Fabrication and laser performances of Yb:Sc2O3 transparent ceramics from different combination of vacuum sintering and hot isostatic pressing conditions

In this paper we report on the preparation and laser performance of transparent 3at.% Yb:Sc₂O₃ ceramics by reactive sintering of commercially available powders under vacuum followed by hot isostatic pressing (HIP). Combinations of different vacuum sintering temperatures (1650 °C and 1750 °C) and different HIP treatments (1700 °C and 1800 °C at 200 MPa) were tested in order to understand how these steps influence the microstructure and thus the optical and lasing properties of the ceramic samples. All the samples showed a good optical quality. The microstructure analysis and the laser tests showed that the vacuum pre-sintering temperature is the key factor determining the quality of the samples and the laser performances. The best values of slope efficiency i.e. η_L = 50 % and output power i.e. P_out = 6.62 W were obtained for the sample pre-sintered under vacuum at 1650 °C and hot isostatically pressed at 1800 °C.     

A simple approach for fabrication of interconnected graphitized macroporous carbon foam with uniform mesopore walls by using hydrothermal method

Three-dimensional (3D) highly interconnected graphitized macroporous carbon foam with uniform mesopore walls has been successfully fabricated by a simple and efficient hydrothermal approach using resorcinol and formaldehyde as carbon precursors. The commercially available cheap polyurethane (PU) foam and Pluronic F127 were used as a sacrificial polymer and mesoporous structure-directing templates, respectively. The graphitic structure of carbon foam was obtained by catalytic graphitization method using iron as catalyst. Three different carbon foams such as graphitized macro-mesoporous carbon (GMMC) foam, amorphous macro-mesoporous carbon (AMMC) foam and graphitized macroporous carbon (GMC) foam were fabricated and their physicochemical and mechanical properties were systematically measured and compared. It was found that GMMC possess well interconnected macroporous structure with uniform mesopores located in the macroporous skeletal walls of continuous framework. Besides, GMMC foam possesses a well-defined graphitic framework with high surface area (445 m²/g), high pore volume (0.35 cm³/g), uniform mesopores (3.87 nm), high open porosity (90%), low density (0.30 g/cm³) with good mechanical strength (1.25 MPa) and high electrical conductivity (11 S/cm) which makes it a promising material for many potential applications.     

Optimal Spectral-Galerkin Methods Using Generalized Jacobi Polynomials

We extend the definition of the classical Jacobi polynomials withindexes α, β>−1 to allow α and/or β to be negative integers. We show that the generalized Jacobi polynomials, with indexes corresponding to the number of boundary conditions in a given partial differential equation, are the natural basis functions for the spectral approximation of this partial differential equation. Moreover, the use of generalized Jacobi polynomials leads to much simplified analysis, more precise error estimates and well conditioned algorithms.Mathematics subject classification 1991. 65N35, 65N22, 65F05, 35J05     

WO3/CeO2/YSZ nanocomposite as a potential catalyst for methanol reforming

A WO₃/CeO₂/YSZ nanocomposite material [W/Zr nominal atomic ratio = 0.025, Ce/Zr nominal atomic ratio = 0.020] was prepared by wet impregnation and characterized by means of X-ray photoelectron and diffuse reflectance infrared Fourier transform spectroscopic techniques, X-ray diffraction and thermal analysis.Both tungsten and cerium oxides are significantly reduced at the interface with YSZ: Ce(III), in particular, seems to be the prevailing species.The interaction of the WO₃/CeO₂/YSZ nanopowder with pyridine and CO₂ allowed to investigate the acidic/basic sites. Weak contributions at 1602, 1625 and 1647 cm⁻¹ suggest the presence of Lewis and Brønsted acidic sites, whereas basic sites are not evidenced by the interaction with carbon dioxide. The presence of tungsten oxide causes the decrement of the acidic/basic sites, as indicated by the comparison with the results obtained on the CeO₂/YSZ support. Consistently, the interaction with methanol is mainly molecular.The oxidation of methanol was investigated both in the absence and in the presence of water. In the last case carbon dioxide starts forming from room temperature.     

校园网络安全应急响应联动系统模型

网络安全应急响应联动系统的目的是充分协调地理上分布的资源,共同应对网络安全事件。以目前的应急响应技术为基础,结合校园网络安全的应急响应实践,建立了校园网络安全应急响应联动系统模型,分析了联动系统的体系结构、功能结构和安全策略。     

访问控制策略描述语言与策略冲突研究

访问控制技术是网络安全防范和保护的主要方法,能保证信息的完整性和机密性。随着计算机、互联网和无线通信技术的高速发展,网络安全问题日益严重,访问控制策略的研究已成为计算机学科的一个热点课题。本文首先介绍了五种主要的访问控制策略描述语言,分析了各自的特点及适用环境;然后总结了访问控制策略冲突产生的原因、类型、冲突检测以及冲突消解方法;最后给出了访问控制策略研究的发展趋势。     

N-萘乙酰基-N''''-邻甲氧基苯甲酰基氨基硫脲的合成与表征

利用α-萘乙酰基异硫氰酸酯与芳基酰肼的加成反应合成了一种新型的酰氨基硫脲衍生物--N-萘乙酰基-N'-邻甲氧基苯甲酰基氨基硫脲,其结构经元素分析、红外光谱、1HNMR和13CNMR所确证.     

Industrial TiO2 based nacreous pigments as functional building materials: Photocatalytic removal of NO

In this paper, the photocatalytic activity of industrial titanium dioxide (TiO₂) based nacreous pigments was researched as functional building materials for photocatalytic NO remove. Three industrial TiO₂ based nacreous pigments were selected to estimate the photocatalytic activity for NO remove. This study is a good proof that pearlescent pigments can eliminate NO, and its performance is positively correlated with its titanium dioxide content. And this research will widen the application of nacreous pigments in functional building materials, and provide a new way to eliminate in door nitric oxide pollution.     

新型离子液体气相色谱固定相研究

合成了一种用作新型气相色谱固定相的室温离子液体[C7H17NO] [(CF3SO2)2N]-,并考察其色谱性能。该固定相具有较好的成膜性、较高的柱效、较强的极性,对正构烷烃、芳香族化合物以及一些位置异构体具有良好的分离效果。