Remarkably enhanced energy storage properties of lead-free Ba0.53Sr0.47TiO3 thin films capacitors by optimizing bottom electrode thickness

The lead-free Ba_0.53Sr_0.47TiO₃ (BST) thin films buffered with La_0.67Sr_0.33MnO₃ (LSMO) bottom electrode of different thicknesses were fabricated by pulsed laser deposition method on a (001) SrTiO₃ substrate. It was found that the roughness of electrode decreases and substrate stress relaxes gradually with the increase of LSMO thickness, which is beneficial for weakening local high electric field and achieving higher E_b. Therefore, the recoverable energy density (W_rec) of BST films can be greatly improved up to 67.3 %, that is, from 30.6 J/cm³ for the LSMO thickness of 30 nm up to 51.2 J/cm³ for the LSMO thickness of 140 nm after optimizing the LSMO thickness. Furthermore, the thin film capacitor with a 140 nm LSMO bottom electrode shows an outstanding thermal stability from 20 °C to 160 °C and superior fatigue resistance after 10⁸ electrical cycles with only a slightly decrease of W_rec below 1.6 % and 3.7 %, respectively. Our work demonstrates that optimizing bottom electrodes thickness is a promising way for enhancing energy storage properties of thin-film capacitors.     

Nonlinear response in glass fibre non-crimp fabric reinforced vinylester composites

This paper addresses the nonlinear stress-strain response in glass fibre non-crimp fabric reinforced vinylester composite laminates subjected to in-plane tensile loading. The nonlinearity is shown to be a combination of brittle and plastic failure. It is argued that the shift from plastic to brittle behaviour in the vinylester is caused by the state of stress triaxiality caused by the interaction between fibre and vinylester. A model combining damage and plasticity is calibrated and evaluated using data from extensive experimental testing. The onset of damage is predicted using the Puck failure criterion, and the evolution of damage is calibrated from the observed softening in plies loaded in transverse tension. Shear loading beyond linear elastic response is observed to result in irreversible strains. A yield criterion is implemented for shear deformation. A strain hardening law is fitted to the stress-strain response observed in shear loaded plies. Experimental results from a selection of laminates with different layups are used to verify the numerical models. A complete set of model parameters for predicting elastic behaviour, strength and post failure softening is presented for glass fibre non-crimped fabric reinforced vinylester. The predicted behaviour from using these model parameters are shown to be in good agreement with experimental results.     

Performance of miniaturized direct methanol fuel cell (DMFC) devices using micropump for fuel delivery

A fuel cell is a device that can convert chemical energy into electricity directly. Among various types of fuel cells, both polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) can work at low temperature (<80 °C). Therefore, they can be used to supply power for commercial portable electronics such as laptop computers, digital cameras, PDAs and cell phones. The focus of this paper is to investigate the performance of a miniaturized DMFC device using a micropump to deliver fuel. The core of this micropump is a piezoelectric ring-type bending actuator and the associated nozzle/diffuser for directing fuel flow. Based on the experimental measurements, it is found that the performance of the fuel cell can be significantly improved if enough fuel flow is induced by the micropump at anode. Three factors may contribute to the performance enhancement including replenishment of methanol, decrease of diffusion resistance and removal of carbon dioxide. In comparison with conventional mini pumps, the size of the piezoelectric micropump is much smaller and the energy consumption is much lower. Thus, it is very viable and effective to use a piezoelectric valveless micropump for fuel delivery in miniaturized DMFC power systems.     

Charge transport and luminescent properties of PMMA-dehydrate nanotubed titanic acid nanocomposites

In this paper, we doped p-type conductivity dehydrated nanotubed titanic acid (DNTA) into insulator polymer poly(methyl methacrylate) (PMMA). The electric properties of this nanocomposite were investigated. The photoluminescence efficiency of fluorescent dye 4-(dicyanomethylene)-2-t-butyl-6(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) in PMMA matrix was enhanced by doping with DNTA. Moreover, screen effect by DNTA with high permittivity caused the emission from DCJTB to be blue-shifted.     

An efficient face segmentation algorithm based on binary partition tree

This paper presents an efficient face segmentation algorithm based on binary partition tree. Skin-like regions are first obtained by integrating the results of pixel classification and watershed segmentation. Facial features are extracted by the techniques of valley detection and entropic thresholding, and are used to refine the skin-like regions. In order to segment the facial regions from the skin-like regions, a novel region merging algorithm is proposed by considering the impact of the common border ratio between adjacent regions, and the binary partition tree is used to represent the whole region merging process. Then the facial likeness of each node in the binary partition tree is evaluated using a set of fuzzy membership functions devised for a number of facial primitives of geometrical, elliptical and facial features. Finally, an efficient algorithm of node selecting in the binary partition tree is proposed for the final face segmentation, which can exactly segment the faces without any underlying assumption. The performance of the proposed face segmentation algorithm is demonstrated by experimental results carried out on a variety of images in different scenarios.     

母线保护选型配置原则及整定计算

以220kV变电站母线保护为例,介绍母线保护选型配置及整定计算原则。     

Image cipher using image filtering with 3D DNA-based confusion and diffusion strategy

Neural Computing and Applications - In this paper, an image cipher is presented based on DNA sequence operations, image filtering and memrisitve chaotic system. Firstly, plain image is preprocessed...     

Exploiting 2D compressed sensing and information entropy for secure color image compression and encryption

Neural Computing and Applications - Compared to 1D compressed sensing (CS), 2D CS is more efficient for compressing the plaintext image from two directions, but security level of current 2D...     

团队项目训练法在《国际贸易实务》教学中的应用

团队项目训练法是项目教学法的延伸和发展,也是设计教学法、体验教学法、情景模拟教学法等行动导向教学方式的综合运用。文章浅析了团队项目训练法在高职《国际贸易实务》课程教学中的应用,说明团队项目训练法对于调动学生积极性和主动性、培养学生思考能力和观察能力、提高教学效果等方面具有显著的成效,并总结了开展团队项目训练需要注意的问题。