Study on Sintered Synthetic Hercynite Clinker

Special grade bauxite and roll scale were used as raw materials to investigate the influences of reducing atmosphere and firing temperature on sintering clinker. The results showed that: 1) The mixture of the materials could be sintered enough to synthesise hercynite under reducing atmosphere by adding reducing reagent ; 2) The hercynite dinker could be sintered to high density and the content of FeAl2O4 may attain 80～90% under the firing tempera-ture of 1550℃.     

A new calculation method of feedback controller gain for bilinear paper-making process with disturbance

This paper presents a new method to calculate the feedback control gain for a class of multivariable bilinear system, and also applied this method on the control of two sections of paper-making process with disturbance. The robust H∞ control problem is to design a state feedback controller such that the robust stability and a prescribed H∞ performance of the resulting closed-loop system are ensured. The controller turns out to be robust with respect to the disturbance in the plant. Utilizing the Schur complement and some variable transformations, the stability conditions of the multivariable bilinear systems are formulated in terms of Lyapunov function via the form of linear matrix inequality (LMI). The gain of controller will be calculated via LMI. Finally, the application examples of a headbox section and a dryer section of paper-making process are used to illustrate the applicability of the proposed method.     

SiCp/Al基复合材料制备工艺的优化

本文利用热压烧结技术制备了性能优良的SiCp5vol%Al基复合材料,利用正交实验对参数进行了优化。结果表明,SiCp5vol%Al基复合材料的最佳工艺参数为烧结温度600℃、高温压力70MPa、保压时间7min。     

羧甲基纤维素接枝丙烯酰胺高吸水树脂的制备

以羧甲基纤维素、丙烯酰胺为原料,采用氧化还原引发体系,通过自由基接枝共聚制备了高吸水树脂,分别考察了原料配比、引发剂浓度、交联剂浓度、聚合温度、树脂粒径等因素对高吸水树脂吸收能力的影响,确定了最佳制备条件.     

基于双线性对的k-匿名隐私保护方案研究

针对移动互联网环境下位置服务的隐私保护问题,基于双线性对性质和k-匿名的思想,提出了一个高服务质量的隐私增强方案。通过终端在欧几里得距离环形区域内均匀生成2k个虚假位置,利用位置熵、位置分散度和地图背景信息从中筛选出k-1个虚假位置,进而达到更优的k-匿名效果。通过安全性分析,本方案不仅满足隐私性、匿名性、不可伪造性等安全特性,而且能够抗查询服务追踪攻击;仿真实验表明,本方案虚假位置节点选取具有更优的均匀度,同时在假节点生成和选取效率也有所提高。     

环己烷催化氧化催化剂的研究进展

综述了国内外环己烷选择性氧化催化剂的研究进展,对目前环己烷氧化所用催化剂体系进行了总结及比较分析,重点介绍了分子筛催化剂体系中TS-1、MCM、SBA-15等分子筛催化体系.     

A general transformation from KP-ABE to searchable encryption

Users are inclined to share sensitive data in a remote server if no strong security mechanism is in place. Searchable encryption satisfies the need of users to execute a search encrypted data. Previous searchable encryption methods such as “public key encryption with keyword search (PEKS)” restricted the data access to certain users, because only the assigned users were able to search the encrypted data. In this paper we will discuss the relation between Attribute Based Encryption (ABE) and searchable encryption and define a weak anonymity of the ABE scheme, named “attribute privacy”. With this weak anonymity, we propose a general transformation from ABE to Attribute Based Encryption with Keyword Search (ABEKS) and a concrete attribute private key-policy ABE (KP-ABE) scheme. We present an ABEKS scheme based on this KP-ABE scheme and permit multi-users to execute a flexible search on the remote encrypted data.     

热溶过滤法脱除煤焦油沥青中喹啉不溶物的研究

以5种煤焦油沥青为原料,喹啉为溶剂,研究了热溶过滤法脱除喹啉不溶物(QI)等杂质的效应,目的是制备QI含量较低的净化沥青。结果表明:热溶过滤法可以有效地脱除喹啉不溶物,QI脱除率随滤网网目增加而提高,但阻力增加,脱除时间变长。综合考虑脱除率和实际可操作性,采用1000目的滤布,QI含量可以降到0.3%以下,基本能达到要求。采用凝胶色谱对QI脱除后沥青的组成和分子量分布的研究表明,热溶过滤脱除了沥青中的大分子组分,分子量减小,分子量分布变窄。     

Electrochemical performance of gel-cast NiO-SDC composite anodes in low-temperature SOFCs

NiO-Ce_0.8Sm_0.2O_1.9 (SDC) composites were synthesized using gel-casting technique. The electrochemical performance of the gel-cast (GC) Ni-SDC cermet as anode was investigated contrast with that fabricated from traditional mechanical mixing (MM) technique using fuel cells with about 35 μm-thick SDC electrolyte and Sm_0.5Sr_0.5CoO₃-SDC cathode. Maximum power density of the cell with GC anode achieved 491 mW cm⁻² at 600 °C, over 100 mW cm⁻² larger than that with MM anode, inferring high catalytic activity of the GC anode. Impedance measurements on the fuel cell at open circuit showed that the anodic interfacial polarization resistance of the GC anode was 0.1 Ω cm² lower than that of the MM anode. Long-term stability of the cell with GC anode in hydrogen was also performed, which showed that it can stabilize at least 7 days.     

Interface structure and mechanical properties of the brazed joint of TiC cermet and steel

A commercially available Ag–Cu braze alloy foil with Zn was used to join TiC cermet and steel. According to the experimental observations, the interface structure is (Cu, Ni)/Ag (s.s.) + Cu (s.s.)/(Cu, Ni)/(Cu, Ni) + (Fe, Ni) from TiC cermet to steel side. With increased brazing temperature or time, the amounts of (Cu, Ni) near the base metals/Ag–31Cu–23Zn interface and (Cu, Ni) + (Fe, Ni) near the Ag–31Cu–23Zn/steel interface increase, while the amount of Ag (s.s.) + Cu (s.s.) in the middle of the braze alloy decreases. The whole joining process consists of diffusion and solution among atoms of the braze alloy foil and base metals. The maximum shear strength is 120.7 MPa for the joint brazed at 850 °C for 10 min.