Ir(III) and Ru(II) Complexes in Photoredox Catalysis and Photodynamic Therapy: A New Paradigm towards Anticancer Applications

Individually, photoredox catalysis (PC) and photodynamic therapy (PDT) are well-established concepts that have experienced a remarkable resurgence in recent years, leading to significant progress in organic synthesis for PC and clinical approval of anticancer drugs for PDT. But, very recently, new photoredox catalyst systems based on Ir(III) and Ru(II) complexes have garnered significant interest because they can simultaneously be used as PDT agents apart from their demonstrated PC activity. This highlight discusses the unique PC behavior of emerging Ir(III)- and Ru(II)-based systems while also examining their potential PDT activity in cancer treatment.     

Enhanced transduction coefficient in piezoelectric PZT ceramics by mixing powders calcined at different temperatures

Large transduction coefficient ($d_{33}\times g_{33}$) is difficult to obtain in piezoelectric ceramics because these two parameters show opposite trends with compositional modifications. Herein, the Pb(Zr_0.53Ti_0.47)O₃ ceramic powders were calcinated under different temperatures (A:830 °C, B:860 °C, and C:890 °C), and then mixed together according to different weight ratios (1A:1B:1C, 1A:2B:1C, 1A:2B:3C and 3A:2B:1C) for ceramics preparation. Both d₃₃ and g₃₃ are improved successfully, and the transduction coefficient with the weight ratio of 1A:2B:3C reaches up to 17,500 × 10⁻¹⁵ m²/N, which is 60 % higher than that with the powders calcinated under 830 °C, and at least twice those of commercial PZT-4, PZT-5A and PZT-8 ceramics. The improved transduction coefficient is owing to the enhanced piezoelectric constant and spontaneous polarization resulted from the increased grain size, relative density and the fraction of tetragonal phase. These results indicate that this is a simple but effective way to tailor the transduction coefficient in piezoelectric ceramics.     

NaFeTiO4: A novel visible light active photocatalyst for water splitting and environmental remediation

Single phase, crystalline NaFeTiO₄ with tunnel structure is prepared by a solid state method and explored as a novel photocatalyst for the first time. Structural, optical and morphological properties of NaFeTiO₄ are investigated by various characterization techniques such as X-ray diffraction (XRD), scanning & transmission electron microscopy (SEM & TEM), Energy dispersive X-ray spectroscopy (EDS), N₂ adsorption-desorption study (BET), UV-vis, X-ray photoelectron, X-ray absorption (UV-vis DRS, XPS and XANES) and photoluminescence (PL) spectroscopy. The interfacial charge transfer ability of the prepared n-type NaFeTiO₄ was also investigated by transient photocurrent response and electrochemical impedence spectroscopy which proved to be an efficient tool for better understanding of electronic properties of NaFeTiO₄. The photocatalytic efficiency of NaFeTiO₄ is evaluated for decomposition of methylene blue (MB) and Rhodamine B (RhB) dyes as well as for H₂ evolution through water splitting reaction under visible light. NaFeTiO₄ exhibits efficient charge separation properties, excellent photocatalytic activities and reusability.     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

Effects of pore structure and electrolyte on the capacitive characteristics of steam- and KOH-activated carbons for supercapacitors

Four kinds of activated carbons (denoted as ACs) with specific surface area of ca. 1050 m² g⁻¹ were fabricated from fir wood and pistachio shell by means of steam activation or chemical activation with KOH. Pore structures of ACs were characterized by a t-plot method based on N₂ adsorption isotherms. The amount of mesopores within KOH-activated carbons ranged from 9.2 to 15.3% while 33.3–49.5% of mesopores were obtained for the steam-activated carbons. The pore structure, surface functional groups, and raw materials of ACs, as well as pH and the supporting electrolyte were also found to be significant factors determining the capacitive characteristics of ACs. The excellent capacitive characteristics in both acidic and neutral media and the weak dependence of the specific capacitance on the scan rate of cyclic voltammetry (CV) for the ACs derived from the pistachio shell with steam activation (denoted as P-H₂O-AC) revealed their promising potential in the application of supercapacitors. The ACs derived from fir wood with KOH activation (denoted as F-KOH-AC), on the other hand, showed the best capacitive performance in H₂SO₄ due to excellent reversibility and high specific capacitance (180 F g⁻¹ measured at 10 mV s⁻¹), which is obviously larger than 100 F g⁻¹ (a typical value of activated carbons with specific surface areas equal to/above 1000 m² g⁻¹).     

Leakage mitigation in NW FET using negative Schottky junction drain and its process variation analysis

Journal of Computational Electronics - In this work, a Schottky junction on the drain side employing low workfunction (WF) metal is proposed as a method to suppress the OFF-state leakage in...     

Thermal Modeling of Tool-Work Interface during Friction Stir Welding Process

Russian Journal of Non-Ferrous Metals - Adequate heat input provided by the proper combination of friction stir welding (FSW) parameters is critical to sound welding. Optimum parameter setting...     

Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

MLS4531立式辊磨的开发与研制

在研究国内外立式辊磨的基础上开发出MLS4531立式辊磨,结合工程实际优化了技术参数、研磨机构及其附属装置。在调试中对MLS4531立式辊磨的液压系统,安全装置进行了改进。     

大型铸件成形过程数值模拟及工艺优化

用工程湍流模式计算大型铸件充型凝固过程三维速度场、温度场时,对提高模拟计算精度和效率进行了探讨。应用新的计算方法对大型不锈钢和合金铸铁件进行数值模拟,优化其铸造工艺。