Research on Crop Irrigation Schedules Under Deficit Irrigation—A Meta-analysis

Water Resources Management - Increasing water consumption in agriculture due to global climate change has posed considerable challenges to food security, thus improving the efficiency of water...     

新发展阶段中国水资源安全保障战略对策

进入新发展阶段，中国水资源安全保障需要以“节水优先、空间均衡、系统治理、两手发力”治水思路为指导，厘清问题、研判趋势、优化对策，支撑新阶段水利高质量发展。本文在全面分析我国水资源安全保障存在的突出问题与面临形势基础上，阐述了新发展阶段中国水资源安全保障的基本思路与战略路径，从保证资源安全、构建国家水网、强化供水保障、建设美丽河湖、改善水环境质量等方面提出了战略对策和需要进一步回答的重大问题，以期为完善新发展阶段中国水资源安全保障战略，全面提高国家水资源安全保障能力提供有力支撑。     

A zirconium-free glaze system for sanitary ceramics with SiO2-CaCO3-TiO2 composite opacifier containing anatase: Effect of interface combination among SiO2, CaCO3 and TiO2

TiO₂ is an ideal substitute to ZrSiO₄ ceramic opacifier, yet it is limited to application because of the undesirable yellowing resulting from rutile formation. Herein, the SiO₂-CaCO₃-TiO₂ composite opacifier (Si-Ca-Ti) was constructed. The glaze used Si-Ca-Ti presents a superior opacification performance than ZrSiO₄ opacified glaze without causing yellowing, showing L*, a*, b* values of 94.81, -0.67 and 3.23. By comparison, the glaze using SiO₂, CaCO₃, and TiO₂ mixture shows lower opacification and yellowish surface with L* and b* values of 92.99 and 5.36. It is revealed that there is a close interface bonding among SiO₂, CaCO₃ and TiO₂ in Si-Ca-Ti, which promotes their combination reaction to generate opacification phase titanite and inhibit rutile formation when sintering, resulting in the white surface and opacification improvement of the glaze. This study proposes a green and efficient strategy to achieve white and highly opacified glaze for sanitary ceramics, exhibiting good application prospect.     

Study on maximum power point tracking of photovoltaic array in irregular shadow

Traditional maximum power point tracking (MPPT) methods can hardly find global maximum power point (MPP) because output characteristics curve of photovoltaic (PV) array may have multi local maximum power points in irregular shadow, and thus easily fall into the local maximum power point. To address this drawback, Considering that sliding mode variable structure (SMVS) control strategy have such advantages as simple structure, fast response and strong robustness, and P&O method have the advantages of simple principle and convenient implementation, so a new algorithm combining SMVS control method and P&O method is proposed, besides, PI controller is applied to reduce system chattering caused by switching sliding surface. It is applied to MPPT control of PV array in irregular shadow to solve the problem of multi-peak optimization in partial shadow. In order to verity the rationality of the proposed algorithm, the experimental circuit is built, which achieves MPPT control by means of the proposed algorithm and P&O method. The experimental results show that compared with the traditional P&O algorithm, the proposed algorithm can fast track the global MPP, tracking speed increases by 60% and the relative error decreased by 20%. Moreover, the system becomes more stable near the MPP, the fluctuations of output power is greatly reduced, and thus make full use of solar energy.     

Alkali catalyzed liquefaction of corncob in supercritical ethanol–water

Corncob liquefaction in supercritical ethanol–water was performed with and without the addition of an alkali catalyst by direct addition or biomass impregnation in a 250-cm³ batch reactor. The effects of temperature, solvent and alkali addition on the biomass conversion level and oil yield were investigated to find the optimum condition. For non-catalytic liquefaction using a 1:1 (v/v) ethanol: water ratio, a maximum oil yield and conversion level of 49.0% and 93.4%, respectively, were obtained at 340 °C. For alkali catalytic liquefaction, the oil yield with KOH addition (57.5%) was higher than that from KOH-impregnated corncob liquefaction (43.3%). The oil from liquefaction with KOH addition had higher heating value (26.7–35.3 MJ kg⁻¹) than the corncob (19.1 MJ kg⁻¹). The dominant components of the obtained oil were found by GC/MS analysis to be aldehyde, ester, phenol derivatives and aromatic compounds.     

