Transparent niobate glass-ceramics for optical limiting

The construction of nonlinear optical materials featuring asymmetric transmission of light is of great technological importance for various applications, including optical switching and optical power limiting. A significant challenge is the scalable fabrication of material candidates with good photochemical stability, high optical transmittance, and excellent optical limiting performance. Here, we present a nanocrystallization avenue for constructing hybrid optical limiting materials that exhibit ultrafast and robust optical limiting performance. The experimental results show that the controllable relaxation of a niobate glass may lead to the clustering of Nb-O units and contracting of the bandgap. It results in the notable improvement in nonlinear optical properties, including the enhanced saturation irradiance (380 GW/cm²), doubly increased nonlinear coefficient, and decreased limiting threshold (200 GW/cm²). Our results suggest a promising material that exhibits promising applications for protecting eyes and sensitive components from laser-induced damage.     

Towards type-selective carbon nanotube growth at low substrate temperature via photo-thermal chemical vapour deposition

Carbon nanotubes have been intensively researched for electronic applications, driven by their excellent electronic properties, where the goals are control and reproducibility of growth, semiconducting/metallic type selectivity and maintaining high quality of carbon nanotubes, in a process that is temperature-compatible with the electronics. Photo-thermal chemical vapour deposition can achieve these goals and, through a thorough investigation of the parameter space, we achieve very high nanotube-quality and growth rates, and produce a phase-diagram that reveals distinct regions for growing semiconducting and metallic single-walled nanotubes, as well as multi-walled. Correlation with the carbon-catalyst phase diagram allows for the development of a novel growth model. We propose that the temperature-gradient induces carbon diffusivity-gradient across the catalyst to yield the high growth rate. This is attributed to the increase of α-iron of catalyst. The growth control demonstrated here allows for integration of the nanotube growth process by photo-thermal deposition into mainstream electronics manufacture.     

Third order optical nonlinearities characteristics of Disperse Red1 organic dye molecules inside of polymeric nanocapsules

Measuring nonlinear optical response of a specific material in a mixture, not only leads to investigate the behavior of a particular component in various circumstances, but also can be a way to select suitable combination and optimum concentration of additives and therefore obtaining the maximum nonlinear optical signals. In this work, by using dual-arm Z-scan technique, the nonlinear refractive index of Disperse Red1 (DR1) organic dye molecules inside the core of prepared polymeric nanocapsules was measured among various materials which prepared nanocapsules were made of them. Then the measured value was compared with nonlinear refractive index of DR1 solved in dichloromethane.     

Synthesis and characterization of poly (linoleic acid)-g-poly(methyl methacrylate) graft copolymer with applying in Au/PLiMMA/n-Si diode

Poly (linoleic acid)-g-poly(methyl methacrylate) (PLiMMA) graft copolymer was synthesized and characterized. PLiMMA graft copolymer was synthesized from polymeric linoleic acid peroxide (PLina) possessing peroxide groups in the main chain by free radical polymerization of methyl methacrylate. Later, PLiMMA was characterized by proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques. Furthermore, Au/PLiMMA/n-Si diode was fabricated for the purpose of investigating PLiMMA׳s conformity in diodes. The main electrical characteristics of this diode were investigated using experimental current–voltage (I–V) measurements in dark and at room temperature. Obtained results, such as sufficiently high rectifying ratio of 4.5×10⁴, indicate that PLiMMA is a promising organic material for electronic device applications.     

The effect of baking time,fillet radius,and hardness on the lifecycles of pole fastening screws in an electric motor with hydrogen embrittlement

In order to protect bolts from corrosion, electroplating such as zinc plating is widely used. However, hydrogen can easily penetrate or diffuse into the vacancies and dislocations between the lattices of bolt steel during electroplating. As the diffused hydrogen defects inside the lattice are in gaseous form, small cracks can easily be produced due to high pressure from the hydrogen gas. In this research, in order to determine the root cause of the fracture in pole fastening screws resulting from hydrogen embrittlement in typical electric motors, additional factors that accelerate hydrogen embrittlement fracture were selectively applied, including a small fillet in the head–shank transition and excessive hardness, and parametric study was performed experimentally.     

