrated into existing HACCP programs, and HACCP plans specifically addressed to the actual reuse should be elaborated. This paper evaluates the microbiological safety issues associated with water recycling during the production of shrimps (Pandalus borealis) in brine, and it indicates how the hazards may be effectively controlled using a HACCP approach. Following these procedures, process water recovered from peeling during shrimp processing and treated by means of reverse osmosis could be recycled within the same food unit operation.     

Electrochemical characteristics of heme proteins in hydroxyethylcellulose film

A stable film made from hydroxyethylcellulose (HEC) on pyrolytic graphite (PG) electrode was employed for incorporating hemoglobin (Hb), myoglobin (Mb) and horseradish peroxidase (HRP), and the electrochemical characteristics of the proteins were studied correspondingly. Experimental results revealed that HEC film could greatly accelerate electron transfer between the proteins and electrode, and the proteins showed a thin layer electrochemical behavior in the film. Moreover, all the proteins in the film exhibited good catalytic activity towards the reduction of hydrogen peroxide (H₂O₂) in the low H₂O₂ concentration range. In the high concentration range, H₂O₂ would exhibit toxicity effect on the proteins. The electrochemical properties and electrocatalytic abilities of the three heme proteins in HEC film have been compared, and the optimal conditions for H₂O₂ biosensor fabrication have been obtained.     

Incidence of Listeria spp. in fish and environment of fish markets in Northern Greece

The incidence of Listeria spp. in the salt-water edible fish and in the environment of fish markets in Thessaloniki, Northern Greece was studied. One hundred and twenty raw/fresh fish bought at the fish markets of Thessaloniki (Northern Greece), were sampled and tested for presence of Listeria species using a two step enrichment procedure, followed by plating on two selective agars and subsequent biochemical identification of the isolates. Five fish samples were positive for Listeria spp. and in only one sample L. monocytogenes was detected. Also, 100 samples of knives, hands, boxes etc were sampled and 18 samples were positive for Listeria spp. and five for L. monocytogenes. L. innocua was more common being detected in four fish samples and 13 environmental samples. L. seeligeri was detected only in one environmental sample. Our findings indicate that only a few fish were contaminated with Listeria spp., while the level of contamination of the environment of fish markets was higher.