消力池底板块的失稳破坏机理及其防护措施

本文根据国内外一些高坝消力池和水垫塘失事破坏的调查资料，说明了脉动压力在引起破坏中的作用。从理论上分析了脉动压力的基本特征及其分布规律、板块上脉动上举力的产生机理，论证了脉动上举力是导致消力池底板揭底破坏的主要原因。论述了合理设置止水设施、排水设施以及锚固措施等对防止破坏的效果，讨论了计入脉动荷载的底板块稳定性设计准则，提供了消力池底板块的设计和防护参数。     

Strength and chemical resistance of mortars containing brick manufacturing clays subjected to different treatments

This paper presents the results of an investigation of the properties of mortar in which a calcined clay was employed as a pozzolan. Mortars were prepared using either heat treated clay or ground waste clay bricks (from the same clay subjected to 1000 °C calcining) as a pozzolanic partial replacement for cement at replacement levels of 10%, 20% and 30%. The compressive strengths of the mortars were monitored up to 90 days and the resistance to sodium sulphate solution and synthetic seawater was monitored up to 300 days. The specimens were also monitored for weight changes. Partially replacing cement by ground brick or heat-treated brick clay gives early strengths that are lower than that of the control. At 90 days, however, the strengths are the same as or are greater than that of the control. Heat-treated clay is effective in reducing expansion during exposure of the mortar to sulphate solution and synthetic seawater. The rapidly cooled clay gives better performance, in terms of strength development and resistance to harmful solutions, than the slow cooled clay.     

Organochlorine and Mercury Residues in Young-of-the-Year Spottail Shiners from the Detroit River,Lake St. Clair,and Lake Erie

Young-of-the-year spottail shiners (Notropis hudsonius) were used as biomonitors to determine the spatial distribution (1982/83) and assess trend data for organochlorine and mercury residues. Significantly (p < 0.01) higher PCB residues were found in Detroit River spottail shiners than in collections from southwestern Lake St. Clair and northwestern Lake Erie. The highest PCB residues were found in the west bank collections from Michigan waters (912–2,997ng/g) compared to the mid-stream (96–290 ng/g) and east bank collections (153–316 ng/g). Chlordane residues were found to be elevated in all spottail shiner samples from urbanized areas. Octachlorostyrene and ∑ DDT residues were distributed uniformly within the study area, whereas mercury concentrations were found to be lower in spottail shiners from northwestern Lake Erie than in comparable samples from the Detroit River and southwestern Lake St. Clair. Residues for BHC, heptachlor, aldrin, and chlorinated benzenes were near their detection limits; mirex and chlorinated phenols were not detectable. Recent (1982/83) PCB residue levels in spottail shiners exceeded the IJC aquatic life objective (Great Lakes Water Quality Agreement of 1978) at all the sites sampled, except at Pike Creek in Lake St. Clair. PCB residues in spottail shiners from Pike Creek, Big Creek, and Leamington have declined significantly (p < 0.01) since the mid-seventies. Mercury and chlordane residues have decreased in spottail shiner samples from Leamington, but have remained virtually unchanged at Big Creek and Pike Creek.     

Variance-based sensitivity analysis of the probability of hydrologically induced slope instability

Analysis of the sensitivity of predictions of slope instability to input data and model uncertainties provides a rationale for targeted site investigation and iterative refinement of geotechnical models. However, sensitivity methods based on local derivatives do not reflect model behaviour over the whole range of input variables, whereas methods based on standardised regression or correlation coefficients cannot detect non-linear and non-monotonic relationships between model input and output. Variance-based sensitivity analysis (VBSA) provides a global, model-independent sensitivity measure. The approach is demonstrated using the Combined Hydrology and Stability Model (CHASM) and is applicable to a wide variety of computer models. The method of Sobol’, assuming independence between input variables, was used to identify interactions between model input variables, whilst replicated Latin Hypercube Sampling (LHS) is used to investigate the effects of statistical dependence between the input variables. The SIMLAB software was used, both to generate the input sample and to calculate the sensitivity indices. The analysis provided quantified evidence of well-known sensitivities as well demonstrating how uncertainty in slope failure during rainfall is, for the examples tested here, more attributable to uncertainty in the soil strength than to uncertainty in the rainfall.     

三峡蓄水初期水库近坝区水环境特性分析

通过现场观测和数值模拟的方法，对三峡水库近坝区在蓄水初期的水流和水环境特性进行了 分析。对蓄水初期的溶解氧、BOD、COD和NH3-N、Cu等水质参数进行了观测，将蓄水初期水质资料与蓄水之前的结果进行了对比，分析了近坝区水环境变化趋势。采用大涡模拟紊流模型，考虑水体表面的热交换，对三峡近坝区的流动和水温分布特性进行了模拟。研究结果表明，三峡水库蓄水初期近坝区水流特性明显改变，主要表现为水深增加、流速变缓，部分地段有回流区出现。水质指标变化不明显，坝前断面溶解氧浓度、悬浮物浓度有所降低，和悬浮物密切相关的污染物总磷、重金属也随之降低；蓄水初期139m水位时坝前水域尚没有出现温度分层现象。