Improved aqueous solubility,bioaccessibility and cellular uptake of quercetin following pH-driven encapsulation in whey protein isolate

The purpose of this study was to increase the water solubility and potential bioavailability of quercetin by encapsulation in whey protein isolate (WPI) based on a green, efficient pH-driven method. According to the results, the water solubility of quercetin increased by 346.9: times after loading into WPI nanoparticles. When the initial quercetin concentration was 0.25 mg mL⁻¹ and WPI was 2% w/v, the encapsulation efficiency reached 94.1%, the Z-average diameter was 36.63 nm, and the zeta potential was −36.4 mV at pH 7.0. The fluorescence spectroscopy assay suggested the molecular complexation of quercetin and WPI at pH 12.0. X-ray diffraction assay indicated the enclosure of amorphous quercetin in WPI. Correspondingly, the bioaccessibility increased from 2.76% to 31.23% and the Caco-2 cell monolayer uptake increased from 0% to 2.12% after nanoencapsulation. This work confirmed that the pH-driven method is an effective approach to prepare WPI–quercetin nanocapsules to improve physical and potentially biological properties of quercetin.     

Pulsed electric field processing of a pomegranate (Punica granatum L.) fermented beverage

The aim of this study was to evaluate the effect of pulsed electric field (PEF) (11.7 or 18 kV/cm) and pasteurization (batch or slow (VAT) and high-temperature-short time (HTST)) on the microbial, physicochemical, bioactive and sensory characteristics of a pomegranate (Punica granatum) fermented beverage (PFB) through storage at 4 °C. Bioactive compounds (antioxidant capacity, phenolic compounds, flavonoids, anthocyanins content) and color were measured. The microbiological counts (initial mesophilic aerobic bacteria (MAB) of 9.77 × 10³ CFU/mL and initial molds plus yeasts (MY) of 2.04 × 10³ CFU/mL) showed that applying 6 ms of bipolar PEFs at 18 kV/cm with 200 Hz repetition frequency reduced the microbial loads in approximately 4-log cycles, remaining <10 CFU/mL of both types of microorganisms in the PFB. PEF barely affected the total soluble solids, pH, ethanol, total acidity and color. All PEF-treated and pasteurization samples showed a slight reduction in bioactive compounds during storage. In sensory acceptability, the lowest score was given to the VAT pasteurized sample; however, still acceptable (between like slightly and like moderately).Industrial relevanceThis research provides essential information on the microbiological, physicochemical, bioactive and sensory characteristics of a pomegranate fermented beverage processed with pulsed electric fields. The pulsed electric field processing of fermented beverages may provide criteria to the processing industry to use this novel technology as a processing method for delivering a microbiological safe beverage with good sensory and antioxidant characteristics to consumers.     

Combined effects of wheat gluten and carboxymethylcellulose on dough rheological behaviours and gluten network of potato–wheat flour-based bread

Incorporating high level of potato flour into wheat flour enhances nutritional values of bread but induces a series of problems that lead to the decline of the bread quality. To overcome the barrier, wheat gluten and carboxymethylcellulose (CMC) were added into potato–wheat composite flour to improve dough machinability and bread quality. The rheological properties, thermo-mechanical properties and microstructures of dough were investigated. The results showed that the interaction between gluten and CMC mitigated the discontinuity of gluten matrix and gluten protein aggregation caused by the addition of potato flour, which yielded a more branched and compact gluten network. The compact three-dimensional viscoelastic structure induced improvements of gas retention capacity and dough stability, making it mimic the machinability properties of wheat flour dough. Bread qualities were apparently improved with the combined use of 4% gluten and 6% CMC, of which specific volume increased by 42.86%, and simultaneously, hardness reduced by 75.93%.     

Study of metal assisted anisotropic chemical etching of silicon for high aspect ratio in crystalline silicon solar cells

Textured surface is commonly used to enhance the efficiency of silicon solar cells by reducing the overall reflectance and improving the light scattering. In this study, a comparison between isotropic and anisotropic etching methods was investigated. The deep funnel shaped structures with high aspect ratio are proposed for better light trapping with low reflectance in crystalline silicon solar cells. The anisotropic metal assisted chemical etching (MACE) was used to form the funnel shaped structures with various aspect ratios. The funnel shaped structures showed an average reflectance of 14.75% while it was 15.77% for the pillar shaped structures. The average reflectance was further reduced to 9.49% using deep funnel shaped structures with an aspect ratio of 1:1.18. The deep funnel shaped structures with high aspect ratios can be employed for high performance of crystalline silicon solar cells.     

