超支化聚合物的性能、合成及其功能化应用研究

超支化聚合物，具有多端基的“缺陷核壳”空间结构，化学反应性活泼，易于改性，与相应的线型聚合物相比，拥有特殊的性能，在多领域展现出广阔的应用前景。随着合成技术的进步，它们的应用研究，尤其是功能化的应用研究，成为多年来的研究热点。主要介绍超支化聚合物的结构、性能、合成及其功能化应用研究概况。     

弱导光纤的标量衍射光束特性分析

仿照罗兰圆光学系统构造罗兰球光学系统 ,在罗兰球中简化电磁波的瑞利 索末菲标量衍射积分公式 ,推导出折射率阶跃分布的弱导光纤LP模衍射场分布和空间频谱的计算公式。提出LP0 1模远场衍射分布存在类似于平面波圆孔夫琅禾费衍射艾里斑的中央亮斑概念 ,并给出中央亮斑角半宽度的计算公式。     

Maximum bubble loads: Experimental measurement vs. analytical estimation

This paper presents an experimental technique to measure maximum bubble loads, which are then compared with geometrical model estimations. The geometrical models studied assume that a particle monolayer, having a square arrangement, covers the entire bubble surface. Comparison of the experimental and analytical results gave a fairly high statistical correlation (R² = 0.89), when a shape factor was used for particle volume estimation (λ = 0.32–0.41; [Kelly, E.G., Spottiswood, D.J. Introduction to Mineral Processing, John Wiley & Sons, 1982, p. 491]). This supports the applicability of geometrical models for maximum bubble load estimation.     

非线性锥形梯度折射率透镜的光学特征

本文对非线性锥形梯度折射率透镜进行了分析,根据稳态自聚焦理论以及ABCD定律,导出了高斯光束通过这种透镜光斑尺寸及其位置的公式。讨论了几种特殊的情况,得到了一些重要的结果。     

高沸石配比陶瓷纤维复合纸制备中助留剂的选择

考察了沸石复合纸板制备中助留剂对无机物留着的影响。结果表明,PDADMAC或A-PAM单元体系、PVAm/A-PAM二元助留体系的作用效果差,PDADMAC/A-PAM二元助留体系的留着效果显著,PDADMAC的相对分子质量对留着效果的影响不大,PDADMAC与A-PAM的电荷量比是决定无机物留着的主要因素,本研究的条件下,最佳正负电荷量比为3.0～5.0。     

Biomimetic synthesis of spherical nano-hydroxyapatite in the presence of polyethylene glycol

Spherical nano-hydroxyapatite (nano-HA) was synthesized successfully by a biomimetic method using Ca(NO₃)₂·4H₂O and (NH₄)₃PO₄·3H₂O as reagents in the presence of polyethylene glycol (PEG). The crystalline phase, microstructure, chemical composition, and morphology of the obtained samples were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). The results show that spherical nano-HA with diameter of 30–50 nm can be synthesized in the presence of a certain concentration (2–6%) of PEG. The crystallinity of HA powder synthesized in the presence of PEG was higher than that synthesized in the absence of PEG, but the crystallinity of HA reduced with increasing the concentration of PEG. The electrical conductivity (EC) of the solution revealed that PEG reduced the transfer rate of Ca²⁺ in the process of HA crystallization, indicating the interaction between PEG and HA. The possible mechanism of formation spherical nano-HA was discussed.     

A unified formulation of Kautz network and generalized hypercube

Hypercube and Kautz network each possess certain desirable properties. However, some of the attractive features of one network are not found in the other. A novel class of network topologies proposed in this paper has the generalized hypercube and the Kautz network as its two extremes. The proposed network inherits the topological properties of both the Kautz network and the generalized hypercube to a varying degree. This allows us to trade-off cost and performance effectively and construct networks which are most suitable for a particular purpose. In the present paper, we investigate the connectivity, wide-diameter, fault-tolerance, Hamiltonicity.     

Synthesis of NaYF4:20% Yb3+,2% Er3+,2% Ce3+@NaYF4 nanorods and their size dependent uptake efficiency under flow condition

Lanthanide doped fluorescent nanoparticles have gained considerable attention in biomedical applications. However, the low uptake efficiency of nanoparticles by cells has limited their applications. In this work, we demonstrate how the uptake efficiency is affected by the size of nanoparticles under flow conditions. Using the same size NaYF₄:20% Yb³⁺,2% Er³⁺,2% Ce³⁺ (the contents of rare earths elements are in molar fraction) nanoparticles as core, NaYF₄:20% Yb³⁺,2% Er³⁺,2% Ce³⁺@NaYF₄ core–shell structured nanorods (NRs) with different sizes of 60–224 nm were synthesized by thermal decomposition and hot injection method. Under excitation at 980 nm, a strong upconversion green emission (541 nm, ²H_11/2 → ⁴I_15/2 of Er³⁺) is observed for all samples. The emission intensity for each size nanorod was calibrated and is found to depend on the width of NRs. Under flow conditions, the nanorods with 96 nm show a maximum uptake efficiency by endothelial cells. This work demonstrates the importance of optimizing the size for improving the uptake efficiency of lanthanide-doped nanoparticles.     

Zr替代Ti对Ti19．5V40Mn16．2Cr9．8Ni14．5合金的影响Ⅱ：电化学性能

在对合金微观结构和储氢性能研究的基础上，详细考察了少量Zr取代Ti对Ti19．5V40Mn16．2Cr9．8Ni14．5合金电化学性能的影响。通过观察电极的充放电行为，并结合EIS及多种极化曲线的分析结果，发现少量Zr对Ti的取代能够显著提高合金电极的实际电化学容量和循环稳定性，而且还能在一定程度上改善合金的电极动力学性能。对于这些性能的改善，从合金微观结构方面进行了解释。     

聚合物材料脆韧转变判据及影响因素分析

综述了聚合物共混增韧机理包括弹性体增韧、刚性粒子增韧、弹性体与刚性粒子协同增韧等研究进展；着重介绍了临界基体层厚度、损伤竞争准数、分子链参数、临界界面黏结条件、临界特征长度等几种源于单一粒子填充的脆韧转变判据，并分析其在复合粒子填充改性聚合物中的适用性。此外，还结合增韧机理和脆韧转变判据讨论了基体性能、分散相状态及相间界面黏结强度等因素对复合体系韧性的影响，提出寻找合适的复合分散相、适当调整复合粒子的结构比例、改善相间界面黏结以及设计最佳断裂路径仍将是今后努力的方向。