Application of cold filamentary microplasma pretreatment assisted by thermionic emission for potato drying

Cold filamentary microplasma (CFM) pretreatment assisted by thermionic emission (TE) is a promising, cold drying technology for agricultural products. Such novel pretreatment method based on local electroporation process in the air gap. Brief theory and treatment mechanism are explained. A fractional factorial design 3³ was used to determine the effect of CFM treatment assisted by TE parameters such as pulse frequency (F = 40, 80 and 120 Hz), pretreatment duration (D = 60, 120 and 180 s) and temperature of thermionic source (T = 700, 850 and 1000 °C) on drying time and drying rate of potato samples. Maximal CFM pretreatment effect was observed at frequency of 80 Hz, treatment duration of 120 s and temperature of thermionic source of 1000 °C, and the corresponding drying rate and drying time were 35·10⁻⁵ (kg/kg s⁻¹) and 130 min. The use of CFM treatment had minor effects on the main quality characteristics (total sugar and starch content) of potato samples. Fourier-transformed infrared spectroscopy confirmed the absence of any modifications of functional group composition of potato samples after CFM pretreatment. Results indicate that cold pulsed filamentary microplasma can enhance the drying rate and decrease drying time without changes in quality characteristics.Practical applicationsCold filamentary microplasma pretreatment assisted by thermionic emission can improve the efficiency of potato drying. Furthermore, it has potential application for reducing energy consumption in drying. CFM pretreatment could be potentially applied for agricultural products drying.     

Sol-Gel Preparation and Spectroscopic Properties of Modified Sodium Silicate /Tartrazine Dye Nanocomposite

Silicon - Thin film nanocomposites of sodium silicate (80 SiO2 –20 Na2O)/ tartrazine dye (E102) prepared using sol gel process in acidic system. The change in the physicochemical properties...     

Influences of magnetic fields on current–voltage characteristics of gold-DNA-gold structure with variable gaps

Achieving highly sensitive magnetic sensors by means of Metal-DNA-Metal (MDM) structure is a key issue. DNA, being a genetic information carrier in living cells reveals tunable semiconducting response in the presence of external electric and magnetic fields, which is promising for molecular electronics. The influence of magnetic fields up to 1200 mT on the current–voltage (I–V) behavior of Gold-DNA-Gold (GDG) structure having variable gap sizes from 20–50 μm are reported in this work. These structures were fabricated using UV lithography, DC magnetron sputtering and thermal evaporation techniques. DNA strands were extracted from Boesenbergia rotunda plant via standard protocol. The acquired I–V characteristics display the semiconducting diode nature of DNA in GDG structures. The potential barrier for all the structures exhibit an increasing trend with the increase of externally imposed magnetic field irrespective of variable gap sizes. Furthermore, the potential barrier in GDG junction at higher magnetic field strengths (>1000 mT) is found to be considerably enhanced. This enhancement in the junction barrier height at elevated magnetic fields is attributed to the reduction of carrier mobility and augmentation of resistance. The achieved admirable features of magnetic sensitivity suggest the viability of using these GDG sandwiches as a prospective magnetic sensor.     

Dynamic Effects of Submillimeter Wave Radiation on Biological Objects of Various Levels of Organization

We have presented an overview of the literature and of our experimental data on the influence of electromagnetic radiation in the submillimeter spectral region on biological objects of molecular, cellular, and organism levels. Possible physical mechanisms involved and the reasons for limited development of the research in this spectral range are discussed.     

Investigation of performance variations due to the amplitude of group-delay ripple in chirped fiber Bragg gratings

We measure the system impacts due to the amplitude of group-delay (GD) ripple in single and cascaded chirped fiber Bragg gratings (CFBGs). Signals with smaller pulse width result in smaller performance variation at the same data rate. A 65-ps peak-to-peak GD ripple induces 0.9, 1.7, and 2.7 dB maximum penalties for 10, 20, and 40-Gb/s, respectively. We also find that cascading gratings with random ripple causes much less degradation than cascading gratings with the same ripple profile.