Copper–4,4′-dipyridyl coordination compound as solid reagent for spectrophotometric determination of reducing sugar employing a multicommutation approach

In this work a multicommuted flow system employing copper–4,4′- dipyridyl coordination compound as the solid-phase reagent for the spectrophotometric determination of reducing sugar was developed. The coordination compound was synthesized through a reaction of the 4,4′-dipyridyl and copper (II) nitrate, under hydrothermal conditions. The complex was characterized by infrared spectroscopy (FTIR), power X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and thermogravimetric analysis (TGA). Based on the characterization, a multicommuted spectrophotometric procedure for the determination of reducing sugar using copper (II) complex as solid reagent is proposed. The proposed method was based on the redox reaction between a monosaccharide, such as fructose and glucose (reducing sugar) and Cu(II). This reaction, mediated in an alkaline medium, produces a yellow compound that can be determined by absorption electronic spectroscopy (λ_ABS = 420 nm). Under optimum experimental conditions, a linear response ranging from 1.0 to 20.0 g L⁻¹ (R = 0.9978 and n = 5), a detection (3σ criterion) and quantification (10σ criterion) limit estimated at 0.23 and 0.75 g L⁻¹, respectively, a standard deviation relative of 4.7% (n = 7), for a reference solution of 10.0 g L⁻¹ reducing sugar, and a sampling rate of 75 determinations per hour were achieved. The proposed system was applied to the determination of reducing sugars in coconut water and juices. The analysis of ten samples and the application of the t-test to the results found, and those obtained using reference procedures (AOAC), provided no significant differences at a 95% confidence level. This system enabled the analysis of reducing sugar with ease and simplicity, providing a significant economy of the solid reagent (600 μg per determination) and reducing effluent generation.     

采用信息增益率的混合入侵检测模型设计

针对现有混合入侵检测模型仅定性选取特征而导致检测精度较低的问题，同时为了充分结合误用检测模型和异常检测模型的优势，提出一种采用信息增益率的混合入侵检测模型.首先，利用信息增益率定量地选择特征子集，最大程度地保留样本信息；其次，采用余弦时变粒子群算法确定支持向量机参数构建误用检测模型，使其更好地平衡粒子在全局和局部的搜索能力，然后，选取灰狼算法确定单类支持向量机参数构建异常检测模型，以此来提高对最优参数的搜索效率和精细程度，综合提高混合入侵检测模型对攻击的检测效果；最后，通过两种数据集进行仿真实验，验证了所提混合入侵检测模型具有较好的检测性能.     

Fracture behavior of cylindrical porous alumina with pore gradient

In this study, laminated cylindrical porous alumina materials with a pore gradient along the radial direction are fabricated by combining a lower sintering temperature with the presence of an organic-former (PMMA particles). It has been proved that pore morphology can be controlled by the lamination method in the centrifugal molding technique. The fracture behavior of the porous laminated alumina with a pore gradient is investigated by using the ring compression testing. An analytical formula to account for the pore gradient is introduced to calculate fracture strength based on the curved beam theory. There are two types of fracture behavior, which are not related to the lamination process and vary with the amount of pore-former. In the case of the same porosity, a reduction in fracture strength is observed with increase in the number of laminated layers, and the minimum strength is found in continuous graded cylinders.     

Detection of acylated homoserine lactones in gram-negative proteolytic psychrotrophic bacteria isolated from cooled raw milk

Through a mechanism called quorum sensing, bacteria are able to express specific genes in response to population density. Cell-to-cell communication in bacteria is mediated by signal molecules such as acylated homoserine lactones (AHLs). This work aimed to detect AHL production in Gram-negative psychrotrophic bacteria isolated from raw milk. A total of 84.9% of the bacteria were identified as AHL producers eliciting a diversity of responses in the AHL-monitor systems. These results demonstrate that AHL-production is common among psychrotrophic bacteria isolated from milk, and indicate that quorum sensing may play an important role in the spoilage of this product.     

Preparation of metallic silver from Ag2S slurry by direct hydrogen reduction under hydrothermal conditions

Metallic silver has been prepared by direct hydrogen reduction of Ag₂S in basic slurry under hydrothermal conditions. The XRD pattern and SEM micrographs of the reaction product are given. Metallic silver was predominant in the reduction product obtained by using ZnO as additive and PdCl₂ as catalyst at 220 °C, pH 12.0 and 2–3 MPa of partial hydrogen pressure for 4 h.     

利用RSS推送的主动服务解决藏书呆滞的研究

将通过系统提取的读者兴趣及需求信息与不断更新的RSS资源库进行比对,筛选出最能满足用户要求的RSS信息,并通过RSS主动推送技术,将资源及时发送给读者,是提高馆藏图书利用率,减少图书呆滞量的一种有效途径。